A stencil design in which diagonal cuts are used to imply angles and curves. It does not quite obey the rules of a segmented display, but it tries its best!
This is inspired by some text I put on the side of the Sheepslayer Mk.2, a flying dragon car piloted by Lyll "Hatch" Soretti in my game Seven Candles.
An inverted alternate version of Spiderling that's glitch-free... for now, at least!
I think this doesn't look nearly as spider-like as the original... your mileage may vary...
Version 1.6
An attempt to make a "classroom" font. It reminds me of a font style which was once commonly used on magnetic letters.
*
See also: Hydrangea Unicase
A half-sized, filterless version of Comicool Unicase which also has square terminals.
This has lowercase, but is made for all-caps comic book style lettering, so consider the lowercase as something added for accessibility's sake...
A design that looks like a top-down view of ziggurats!
I composited the diacritics so they'd fit into place, but this means that most anything non-English needs to be pretty large to be unambiguously read...
Cybernaut turned inside-out! The result is mostly illegible except when used at multiples of the original size and with antialiasing turned off. At the original size (2x Pixel size), it's capable of some magnificent cybernetic aesthetics.
*
Original size: 21pt (use multiples of this size for pixel perfection)
This is a clone of CybernautStained-glass blackletter Frankenfont thing. :D
UC cloned to LC to make this easier to use...
This is a clone of Chimera SpineJust a stencil doodle. Seems like it would go well with the Kitchen Sink family.
This is built at roughly 3.5x5, but shrunk with filters to look squareish and to make the line spacing very small.
*
See also:Guillotine Blade
Experimental cyberpunk robot mosaic thing.
It gives me a strong "system font" feeling and seems like something that might be included with the OS of some futuristic tech deck. If the Fairlight Excalibur from Shadowrun Returns had its own font, this could be it!
*
Original size: 21pt (use multiples of this size for pixel perfection)
SPOOKY GHOST FONT. A work in progress. Getting the right spooky apparition look is pretty intensive, but I managed to finish the basic character set before Halloween. :D
*
This started as a 5x5 design. After realizing S and Z would look far better if I made them 1 square taller, I converted the whole font to be roughly 5x6. At this low resolution, it's hard to get the degree of irregularity which I think makes these letters look ghostly... but, the idea is certainly present!
This design seems like it'd fit in with a lot of horror and science fiction stuff, too. Apart from the "smoky"/"ghostly" look, it has a "melted" one which suggests a hot place or maybe immersion in acid. It also looks a bit like slime, and finally at smaller sizes it has a glitch-esque appearance.
The Zephiest of designs - a gaggle of Roman columns with gongs stacked on them.
Version 1.5
*
A font made in the proto-calligraphic style I invented and used when I was a teenager. I haven't owned a nibbed pen since those days, so this font is as far as the style was ever allowed to evolve. It's somewhat lacking the handwritten character my writing had, but this regularity is the result I was trying to achieve. I had no particular use in mind for the style other than titling documents. For that reason I consider this to be a Headliner.
"I" is kerned to itself so that it can be used to make nicer-looking Roman numerals.
*
See also:Basalt Pixel
A slightly chimeric sci-fi design with no relation to Space Blam, Space Clam, Space Cram, Space Dam, Space Fam, Space Flam, Space Gram, Space Ham, Space Jam, Space Kazaam, Space Ma'am, Space Pram, Space Ram, Space Sam, Space Slam, Space Spam, Space Tram, or Space Yam.
In making this I attempted to achieve a harmony between angles and curves. You can see it especially well on "B", "3", "8", and "&".
Experimental mosaic... or maybe a new mineral species?
This one started as a doodle. I began placing circles to see what kinds of complex shapes I could make, and this was the result.
It achieves a new visual effect at almost every size up to the original. Also try slowly moving the zoom slider for some interesting animations!
*
This font is now nearly 1MB in size! I guess it has to do with the intrinsic complexity of circles.
