THE MOMENT YOU STEP INTO SPOOK MANSION, YOU REALIZE YOU DONE GOOFED UP. THE DOOR SLAMS SHUT BEHIND YOU AS SCARY PIANO MUSIC BEGINS TO WASH OVER YOU AND TERRIFYING KICK DRUM SOUNDS BEGIN TO PUMMEL YOU. WITHIN MOMENTS, YOU ARE DROWNING IN A SEA OF EERIE AMBIENCE. "WOE BETIDE THE FOOL WHO CONSPIRES TO TAKE MY RICHES!", SHOUTS A GHOSTLY VOICE SOMEWHERE BEHIND YOU. YOU TURN, BUT NOTHING'S THERE. BOO! LOL....................................................
Some kind of great big ol' chain.
In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!
When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)
*
12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.
*
Design Rules:
1. Negative spaces will be areas of 0.5 bricks' effective length or width.
2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.
3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.
Version 1.1 - Added Polish.
*
A font for times when Immersive Mode is turned off. This is used for documents and signage within the Euphedoran Extradimensional Research Institute situated in Euphedora, Greater Azwelkeland, Planet Ashr within ESOSVM.
EERI is known for Fengmiao Fukota, Salva Dheen and Triste Marinan, three of ESOSVM's most-learned and chronologically oldest AI characters. The lattermost of these is often consulted (through a software called MIDAS) for analysis which I use to improve the readability of certain fonts.
My attempt at making a Unown font where all the letters are consistent in size. This is original pixel art made using a high-res reference. It's made to be a nice-looking design, not to be 100% accurate to the games. Upper case is fully kerned.
"We Dunno" is an anagram for "Unowned".
Original size: 6.75pt (use multiples of this value for pixel perfection)
Recommended: Use with kerning turned ON!
Another brickswap of Marengi. This one will be programmed into actual marquee displays, some physical and some software-based. If only the glow of the LEDs could be simulated with bricks!
Original size: 11pt (use multiples of this value for pixel perfection)
This is a clone of MarengiA cipher/code used by the Kibble Cabal, a mostly animal-based team of misfits and food thieves in the game Trap Farmer Brer Brah. This code is very similar in application to the "Hobo Code" from the United States in the late 1800s. It makes a pretty good cipher, as well!
Original size: 8pt (use multiples of this value for pixel perfection)
The 5x5 pixel font used for the Virtual Gremlin, an old emulator/game I wrote. The standard font for ingame text.
This font was also designed to work well with IRC clients and ASCII games (see sample).
Breaking the 5x5 grid was unfortunate but necessary in order to make legible characters in non-Latin languages.
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
A double-line style with a twist. Named for the Exage Viral Armada (EVA), a mutagenic virus featured in several of my own games and stories. EVA causes rapid limb bifurcation and the spontaneous generation of butterflies, both of which can be seen in various glyphs from this design.
The exact rules for this are somewhat complicated, and based on structural as well as visual analysis. The basic idea can be seen on glyphs like k and x: Closed loops (double line) are joined by single lines which turn back on themselves to create the illusion of more lines. Of course, this idea had to be modified for most of the other glyphs, for the sake of stylistic consistency and visual interest. Particularly, almost all the spurred glyphs have the double-line structures open up to form the spurs.
This is a clonePixel prototype of a font for an upcoming game being developed by yours truly. This will likely be used, but only for flashbacks and dreams. The normal ingame font may be a high-res version of this, or something different - tests are still being done to determine this.
English only for now, as there are no plans to localize the game myself.
"Madufaros" = "daughter of Madu".
*
Original size: 9pt (use multiples of this size for pixel perfect rendering)
3x3 cipher, based on version 0.3 of "Micromaze". It uses its own form of binary notation for the numerals, wherein the upper-right 4 pixels play the role of the 1, 2, 4, and 8.
This is the smallest font in which I was able to give a unique symbol to every glyph (excluding the lower/upper case, which look the same). It reads sort of like Pigpen Cipher, but is more densely written.
Since MMC is obscure and of constant width/height, it serves many "gibberish" and "placeholder text" purposes in addition to being a modestly strong cipher.
Original size: 2pt (use multiples of this value for pixel perfection)
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
Going for an industrial sci-fi look. The hard angles give these letters the appearance of being made by some kind of tape or roller.
This font was originally designed to be uppercase only. So, the lowercase might be considered as an alternate set.
