First attempt at a cursive pixel font. The name derives from an old joke band, whose name is itself a parody of the name of a toy gun by BoomCo, the "Rapid Madness".
Original size: 12pt (use multiples of this value for pixel perfection)
VERSION HISTORY:
09 Mar 2018 - v1.0 released.
10 Mar 2018 - v1.1 released.
13 Mar 2018 - v1.2 released. More Latin support added. The capital letters were cleaned up to make them nicer-looking when appearing in isolation. Excess spaces/lengths of line were reduced to make for denser-looking, more naturally handwritten words.
02 Apr 2018 - "More Latin" and "Google Fonts Basic" ranges finished. More shortening/optimization done for the extended Latin letters.
Version 2.6
*
Inspired by a comment by jonrgrover.
I built diamonds sized according to the Fibonacci series, then made a segmented display out of them. The design was then carved away to make the glyphs you see here. I used the members 1, 2, 3, 5, and 8. These sizes proved most feasible to work with in this sort of arrangement.
I gave the terminals a flared appearance which I think makes the glyphs look slightly Celtic. The design also makes me think of beach sand and things found on the beach - shells, pretty rocks, and so on.
I attempted a blackletter style without any knowledge or references. The result reminds me of a vampire's writing!
The name "Dethzmezenger / Death's Messenger" comes from one of many old joke bands which I created.
Original size: 17.25pt (use multiples of this value for pixel perfection)
A chimera (fusion) which combines inline-versus-outline, maze, Gemscript, and other techniques to produce a timeless look.
*
Original size: 6.75pt (use multiples of this value for pixel perfection)
Design Rules:
1. Square bricks only.
2. A 1px soft border of negative space must exist between lines whenever possible.
3. Glyphs must fill the 9x9 grid to the greatest extent possible given the rounded style.
4. The set of glyphs shall be a heterogeneous mix of symmetrical and asymmetrical forms.
5. Negative space will replace positive in any situation wherein the small grid size or the geometry of a letterform would be detrimental to the chosen style. This includes all situations where any shape lacks at least a soft 1px border of negative space around it.
See also: Terran Pixelcruiser
Pixel gothic somethingorother. Diabolical + Malicious = Diabolicious.
Original size: 5.25pt (use multiples of this value for pixel perfection)
Recommended: Use with kerning turned ON!
Experimental brush/pen thing. Has a slightly spooky look. Because of their tapering curves, many glyphs can render with a "split" or "stencil" look about them. This is due to software-imposed limitations on vector rendering. Designs which share this property can be considered Pseudostencils.
This design is not informed or inspired by any existing typographical traditions. I set out to make the "claw" bricks (as I call them) into a font and this is the result.
*
Version 1.3: Added Polish.
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.
SPOILER: I succeeded. :D
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
This is a cloneThis is another clone of Monkey (my monospace lanky font); it should be very similar to the original except for the lower x-height and the added accented characters (More Latin/Latin-1, Latin Extended A, Latin Extended B, and now Even More Latin/Latin Extended Additional). It is 16 blocks tall and 6 blocks wide; all letters without diacritics are at most 9 above the baseline and at most 3 below, but the accents push the height of a letter up by 3 blocks (or rarely 4), and the box drawing characters extend even higher, to 16 blocks from descender to the highest point. This font uses the FontStruct 2x2 filter method with plenty of composite and stacked bricks, which lets the curves look good at large sizes while remaining sharp on the screen at normal sizes. Mandrill will look strange in the FontStruct preview if you zoom in or out, but if you download it, it will look sharp at size 16 or 12 (depending on the program).
This is a clone of MonkeyLatin alphabet in an Ashrian style, mostly using a 2x3 grid, and using only stacked triangular bricks. Capital letters represent the full letterforms and lowercase letters represent the truncated letterforms used in Ashrian printing and computer systems.
Ashrians are the inhabitants of Planet Ashr in my RPG video game "Seven Candles". Their signmakers, carvers, and woodworkers used triangular gouges for millennia to make their letterforms.
VERSION HISTORY:
16 Mar 2018 - v1.0 released.
Version 1.5
*
Experimental slab-serif. The added height from the serifs is quantized so that the serifs, rather than the normal lines, determine a glyph's geometry.
