This is possibly the biggest font I will ever create, and probably the one I'm most proud of at that. The original was built over the course of 4 months, and I'm very, very happy with how it turned out. Along with all of the 25 basic categories, I included 23 of my own - some finished, some unfinished. This has been a long process, sometimes fun, sometimes tiring, but I hope you find this font useful. Luckily, with all of the scripts it works with, it should have a use for everyone :) Please enjoy!
I am open to comments, suggestions and any other feedback. If you would like me to add another script, I am open to the task! :)
Edit: It's been more than a year and I'm still going strong! 6731 characters total. Trying to knock-off some smaller / less used scripts. :)
Jan 22, 2024: Fully finished font! 7500 total characters.
Thanks to everyone who has liked or downloaded! :)
mono 7x11 pixel font
times ive downloaded this font: 9
Current version includes Basic Latin, More Latin, Extended Latin A-E (E only has one complete glyph though), a nearly-finished Even More Latin, Greek and Coptic, Cyrillic, Hebrew, Braille Set, and some other stuff
Sizes of 6 and/or 12pt (or multiples of them) are recommended so that the font doesn't smoothen or gain translucent pixels.
Has support for 104 languages (according to FontDrop)
This font was last edited: 21:20 UTC 19. June 2020
I was looking for a localization friendly pixel font and could not find any that had good coverage and was not outrageously expensive ($700+) for commerical usage. Thats why I created "PixelLocale".
This font is intended to be reminiscent of the original Pokemon Red/Blue games. Too see how they differ check out this image: https://imgur.com/ixoYRtd
It was important to me to create a consistant looking font across scripts.
You can use it however you like, 100% free with no attribution. Lets make the world more accessible.
Coverage:
Latin characters (815/815),
Greek and Coptic (119/119),
Cyrillic (263/263),
Georgian (83/83)
Hebrew (86/86) (Fontstruct has poor support form Niqqud and Cantillation)
Bopomofo (37/37) (Need feedback)
I'd love to add more scritps. When I started my goal was to have every glyph supported by Fontstruct, but after learning that support for many asian scripts was limited I halted. If someone can shed some light on these limitations and how severe they are and for what scripts they apply, please let me know. I can be reached at "johste[at]chumpware[dot]com".
Ver. 1.0(Beta, 9.21.2021): 1st release
--------------(When to start adding Chinese characters)---------------
Ver. 2.0(Beta): I found an Expert mode, so I added some Kanjis(一, 亜, 咽 and etc.)
Ver. 2.01(2022.05.22, Beta): More extended latin A and Added 31 Kanjis
Ver. 2.02(2022.05.25, Beta): Completed Latin ext_A block
Ver. 2.03(2022.05.26, Beta): Added CJK symbols block
Ver. 2.04(Beta): Plan of adding 20 Kanjis and Fixing glyph bugs
Ver. 2.05(2022.07.10, Beta): Added some of KS X 1001 symbols
Ver. 2.06(2022.07.11): Added 59 glyphs of Kanjis
Ver. 2.07(2022.07.12):Added some of Latin Ext_B glyphs
Ver. 2.08(2022.07.13):Added 30 glyphs of Kanjis more Latin Ext_B glyphs
Ver. 2.09(2022.07.14):Completed Latin Ext_B block and Added 15 glyphs of Hanjis and Fixed some of Hanji glyph's Bugs
Ver. 2.10(2022.07.18):Completed Hangul Compatibility Jamo Block and Added some glyphs of Latin Extended Additional Blocks
Ver. 2.11(2022.07.24):Completed Basic Russian Cylliric letters on 'Cylliric blocks'
Ver. 2.12(2022.07.25):More glyphs on Latin Exteneded Additional Blocks
-(CJK Unified Chinese Character Simplified Chinese Character Addition Start Time)------------------------------------------------------------
Ver. 3.0(2022.09.8~12): Added 30 glyphs of Cjk for Simplified Chinese
Ver. 3.1(2022.9.20): Some of more Kanjis
Ver. 3.1(2022.10.2~7): Added 30 glyphs of Kanjis
Ver. 3.2(2022.10.20~22): Added some of more kanjis
Ver. 3.21(2022.10.30): Added 8 glyphs of Cjk for Simplified Chinese
Ver. 3.3(2022.11.4):Added 10 glyphs of Latin and 6 glyphs of Hanguls
Ver. 3.4(2022.11.10):Added 21 glyphs of Cjk for Simplified Chinese
Ver. 3.41(2022.11.22):Added 10 glyphs of Cjk for Simplified Chinese
Ver. 3.41(2022.11.24):Added 15 glyphs of Cjk for Simplified Chinese
Ver. 3.42(2022.11.25):Added 10 glyphs of Cjk for Simplified Chinese
Ver. 3.43(2022.12.17):Added 15 glyphs of Cjk for Simplified Chinese
Ver. 3.5(2022.12.10):Added 10 glyphs of Cjk for Modern Chinese
Ver. 3.51(2022.12.21):Added 5 glyphs of Cjk for Modern Chinese
Ver. 3.6(2023.03.13):Added 10 glyphs of Cjk for Modern Chinese
Added so far of unified Kanji(Chinese) counts:Total of 293 glyphs
--------------------------Plans----------------------------------
1. Completing JIS 1 level of Kanjis
2. Completing JIS 2 level of Kanjis
3. Completing JIS 3 level of Kanjis
4. Making 2,351 glyphs of Hanguls(10/2351)
5. Adding extended Latin glyphs up to 'Latin extended additional'
6. Completing basic Arabic blocks
7. Completing Hanji glyphs on 'List of Frequently Used Characters in Modern Chinese'
8. Completing Hanji glyphs on 'BIG 5 Common Character Set'
9. Completing KS X 1001 symbols
10. Completing Hanji glyphs on 'Table of General Standard Chinise Character'
11. Completing 'Russian cylliric' block
12. Completing Hanji glyphs on 'Xim Sans' (Total of 17912 glyphs)
I was annoyed that there was really no good recreation of the Minecraft font. So I made one and added some stuff like Hiragana and Katakana. :)
Pixelcraft, my second font (v0.0.7), I’ll make this many glyphs
v0.0.0 - Beginning
v.0.0.1 Extended Latin B
v0.0.2 Extended Latin A
v.0.0.3 Greek and Coptic
v.0.0.4 Cyrillic
v.0.0.5 Extended Cyrillic
v.0.0.6 Arabic
v.0.0.7 Devanagari (tomorrow)
easily one of my largest fonts.
