It's the fancy cursive font from "resource2.dat" from Cube World. Turns out, its actually the 'Venice' font by Susan Kare & Bill Atkinson from the original classic Macintosh, so I've added all the remaining characters from the original font which the cube world version didn't have.

Cube World is Copyright 2010-2019 Picroma e.K.

A non-pixelated font heavily inspired by the Cube World "resource1.dat" font. This font matches the character presentation from the Cube World alpha version. Hence, the star and filled circle do not appear in place of the plus-minus and registered trademark symbols, so it will look a little strange if used in the steam version.

Version 20191026.c

A font based on the Cube World 'resource1.dat' font, but with a few missing international characters added. This font variant respects the Cube World Steam release, which has a star in place of the 'PLUS-MINUS SIGN' (U+00B1), and a filled circle/coin in place of the 'REGISTERED SIGN' (U+00AE). The original 'correct' symbols (from the Cube World alpha release) for those two characters have been placed at (U+2213, but flipped upside down) and (U+24C7) respectively.

The font is all caps. The font may appear slightly smaller in-game than the original font did, but I could not work around this issue despite trying to adjust the filter/scaling.

To use this font in-game, download and extract it, and rename the .ttf file to 'resource1.dat', and paste it replacing the original file in the Cube World installation directory.

I tried to accurately reflect the somewhat odd pixel spacing of the original font, where it used 5x5 blocks of pixels, where the block was either entirely empty, entirely filled, filled with a 4x4 block offset to one corner, or filled with a 2x2 block offset to one corner. The only character that does not follow this rule is the Star character.

Cube World is Copyright 2010-2019 Picroma e.K.

If the copyright holders of Cube World wish this font to be removed from Fontstruct, please leave a note and I will remove it ASAP.

If you're playing the Cube World steam release, this is probably the font you want. The star is in place of the ± symbol, so the UI looks correct. This variant has much cleaner lowercase characters.

Cubish EPX is a re-imagining of the 'resource1.dat' block letter font from Cube World, now with less coarse pixelization and more consistent 'EPX-style' pixel filtering for smoother angles and spacing. A number of unclear characters have been cleaned up as well, especially in the international extended Latin characters. A dot was added to the numeral zero to disambiguate it from the letter O, as well.

20191010.k

An accurate re-rendition of the 'resource1.dat' font from Cube World. All of the 'pixels' of the font are made up of 5x5 patterns. (Well, for every character except the star, which uses a different 2x2 pattern.) This font follows the exact original ordering of characters from the alpha, but also puts the steam release star and filled circle at their correct unicode offsets.

Version 20190923.a

Cube World is Copyright 2010-2019 Picroma e.K.

If the copyright holders of Cube World wish this font to be removed from Fontstruct, please leave a note and I will remove it ASAP.

If you're playing the Cube World steam release, this is probably the font you want. The star is in place of the ± symbol, so the UI looks correct.

Cubish EPX is a re-imagining of the 'resource1.dat' block letter font from Cube World, now with less blocky pixelization and more consistent 'EPX-style' pixel filtering and spacing. A number of unclear characters have been cleaned up as well, especially in the international extended Latin characters. A dot was added to the numeral zero to disambiguate it from the letter O, as well.

20190926.a

Cubish EPX Extended... Cubish EPX, now with lowercase letters!

Cubish EPX is a re-imagining of the 'resource1.dat' block letter font from Cube World, now with less blocky pixelization and more consistent 'EPX-style' pixel filtering and spacing. A number of unclear characters have been cleaned up as well, especially in the international extended Latin characters. A dot was added to the numeral zero to disambiguate it from the letter O, as well.

Version 20190922.e

This is a version of 'Cubish EPX' with the star replacing the ± symbol, and a filled circle replacing the ® symbol, and no other changes. The steam release of Cube World very likely wants the font like this.

Cubish EPX is a re-imagining of the 'resource1.dat' block letter font from Cube world, now with less blocky pixelization and more consistent 'EPX-style' pixel filtering and spacing. A number of unclear characters have been cleaned up as well, especially in the international extended Latin characters. A dot was added to the numeral zero to disambiguate it from the letter O, as well.

