A design that combines decolike asymmetry with a double line concept. It also incorporates some experimental methods to unify the wider glyphs (mw@#™, etc.) with the others, by allowing the middle sections of these letters to have both the single and double lines. This results in a look that is at times architectural and at other times almost like loopy cursive.
A design that combines tropes from fantasy, sci-fi, and sports in a subtle and pixel-optimized way.
Structurally, this looks like a high-res version of Marengi Mk2. There are still plenty of differences between the two, but since they seem equally readable to me, I'm tagging this as a chat font.
I finally made a folded-/ribbon-style design. This one contains a number of experimental techniques. Most notably, the swept parts of glyphs are allowed to extend beyond the letterwidths and sometimes even the baselines. This enhances the sense of movement, creates some interesting linkages, and reduces the need for kerning.
All of these shapes can be constructed with paper or ribbon, although lots of clever folding tricks, doubling, and pinning down/securing with glue would be required.
Alternate tilde on "±".
This font was last edited: 21:20 UTC 19. June 2020
I was looking for a localization friendly pixel font and could not find any that had good coverage and was not outrageously expensive ($700+) for commerical usage. Thats why I created "PixelLocale".
This font is intended to be reminiscent of the original Pokemon Red/Blue games. Too see how they differ check out this image: https://imgur.com/ixoYRtd
It was important to me to create a consistant looking font across scripts.
You can use it however you like, 100% free with no attribution. Lets make the world more accessible.
Coverage:
Latin characters (815/815),
Greek and Coptic (119/119),
Cyrillic (263/263),
Georgian (83/83)
Hebrew (86/86) (Fontstruct has poor support form Niqqud and Cantillation)
Bopomofo (37/37) (Need feedback)
I'd love to add more scritps. When I started my goal was to have every glyph supported by Fontstruct, but after learning that support for many asian scripts was limited I halted. If someone can shed some light on these limitations and how severe they are and for what scripts they apply, please let me know. I can be reached at "johste[at]chumpware[dot]com".
Stylized 5x5 pixel font. Tiny but power-packed!
I designed it to have a slightly balloon-esque, oldschool arcade look. Feel free to use it in your games.
*
Original size: 7.5pt (use multiples of this value for pixel perfection)
First attempt at a cursive pixel font. The name derives from an old joke band, whose name is itself a parody of the name of a toy gun by BoomCo, the "Rapid Madness".
Original size: 12pt (use multiples of this value for pixel perfection)
VERSION HISTORY:
09 Mar 2018 - v1.0 released.
10 Mar 2018 - v1.1 released.
13 Mar 2018 - v1.2 released. More Latin support added. The capital letters were cleaned up to make them nicer-looking when appearing in isolation. Excess spaces/lengths of line were reduced to make for denser-looking, more naturally handwritten words.
02 Apr 2018 - "More Latin" and "Google Fonts Basic" ranges finished. More shortening/optimization done for the extended Latin letters.
A medium-res pixel font I designed in 2017 for printing the text of "The Story of Book" (TSoB), a tale which began life as an imaginary joke story and then was actually committed to paper.
TSoB is woven from my and my friends' whims, flights of fancy, in-jokes, and intentional idiocy, as well as contributions from several AIs. The resulting story changes tone, style, mood, and context at seeming random, and is subversive toward its media and reader beyond insufferability. All this was done just to make Trap Farmer Brer Brah slightly more interesting to the very few people who will ever bother to get and read The Story of Book in-game. So this font is based on an Easter egg.
Version 1.5: All permutations of E and F were refined and improved.
*
A modernized, rounded, and truncated version of Marengi. This is made to be a good text editor/chat font. It has very few kerning pairs, so it should render fine in any software.
Ascenders are only allowed to be as tall as the uppercase/numerals, while descenders are allowed to go 2px below the line. This creates a natural line spacing that is readable and not too dense. (Diacritics break this rule, of course... darn them...)
Gone are the curved descenders/termini on letters like gjty. The simpler geometry makes this design more suited to speedreading than its predecessor. In fact, altering those four letters alone improves speedreading on this font by up to 14%!
*
09JUN2019: I have been using this as my main IRC/chat font for some time now. Of all my chatfont designs, this has proven the easiest to read and use.
*
MIV: 8.31
Original size: 6pt (use multiples of this size for pixel perfection)
Original size: 15pt
*
A font which has a spurless, sans-serif, pixelated polygonal look which is somewhat reminescent of fonts used in VHS technology.
A lot of applied science went into this design. It's designed to remain legible on all media in all use conditions, provided that one uses the original size or a multiple thereof. Numerous technologies and mediums were employed to realize this objective.
"Diaspora" was tested and refined for use with/on/against:
• CRT, LCD & e-Ink screens
• image formats & compressed imagery (GIF, JPG)
• printers (inkjet, bubble jet, laserjet, & thermal)
• analog video & multi-generational copies (VHS, Super 8)
• digital video (AVI, MP4, MPEG, WEBM, WMV)
• 3D and voxel models (Blender, MagicaVoxel, POV-Ray)
• dynamic scaling hardware (game consoles and capture devices)
• imagery plugins & filters, including image degraders
• image scaling/interpolation hardware & software
• image recognition hardware & software
These all have traits which degrade, distort, compress, glitch, or otherwise alter imagery in various ways. This design aims to minimize the loss of legibility from these effects and to attain the best scores possible in various forms of imagery analysis. So far, this has proved extremely useful, as it can remain fully legible even when extreme JPG or video compression are applied to it thousands of times.