Includes Latin, Hebrew, Cyrillic, and more.
6x5 pixel script I made for use with the Latin, Cyrillic, Arabic, and Devanagari alphabets; diacritics are integrated. 5x5 pixels are dedicated to base symbols, and the uppermost pixel is reserved for diacritics.
This is another clone of Monkey (my monospace lanky font); it should be very similar to the original except for the lower x-height and the added accented characters (More Latin/Latin-1, Latin Extended A, Latin Extended B, and now Even More Latin/Latin Extended Additional). It is 16 blocks tall and 6 blocks wide; all letters without diacritics are at most 9 above the baseline and at most 3 below, but the accents push the height of a letter up by 3 blocks (or rarely 4), and the box drawing characters extend even higher, to 16 blocks from descender to the highest point. This font uses the FontStruct 2x2 filter method with plenty of composite and stacked bricks, which lets the curves look good at large sizes while remaining sharp on the screen at normal sizes. Mandrill will look strange in the FontStruct preview if you zoom in or out, but if you download it, it will look sharp at size 16 or 12 (depending on the program).
This is a clone of MonkeyCurrently Supports:
- English
- Some Latin
- Russian Cyrillic
- Google Fonts
- Georgian
- Hebrew
- Armenian
- Greek
- Thai
- Currency Symbols
- Arabic (WIP)
- Japanese/Katakana
- Bopomofo
I used Tile Molester (I didn't name it that way!) and extracted the Earthbound and Mother 2 font (English ROM and Japanese ROM) that was used in the game's menu and tried to combine and insert them here myself. (I used the Earthbound's Latin instead of Mother 2's bolder one, because most recognize it that way)
I've added a few hundred more glyphs to it, hoping this may come in handy for some fans out there. ^^ I'll add more languages (maybe use all the glyphs available) if you request it, otherwise, I'll only leave it at 878 glyphs. ;D
This font includes:
- Basic Latin
- More Latin
- Extended Latin A
- Extended Latin B
- Katakana
- Hiragana
- Greek and Coptic
To reference the game a little more... Katakana Middle Dot, More Latin's Middle Dot, and More Latin's Bullet are actually the middle dots that you see in the Japanese and English character naming screen, respectively. ^^
I don't have status conditions and the battle font in here, because it's pretty much its own font and I honestly can't find it in the game's file for some reason... (no clue what settings to use see those)
these font are here Sumia Open by Vienna Binders (AskGamerViennaBinders) Rekank Fix C by Dmitriy Sychiov (Sychoff) Kaak123
RULES: Do not say this font saying i hate this font this font is bulls*it or f*** off this font in the comments and dont make a font like a same font
correct answer that you can copy
Just in case anybody wanted a small, serifed, pixel-sharp font with personality and figure (old-style) numerals, I whipped this up... then overachieved, perhaps. It has full Latin-1 and Latin Extended-A support, extended punctuation, most Greek, and as much Cyrillic as I could justify working on. It also has some Roman numerals, many arrows, and a few other random things.
If anyone out there actually wishes to use this for setting anything with Greek or Cyrillic alphabets, please let me know if I've made any terrible errors or if more characters are desired. I know better than to trust my typographical sense for alphabets I don't use in an actual language context!
This was a simple idea started from S and T. Most of the glyphs have two verticle strokes that are 4-bricke-wide and a 1-brick-wide area in the middle of the character. except I, L, S and T (actually a lot more). They are a bit different. Especially S, T and L. The whole characters are only 8 bricks wide. As I mentioned above, It's because the whole font started from these characters.
Straka the name came from last name of a person. The S and T reminds me of this person's last name. I like this last name although I don't even know him.
About the Latin extension, I have made only the glyphs that require no new design, just diacritics and already made letters. So I can pretend like hard-working on fonts but copy paste in reality. :P
Also, I made Arabic glyphs. Only isolated forms. Which I suppose won't be a comfortable experience to Arabic users. It's like every letter has crazy swashes but every letters are lightyears away from each other.(or is it?)
Credit me bcuz it took days and I gave it all to you for free. Unthankful hairless ape. :p
has it gone 2 far? hope it didn't hurt you.