Fontstructing since | 3rd February, 2018 |
Fontstructions | 718 shared, 35 staff picks |
Shared Glyphs | 92942 |
Downloads | 18605 downloads made of this designer’s work |
Comments Made | 1585 |
A double-line style with a twist. Named for the Exage Viral Armada (EVA), a mutagenic virus featured in several of my own games and stories. EVA causes rapid limb bifurcation and the spontaneous generation of butterflies, both of which can be seen in various glyphs from this design.
The exact rules for this are somewhat complicated, and based on structural as well as visual analysis. The basic idea can be seen on glyphs like k and x: Closed loops (double line) are joined by single lines which turn back on themselves to create the illusion of more lines. Of course, this idea had to be modified for most of the other glyphs, for the sake of stylistic consistency and visual interest. Particularly, almost all the spurred glyphs have the double-line structures open up to form the spurs.
This is a clonePixel prototype of a font for an upcoming game being developed by yours truly. This will likely be used, but only for flashbacks and dreams. The normal ingame font may be a high-res version of this, or something different - tests are still being done to determine this.
English only for now, as there are no plans to localize the game myself.
"Madufaros" = "daughter of Madu".
*
Original size: 9pt (use multiples of this size for pixel perfect rendering)
Version 1.1 - Added Polish.
*
A font for times when Immersive Mode is turned off. This is used for documents and signage within the Euphedoran Extradimensional Research Institute situated in Euphedora, Greater Azwelkeland, Planet Ashr within ESOSVM.
EERI is known for Fengmiao Fukota, Salva Dheen and Triste Marinan, three of ESOSVM's most-learned and chronologically oldest AI characters. The lattermost of these is often consulted (through a software called MIDAS) for analysis which I use to improve the readability of certain fonts.
Small-grid doodle which creates new combinatorial forms.
I considered this design rather rough and unappealing until I gave it negative spacing. This caused the forms to merge together in unpredictable and interesting ways. The lesson here is that sometimes the metrics, not the aesthetics, are what "make" or "save" a design.
THE MOMENT YOU STEP INTO SPOOK MANSION, YOU REALIZE YOU DONE GOOFED UP. THE DOOR SLAMS SHUT BEHIND YOU AS SCARY PIANO MUSIC BEGINS TO WASH OVER YOU AND TERRIFYING KICK DRUM SOUNDS BEGIN TO PUMMEL YOU. WITHIN MOMENTS, YOU ARE DROWNING IN A SEA OF EERIE AMBIENCE. "WOE BETIDE THE FOOL WHO CONSPIRES TO TAKE MY RICHES!", SHOUTS A GHOSTLY VOICE SOMEWHERE BEHIND YOU. YOU TURN, BUT NOTHING'S THERE. BOO! LOL....................................................
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
This is an unofficial forum I have made for FontStruct tutorials and educational materials. Want to know how to do something, or how to make a certain style or effect? This is the place to ask. I am not part of staff, and am far from being the most advanced user on here, but will pass on whatever I can.
I have been writing an FS video series for some time, but it has proven very time-consuming to make the series as comprehensive (and as high-quality) as I would like. It has also occurred to me that I can teach a lot through simple text and graphics. This is my attempt to create a knowledge hub for FS where all the good stuff is in one place. If you make a tutorial or expand on mine in some way, you're welcome to post those here as well.
Please keep the discussion topical. This page is about tutorials, requests and discussions for them, etc. Idea Soup is more of a free-for-all and anything FS-related is accepted there. Idea Soup is also a good place to discuss tutorial ideas, since we can work out exactly what needs to be taught there without clogging the comment section here. (There is a limit on the number of comments this page can have, right?)
This page is open to users of all languages, but we may have to use Google Translate to answer you. Sorry in advance for any bad translations :D
*
Related Forum:FontStruct Idea Soup
The font used for these forums is Tangereen 2.
An experimental design using 1/8 weight lines alongside 1/16 ones. The 1/8 lines are the smallest that can be accurately nudged. Centering them is still a problem at times, and I need a few impossible composites to perfect the glyphs ABEFHKQRXYijkx34789, but overall I'm quite fond of how this doodle turned out.
I think I could use some intensive compositing to get rid of the central dividing line in glyphs like A and H. I'll give it a try when I can.
I decided to make a design which incorporated the thinnest/lightest weight lines possible in FontStruct. This is the result; I'll add more if people like it.
These 1/32 lines cannot be accurately nudged, so a unique line has to be built for each vertical position where I want a line. These lines also cannot be centered on a place where two curves meet (such as the middle of B or R). This introduces some unintentional asymmetry to the design, but I like it, so I'll keep it.
There is also the problem that forming a diagonal line of the same line weight is nearly impossible. While angled 1/32 lines can be formed, their angles are all close to 0. No method exists for making a line which slants at 45 degrees while also being 1/32 weight. So, I had to make some thicker lines in certain areas. I don't think they detract from the design, but if you scrutinize this enough, you'll notice them.