Original size: 24pt (24pt, 48pt, etc. look most crisp when not using antialiasing)
A hexagon shape, a forced perspective effect, and a typeface all had their DNA extracted and recombined by evil scientists at Salk Institute. "Chimera Scales" is a hexagonal blackletter and the culmination of 8 years of genomic research. It has the ability to look like itself no matter what environment it's in. ALSO IT EATS HUMAN SOULS.
A semibold Gongclonker made to the same specs as the original - 5x5 with no wasted matrix.
This is a clone of GongclonkerA highly exclusive language used by people on Bysonce Island, Planet Ashr in my video game Endless Sea of Stars. This one is used for private documents and old government records, and its brother language Eudastiphos Hand is used for public court documents.
*
Calystiphos Hand is much simpler than its brother language, despite looking much more complicated. Each glyph refers to highly specific concepts and so it is most used to record time-tested, factual information rather than stories or fiction. However, these glyphs can still be considered as runes, as each one is host to whole mysteriums of information and idiomatic knowledge which have been associated with it.
Bysoncians use a base-8 system of numeracy. 9 would thus be written as 81, 10 as 82, etc. There is no numeral 9.
*
Calystiphos is the Ashrian god of siroccos. The simplest way to put it is to say that he represents the "yin" of the pantheon.
First attempt at a cursive pixel font. The name derives from an old joke band, whose name is itself a parody of the name of a toy gun by BoomCo, the "Rapid Madness".
Original size: 12pt (use multiples of this value for pixel perfection)
VERSION HISTORY:
09 Mar 2018 - v1.0 released.
10 Mar 2018 - v1.1 released.
13 Mar 2018 - v1.2 released. More Latin support added. The capital letters were cleaned up to make them nicer-looking when appearing in isolation. Excess spaces/lengths of line were reduced to make for denser-looking, more naturally handwritten words.
02 Apr 2018 - "More Latin" and "Google Fonts Basic" ranges finished. More shortening/optimization done for the extended Latin letters.
Another experimental font for texturing work. This one uses only an 8x8 grid, but since it isn't pixel art, a much greater variety of patterns is possible. Every glyph in the font repeats as a seamless texture in both directions.
See also:Gremlin Skins (pixel version)
Version 1.3: Added Polish.
*
This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.
"Nervousa" is an anagram for "Ravenous".
A monospaced version of Barcade Brawl that has been modified to work well as a roguelike font. Not every glyph is centered yet, but all the Basic Latin and More Latin ones are.
A few glyphs (such as #) are modified to break the matrix so that they link together. This is because these glyphs are used to form continuous walls and other structures.
Note also that this design uses a 7x7px matrix which is monospaced at 8px to create 8x7 tiles. I have placed a stray pixel on an unused glyph to make 1px of extra line spacing occur so that the final tiles are 8x8. The preview here onsite adds another px, so it looks slightly out of square. The sample below does too, because it was made before this fix was implemented.
I was working on another spinoff of this that was high-resolution rather than pixel, but since this font has the same LC and UC, I might transplant those glyphs to this font as well to make it as multifunctional as possible. That will more than double the work of making an already big font, though, so it will depend on whether this font gets used by others. A few game developers already use the original "Barcade Brawl" so there is a possibility...
*
Original size: 5.25pt (use multiples of this size for pixel perfection)
This is a clone of Barcade BrawlI attempted a blackletter style without any knowledge or references. The result reminds me of a vampire's writing!
The name "Dethzmezenger / Death's Messenger" comes from one of many old joke bands which I created.
Original size: 17.25pt (use multiples of this value for pixel perfection)
A vertical take on Morse code. These glyphs are read left-to-right from the bottom up and spaced so that 1 pixel = 1 unit of time, whether moving horizontally or vertically. Letters have 3 spaces between them and words have 7 spaces.
The result is a concise design that can easily be fed to tone-generation or image-to-audio software (e.g., AudioPaint) to produce accurately encoded & timed Morse code, no matter the frequency (speed) of the transmission. You can use this principle to create and place messages into music or games, make messages match a tempo or beat, arpeggiate words and turn them into music or sound effects, and much more.
The name is a pun. :P
*
21NOV2018: I've recently learned that many radio stations use an expanded version of the International Morse Code, adding many symbols and punctuation to it. Though these new glyphs are not part of the standard, they are commonly used and agreed on, so I will keep adding them as I find them.
*
Original size: 4pt (use multiples of this size for pixel perfection)