20190923.1 - fixed euro symbol

Cubish EPX is a re-imagining of the 'resource1.dat' block letter font from Cube World, now with less pixel-ification and more consistent 'EPX-style' pixel filtering and spacing. A number of unclear characters have been cleaned up as well, especially in the international extended latin characters. A dot was added to the numeral zero to disambiguate it from the letter O, as well.

Please note that unlike the Cube World font from the 2019 steam release (but like the 2013 alpha), the ® and ± characters are actually those characters, and the filled circle and the star characters appear at their correct unicode offsets. If you want a font with the ® replaced with a filled circle, and the ± character replaced with a star, see 'Cubish EPX Tweaked'.

20190923.1 - fixed euro symbol by request

"There is no spoon."

----------------------------------

A remake of an older font of mine.

I think it looks better now.

A drop-shadow-less variant of the pixel font used on a certain famous series of Roguelike RPG games.

For role playing gaming. I want to be able to check off effects to different letters. Checkov's Gun is a fiction trope. So CheckovsFun is a play on words.

OFFICAL FONT T-SHIRT

This is an enhanced version of the retro font you see on old games. Still WIP. The squares are just placeholders and will be removed shortly. I hope to make this have more characters than any other fonts in the future (this might take a while). This font can be used in retro-style games, computer graphics, or anything else you can imagine. This font is pixelated, meaning it is lightweight and easy to port to many devices.

This is the font for the game Starbound: https://starbounder.org All credit goes to the developers and owners of Starbound, this is mainly for hobby/personal use and not commercial use.

Arcade Pixel

Megaten 20XX is a monospaced sans-serif pixel font recreation based on the original typeface appearing in the Super Famicom video game Shin Megami Tensei II, developed and released by Atlus in 1994.

The character set of this font was notably expanded with many additional special characters, diacritic variants, unique glyphs, and the like, each one of them designed to match the spirit and style of the original font design. Also included is the full original set of Japanese characters.

To recreate the original in-game appearance of this font, I recommend to choose font sizes that are multiples of 7pt and avoid any anti-aliasing or other font smoothing methods.

~ Megaten 20XX by Caveras - a pixel font recreation based on an original font from the SNES video game Shin Megami Tensei II ~

Please contact me if you wish to license this font for commercial purposes!

© Copyright & created by Caveras.

This is a 6 pixel font based on the first alpha release of Dungeon Keeper  from a surviving video I found on youtube. There are two fonts one smaller and one larger. This is the reproduction of the smaller font.  The unique square look of W and M as well as  U Q O S G C J  give it a unique character and help it stay readable at small sizes.

Let's play dominoes! All 49 tiles in the basic set are here, from double-blank to double-6. (There is no good way to map these tiles onto alphanumerics, so you kind of have to hunt for a particular tile until you get to know where they are. The doubles are on the corresponding number keys; e.g., double-4 is on the 4 key. The remaining were mapped on a grid with sequential letters. Caps and lower case are inverse tiles; e.g., 5-3 is on the q key, while 3-5 is Q.) Enjoy!

This is far from the first recreation of the original Nintendo DS system font, but it certainly is one of the most comprehensive variants, including about 800 characters.

NDS12 features a vast array of diacritics, common foreign characters, full Japanese hiragana and katakana character sets, buttons, arrows, unique glyphs, and many, many more.

The font is a 1:1 rebuild based on various games, expanded with many characters that couldn't be found in any game.

The base font size and recommended setting for NDS12 is 10pt and multiples of that. Use metric kerning and no additional smoothing effects for the ultimate handheld pixel experience.

~ NDS12 - created by Caveras after the original system font of the Nintendo DS. ~

Filgaia is a monospaced sans-serif pixel font recreation based on the original font appearing in the Sony PlayStation video game Wild Arms, developed by Media Vision and released by Sony in 1996.

The character set of this font was notably expanded with many additional special characters, diacritic variants, unique glyphs, and the like, each one of them designed to match the spirit and style of the original font design.