A pixel art galaxy. 27*27 canvasses.
There are 12 distinct fonts lurking within this one. Spot 'em all and win a FREE Nothing!
Original size: 20.25pt (use multiples of this size for pixel perfection)
*
-= LEGEND =-
A - Space Shuttle, B - Planetoids, C - Alien, D - Space Station, E - Pulsars, F - Satellite/Telescope, G - Planet & Moons, H - Kempler Rosette, I - Bar Sign, J - Space Bar, K - Interstellar Planet/Dark Star, L - Double Sun Planet, M - Globular Cluster, N - Earth, O - Galactic Plane, P - Asteroids, Q - Alien in Saucer, R - Black Hole/Wormhole, S - Globular Cluster, T - Dyson Ring, U - Giant Star, V - FS Nebula, W - Nyan Cat, X - Starship Enterprise, Y - Star-Forming Region, Z - Planet & Rings
a - Space Armada, b - Dr. Wily, c - New Stars, d - Binary Star System, e - Colliding Galaxies, f - Space Pirates & Mothership, g - SpaceX Roadster, h - Colliding Planets, i - Space Drone/Probe, j - Colony Ships, k - Ringworld, l - Halfmoon/Destroyed Planet, m - Uninhabitable Planet, n - Solar Wind, o - Wrecked Spaceplane, p - Escape Pods, q - 'Oumuamua, r - Moon, s - Molecular Clouds, t - Navigational Buoy, u - Marx, v - Substellar Companions, w - M57 (Ring Nebula), x - Space Lodge, y - White Dwarves, z - Death Star
0 - Big Star, 1 - New Spiral Galaxy, 2 - Old Spiral Galaxy, 3 - Supernova, 4 - Exploded Star & Nebula, 5 - Planet X, 6 - Quasar, 7 - Cruiser, 8 - Hypernova, 9 - Gas Giant
+= - Space Hotdogs & Food Sign, / - Planet & Comets, ; - Gamma-Ray Burst, : - High-Tech Planet, ' - Dense-Atmosphere Planet, " - Space City, £ - TARDIS, € - Sinistar
.,?!@#$%^&*()-_{space}{nbsp} - Starfields & Map Markers
*
I add new art to this whenever I get more ideas. But I don't want the legend to be any longer than it is, so I leave the others for you to discover on your own.
A pixel font which combines four experimental techniques at once:
1. Structurally disconnecting the stems from the open parts of letters.
2. Allowing glyphs to extend beyond the reaches of width and starting position.
3. Designing glyphs specifically to connect and form new shapes, rather than simply allowing shapes to emerge from existing characteristics.
4. Designing glyphs so that the overall font is free of a need for kerning.
*
Alternates are now on UPPER CASE. I'll continue to update this as I get more ideas!
*
Original size: 6.75pt (use multiples of this value for pixel perfection)
Version 1.3: Added Polish.
*
This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.
"Nervousa" is an anagram for "Ravenous".
A variant of Marrada with more angles.
Usually with designs I try to make every part look like it "belongs" with the others as opposed to trying to make each part look its best. With Marrada, I struck a balance between the two. Q1@*&{} are probably the best examples of this sort of balance...
This is a clone of MarradaVersion 1.3: Added Polish.
*
Another asymmetrical sans-serif made for use in rulebooks for the Freeform Limitless Adventure Kit (FLAK) pen-and-paper game system. This one is classed as a hybrid and works well at all point sizes!
It began as a Constant Height design, but now I don't classify it as such since most of the letters with diacritics are taller than those without. A few letters (eszett, thorn, eta, etc.) are allowed to descend slightly, as well.
This font has also found some use on signage at a friend's bistro!
A more bookish take on Comicool, made for more comfortable general reading. It's still useful for comics, as well!
Many letters were squared off in the corners, lowercase letters were given stems, and an assortment of glyphs were edited for more style.
This is the third iteration of Comicool... rather than develop them all toward one style, I tried to make each iteration the best it could be. The result is three distinct, but still compatible styles. This one is probably the best for body text!
This is a clone of ComicoolA semibold Gongclonker made to the same specs as the original - 5x5 with no wasted matrix.
This is a clone of GongclonkerSome kind of great big ol' chain.
In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!
When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)
*
12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.
*
Design Rules:
1. Negative spaces will be areas of 0.5 bricks' effective length or width.
2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.
3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.
Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.
This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!
This is a clone of NirvaniteExperimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
Font made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
A 117-segment display made to have a more "mosaic" look. Try using this one at odd sizes, especially with antialiasing off! The resulting distortions occur in a consistent way which leads to many new uses for the font.
Original size: 38pt
A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!
"Absinthelyric Print" is an anagram for "Labyrinthine Script".
*
Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)
*
Design rules:
1. Square bricks and 90-degree angles only.
2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.
3. Glyphs must fill the 15x15 grid.
4. Ligatures and combinatorial glyphs must fit into one letter's space.
5. Draw from the outside in.