It reminds me of the Wild West and the old cartoon "The Jetsons" at the same time. It uses two kinds of serifs: normal slabs and "hangover" serifs. The hangovers are the ones that look like overhangs. Is there another name for them? I don't know.
This font is set to appear in several games at once! I'm not the developer of any of them! WOO
Despite what you may have heard, a "hoedown" is just a party.
Experimental mosaic... or maybe a new mineral species?
This one started as a doodle. I began placing circles to see what kinds of complex shapes I could make, and this was the result.
It achieves a new visual effect at almost every size up to the original. Also try slowly moving the zoom slider for some interesting animations!
*
This font is now nearly 1MB in size! I guess it has to do with the intrinsic complexity of circles.
The Zephiest of designs - a gaggle of Roman columns with gongs stacked on them.
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
Font made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
An attempt to make an entire alphabet by modifying a single heptagon shape. (The "O" is the basis for almost all other glyphs.)
An alternate version of this was made in which I used different bricks to make the width of every line homogeneous. However, it was found that this robbed the font of much of its character. Additionally, the visual effect presented by the increased line width actually made the font less even-looking than it is now. This proved true with and without antialiasing.
The 5x5 pixel font used for the Virtual Gremlin, an old emulator/game I wrote. The standard font for ingame text.
This font was also designed to work well with IRC clients and ASCII games (see sample).
Breaking the 5x5 grid was unfortunate but necessary in order to make legible characters in non-Latin languages.
Marengi Serif. It's like Marengi, but with serifs!
The serifs give this a wider, more open/airy feeling. Slightly less readable than original Marengi, but slightly more pleasing to look at.
------------------------------------------------------------------
MIV: 7.85
Original size: 11pt (use multiples of this value for pixel perfection)
------------------------------------------------------------------
This is a clone of MarengiA semi-bold Diabolicious. It is the same width and size as the original!
Original size: 5.25pt (use multiples of this value for pixel perfection)
Recommended: Use with kerning turned ON!
This is a clone of DiaboliciousPixellated Proxima Punch. It's art deco for your ancient compy box! New smaller grid, same great taste.
Original size: 6pt. Use multiples of this value for pixel perfection. However, this one has been noted to look great at almost every smaller size. Try 7pt, 8pt, 9pt, etc. for slight variations on the look!
A medium-res pixel font I designed in 2017 for printing the text of "The Story of Book" (TSoB), a tale which began life as an imaginary joke story and then was actually committed to paper.
TSoB is woven from my and my friends' whims, flights of fancy, in-jokes, and intentional idiocy, as well as contributions from several AIs. The resulting story changes tone, style, mood, and context at seeming random, and is subversive toward its media and reader beyond insufferability. All this was done just to make Trap Farmer Brer Brah slightly more interesting to the very few people who will ever bother to get and read The Story of Book in-game. So this font is based on an Easter egg.
Experimental cyberpunk robot mosaic thing.
It gives me a strong "system font" feeling and seems like something that might be included with the OS of some futuristic tech deck. If the Fairlight Excalibur from Shadowrun Returns had its own font, this could be it!
*
Original size: 21pt (use multiples of this size for pixel perfection)
Original size: 15pt
*
A font which has a spurless, sans-serif, pixelated polygonal look which is somewhat reminescent of fonts used in VHS technology.
A lot of applied science went into this design. It's designed to remain legible on all media in all use conditions, provided that one uses the original size or a multiple thereof. Numerous technologies and mediums were employed to realize this objective.
"Diaspora" was tested and refined for use with/on/against:
• CRT, LCD & e-Ink screens
• image formats & compressed imagery (GIF, JPG)
• printers (inkjet, bubble jet, laserjet, & thermal)
• analog video & multi-generational copies (VHS, Super 8)
• digital video (AVI, MP4, MPEG, WEBM, WMV)
• 3D and voxel models (Blender, MagicaVoxel, POV-Ray)
• dynamic scaling hardware (game consoles and capture devices)
• imagery plugins & filters, including image degraders
• image scaling/interpolation hardware & software
• image recognition hardware & software
These all have traits which degrade, distort, compress, glitch, or otherwise alter imagery in various ways. This design aims to minimize the loss of legibility from these effects and to attain the best scores possible in various forms of imagery analysis. So far, this has proved extremely useful, as it can remain fully legible even when extreme JPG or video compression are applied to it thousands of times.