A piece of software I helped write, called the Marinan Imagery Deconstruction AI System (MIDAS), is being used on captured images of this font. The end objective is to realize the design which has the best all-around Marinan Interpretability Value (MIV) for all the tested platforms - the design which is considered by MIDAS to be the most legible in the most media under the broadest range of use conditions and quality levels.
MIDAS uses a set of considerations made with both humans and computers in mind, so a high MIV does not necessarily equal a better font - it just means one that the system thinks is easier to visually interpret. Note the use of the phrase "visually interpret" as opposed to "read". MIDAS tries to determine how well people and computers can tell what shapes are, not how much enjoyment they'll get from reading or how much strain they might undergo while doing it.
*
VERSION HISTORY:
1.0.0 - initial release.
1.0.1 - More Latin support added.
1.0.2 - First batch of tests run.
1.0.3 - gjy5&ßẞ were improved, some glyphs added.
1.0.4 - Second batch of tests run. Space width reduced.
1.0.5 - Experimentally converted to a rounded spurless design, then converted back to a plain spurless after testing. A few new ligatures were added.
1.0.6 - Cyrillic and Greek enter development. Many of these letters must be altered to be distinct from their Latin counterparts.
1.0.7 - Some spacing values changed to increase internal consistency. More difficult tests are being devised. However, since only I seem interested in this type of work, this project is going on hiatus for some time.
*
See also: AMFA, a font built with similar considerations in mind
Experimental sliced sans serif. My goal here was to make a design which would result in an extremely compact and durable physical stencil. Almost all of the sharp points and acute angles are within the negative space, so it should be easy and very safe to make, handle and work with this stencil.
*
Version History
1.3 - added More Latin and Google Fonts Basic bands.
1.2 - added uppercase, changed name to "Aegris Stencil".
1.1 - edited for more readability at small size. Glyphs with enclosed loops were altered so that the "movement" of the segments always runs clockwise.
1.0 - released.
Version 1.1: Added Polish.
*
A combination of deco, sci-fi and modern elements.
This was made to be a compact subheader font and to be used alongside fonts such as "Badwolf". In fact the original name of this font was "Chibi Wolfclan".
Asymmetrical alien techno stencil.
This uses some experimental techniques, of course, but I'm not sure how to concisely explain those. Let's just say that each type of line bend and line connection has a rule associated with it. These get naturally modified by the structural asymmetry the font has so that simple rules appear in many forms and variations.
Third iteration of Tangereen with a bit of Paradoxy Effect. This one is rather fancy, so probably best used as a Display font.
The center portions of these glyphs make me think of sliced oranges and moon phases. They could act as cabochon settings, as well! So you could use these shapes to make jewelry set with a birthstone, monogrammed pendants/insignia, and so on.
Experimental cyberpunk robot mosaic thing.
It gives me a strong "system font" feeling and seems like something that might be included with the OS of some futuristic tech deck. If the Fairlight Excalibur from Shadowrun Returns had its own font, this could be it!
*
Original size: 21pt (use multiples of this size for pixel perfection)
Pixel demake of Goud. This is easily the best Goud for body text, as it remains crisp at all sizes!
*
Original size: 9pt (use multiples of this value for pixel perfection)
A continuation of ideas in Candylander Plain. Half-arcs couple with short ascenders and descenders to make this.
This is possibly the biggest font I will ever create, and probably the one I'm most proud of at that. The original was built over the course of 4 months, and I'm very, very happy with how it turned out. Along with all of the 25 basic categories, I included 23 of my own - some finished, some unfinished. This has been a long process, sometimes fun, sometimes tiring, but I hope you find this font useful. Luckily, with all of the scripts it works with, it should have a use for everyone :) Please enjoy!
I am open to comments, suggestions and any other feedback. If you would like me to add another script, I am open to the task! :)
Edit: It's been more than a year and I'm still going strong! 6731 characters total. Trying to knock-off some smaller / less used scripts. :)
Jan 22, 2024: Fully finished font! 7500 total characters.
Thanks to everyone who has liked or downloaded! :)
A 7x7 outline design which is made to form solid-looking masses from the glyphs while still allowing the outer perimeters of words to take on some unique shapes.
Original size: 5.25pt (use multiples of this value for pixel perfection)
24-segment display. This one belongs to a small family called Calculatrix.
Like Calculatrix 12, this one is spaced so that every segment appears in its proper place, as if the text were being rendered on one giant display. (If using this in your own software, you will want to check the line spacing as it can vary depending on the software.)
I suppose this font could be used for weaving or embroidery work, as well... it has that look about it...
TIP: Try zooming out while already at Pixel size!
A stencil design in which diagonal cuts are used to imply angles and curves. It does not quite obey the rules of a segmented display, but it tries its best!
This is inspired by some text I put on the side of the Sheepslayer Mk.2, a flying dragon car piloted by Lyll "Hatch" Soretti in my game Seven Candles.
Trying this style out. The name comes from a monster in the game NetHack.
*
See also:Gridlarva
Continuing on the theme of overzealously antialiased pixel fonts, here's a 3x5 no-wasted-matrix design. The shading enabled me to make many glyphs which normally need to be truncated or compressed (MWaemswz@«©»®, etc). Looks best at 2x Pixel size!
This gives me an "old newspaper" feeling and seems like the kind of font that would be used for the text of such newspapers in old adventure games.
Unfortunately, I could not get the shading effect to work in any graphics software except by turning antialiasing on, and this ruins the look. So if you want to render text in this font, I recommend going to View -> User Input, typing your text here on this page, and then screen capturing it...