To recreate the original in-game appearance of this font, I recommend to choose font sizes that are multiples of 11pt and avoid any anti-aliasing or other font smoothing methods. The font is named after the world that Wild Arms takes place in.

~ Filgaia by Caveras - a pixel font recreation based on an original font from the SNES video game Tales of Phantasia ~

This stylish pixel font is a combined recreation of the original font appearing in the SNES brawler Kouryuu no Mimi and the font used for the inofficial English fan translation. Both fonts are very different in style, shape and measurements, but I mixed them together as there are no overlaps on any glyphs.

The character set of Kouryuu includes a vast array of additional diacritic variants (which do not appear in-game), number variations, bonus characters, unique glyphs, and also full sets of the Japanese hiragana and katakana alphabets and other Asian glyphs from the original Japanese version of the game. Every character that doesn't pop up in the game has been designed to match the look and feel of the base characters.

I recommend to use this one with font sizes that are multiple of 11pt and avoid any font smoothing or anti aliasing methods.

~ Kouryuu by Caveras - a font recreation based on original fonts from the SNES game Kouryuu no Mimi, developed and released by VAP in 1995. ~

Phantalia is a monospaced sans-serif pixel font recreation based on an original font appearing in the SNES video game Tales of Phantasia, developed by Wolf Team and released by Namco in 1995.

The character set of this font was notably expanded with many additional special characters, diacritic variants, unique glyphs, and the like, each one of them designed to match the spirit and style of the original font design. Also included are the full hiragana and katakana character sets from the original Japanese version of the game.

To recreate the original in-game appearance of this font, I recommend to choose font sizes that are multiples of 6pt and avoid any anti-aliasing or other font smoothing methods.

~ Phantalia by Caveras - a pixel font recreation based on an original font from the SNES video game Tales of Phantasia ~

This beautiful font is a recreation of an original font appearing in the SNES strategy game Romance of The Three Kingdoms IV: Wall of Fire, released as Sangokushi IV in Japan. It's my second Koei font recreation after Ishmeria (from the game Gemfire) and I think it's a very pretty and stylish font.

The character set of Sangoku4 includes a vast array of additional diacritic variants, number variations, bonus characters, unique glyphs, and also full sets of the Japanese hiragana and katakana alphabets from the original Japanese version of the game.

I recommend to use this one with font sizes that are multiple of 16pt and avoid any font smoothing or anti aliasing methods.

~ Sangoku4 by Caveras - a font recreation based on an original font from the SNES game Romance of The Three Kingdoms IV: Wall of Fire, developed and released by Koei in 1994. ~

Pixel font recreation based on two of the main fonts appearing in the Syndicate game for the SNES.

The font is a 1:1 rebuild and appears exactly as in-game. I have also added many of more common characters, diacritics, and other gylphs that don't show up in the game. A full set of the Japanese version's katakana characters is also included.

The base font size and recommended setting for Syntricate is 5pt and multiples of that. Use metric kerning and no additional smoothing effects for the ultimate pixel experience.

Syndicate on the SNES was developed by Bullfrog Productions and released by Ocean Software in 1993.

~ Syntricate - created by Caveras based on original fonts used in Syndicate for the Super Nintendo. ~

WWareTypeC is another recreation of one of the many stylish WarioWare: D.I.Y. pixel fonts. This recreation includes over 400 characters, among them the most common diacritic letters and several special characters.

The font is a 1:1 rebuild based on WarioWare: D.I.Y. for the Nintendo DS and appears exactly as in-game. I added countless of common characters and some gylphs that don't show up in the game or font rip.

This is only the first of several WarioWare fonts I have planned to redo. The base font size and recommended setting for WWareTypeC is 26pt and multiples of that. Use metric kerning and no additional smoothing effects for the ultimate WarioWare pixel experience.

WarioWare: D.I.Y. for the Nintendo DS was developed by Intelligent Systems and Nintendo SPD, and published by Nintendo in 2009.

~ WWareTypeC - created by Caveras after an original font used in WarioWare: D.I.Y. for the Nintendo DS. ~