A piece of software I helped write, called the Marinan Imagery Deconstruction AI System (MIDAS), is being used on captured images of this font. The end objective is to realize the design which has the best all-around Marinan Interpretability Value (MIV) for all the tested platforms - the design which is considered by MIDAS to be the most legible in the most media under the broadest range of use conditions and quality levels.
MIDAS uses a set of considerations made with both humans and computers in mind, so a high MIV does not necessarily equal a better font - it just means one that the system thinks is easier to visually interpret. Note the use of the phrase "visually interpret" as opposed to "read". MIDAS tries to determine how well people and computers can tell what shapes are, not how much enjoyment they'll get from reading or how much strain they might undergo while doing it.
*
VERSION HISTORY:
1.0.0 - initial release.
1.0.1 - More Latin support added.
1.0.2 - First batch of tests run.
1.0.3 - gjy5&ßẞ were improved, some glyphs added.
1.0.4 - Second batch of tests run. Space width reduced.
1.0.5 - Experimentally converted to a rounded spurless design, then converted back to a plain spurless after testing. A few new ligatures were added.
1.0.6 - Cyrillic and Greek enter development. Many of these letters must be altered to be distinct from their Latin counterparts.
1.0.7 - Some spacing values changed to increase internal consistency. More difficult tests are being devised. However, since only I seem interested in this type of work, this project is going on hiatus for some time.
*
See also: AMFA, a font built with similar considerations in mind
A dashed line design made with the new half-arc bricks. The emphasized spurs/stems and off-kilter geometry give it a quirky, almost handwritten quality. Its striped appearance makes me think of candy as well as the Cheshire Cat, thus the name. :D
I doubt the upper case would look as cute as the lower. So I've cloned all LC to UC to make this easier to use...
Version 1.6
An attempt to make a "classroom" font. It reminds me of a font style which was once commonly used on magnetic letters.
*
See also: Hydrangea Unicase
An experiment in subtle asymmetry (it's most evident in the upper case).
*
Version 1.7 (14Sep2018) - ExtL-A added, GFB completed, Greek started
Version 1.6 (18Aug2018) - Changed name from "RC Badwolf" to "Badwolf"
Version 1.5 (15Aug2018) - altered 2357,ð
Version 1.4 (14Aug2018) - altered space width and mw
*
See also:Navajo Deco
Iterated version of an unreleased design called "Midnight Oil". It's also slightly related to Dethzmezenger and Gehenna.
I went against a few of my own conventions for this one. The close spacing might look a bit strange at times, but it eliminates the need for kerning while also creating a unique look. The overlapping spurs make me think of thorny plants!
This is an original design, but it does make me think of Planescape: Torment when I look at it, thus the name!
An ornate Goud with lots o' thorns! Now with MORE THORNS.
This is a clone of GoudMade on a whim as a result of rediscovering an old design (see sample).
It's pixel perfect at 12pt, 24pt, 36pt, etc. :^)
Since the inspiration image had only uppercase in it, I took some style liberties with the lowercase. The result is mildly comical!
My attempt at a headliner font. This is made to look very regular, even "generic", but also very clearly readable - the sort of font you might expect to see in advertising agencies, publishing houses, hospitals, and government buildings.
Uppercase only.
Use with kerning turned ON!
Another of my many doodles. Fun to make!
Finally, a design where all the diacritics blend in and look natural!
Rather than serve an ornamental or decorative purpose, this one is made to be as clean as possible so that it works well for body text. It's highly legible at small size, so it could potentially even be a programmer's font!
"Goud" stands for "Garden of Unearthly Delights", the name of an album from the band Cathedral.
Version 1.4
*
A variant of Kitchen Sink Rounded with filter sizes altered so that most letters are enclosed within golden rectangles. This is a squatter and friendlier take on the design - good for header text.
UC cloned to LC to make this easier to use...
This is a clone of Kitchen Sink Rounded