Version 1.1
*
A fusion of art deco- and Navajo-style design. Well, many civilizations used a square zigzag pattern such as this, but "Navajo" always comes first to mind when I look at this design.
*
See also: Badwolf
Another of my many doodles. Fun to make!
Finally, a design where all the diacritics blend in and look natural!
A doodle made with Brick Basket.
This has many uses! It works as a pixel font or a high-res one, and can generate a surprising range of visual effects.
*
See also:Psycho Wave
Version 2.6
*
Inspired by a comment by jonrgrover.
I built diamonds sized according to the Fibonacci series, then made a segmented display out of them. The design was then carved away to make the glyphs you see here. I used the members 1, 2, 3, 5, and 8. These sizes proved most feasible to work with in this sort of arrangement.
I gave the terminals a flared appearance which I think makes the glyphs look slightly Celtic. The design also makes me think of beach sand and things found on the beach - shells, pretty rocks, and so on.
For my 300th Fontstruction, a more open and airy deco style than those I usually make. It has a strong sense of the "negative space has been sliced out" look about it which I tend toward in an art deco design.
Even though this is legible at a small size, I consider it a display font since many of its details are subtle. In retrospect I think this looks slightly Broadway-ish... but, this was just my attempt at a 5x5 deco.
"Gongclonker" is my nickname because I am a gong player.
An experiment in subtle asymmetry (it's most evident in the upper case).
*
Version 1.7 (14Sep2018) - ExtL-A added, GFB completed, Greek started
Version 1.6 (18Aug2018) - Changed name from "RC Badwolf" to "Badwolf"
Version 1.5 (15Aug2018) - altered 2357,ð
Version 1.4 (14Aug2018) - altered space width and mw
*
See also:Navajo Deco
Military and wargame related icons. The 4 stars are meant to represent a player number. Erase the stars to make pieces for Players 1, 2, and 3.
Got a request or idea? Let me know. Feel free to use these in any games you're creating!
*
A - Tank
B - Anti-Aircraft Gun
C - Jet Fighter
D - Stealth Bomber
E - Battle/Explosion
F - Big Explosion/Nuclear Explosion
G - Missile Truck/Mobile Launcher
H - Flying Cross Medal - for distinguished aviators
I - Strategic Map
J - Military Convoy Truck
K - Bullets
L - Shells
M - Bombs
N - Strike Zone
O - Sm. Helicopter
P - Surface-to-Air Radar
Q - Surface-to-Surface Radar
R - Infantry Section
S - Civilians
T - ICBMs
U - Radar/Comms Coverage Area
V - APC
W - POWs
X - Opposing Forces
Y - Navy & Marine Corps Medal - for noncombat heroism
Z - Communications Satellite
a - Reconaissance Satellite
b - Weapon Satellite
c - Satellite Array
d - Patrol Boat
e - Frigate
f - Destroyer
g - Aircraft Carrier
h - Submarine
i - Mines
j - Depth Charges
k - Artillery
l - Artillery Division
m - Mechanized Infantry
n - AWACS/Early-Warning Aircraft
o - Fortifications
p - Trenches
q - Terrain (Road)
r - Terrain (Woodland)
s - Terrain (Mountain)
t - Terrain (Mountain Range)
u - Terrain (Calm Seas)
v - Terrain (Rough Seas)
w - Terrain (Desert/Sand)
x - Terrain (Wetlands/Mud)
y - Terrain (Hills)
z - Terrain (Lake/River)
. - Falling Bomb
, - Transport/Cargo Plane
0-9 - Stencil Numerals
*
See also: Donjonikons, Travelicons
10x10 fantasy- and RPG-related icons. The bigger they are, the better they look!
This is finished! I'm happy to hear out and possibly implement others' suggestions, though.
*
A - Knight's Blade
B - Warrior's Shield
C - Paladin's Helmet
D - Samurai's Armour
E - Wizard's Potion
F - Thief's Keys
G - Monk's Rosary
H - Dwarf's Pickaxe
I - Necromancer's Scroll
J - Sorceress' Staff
K - Shaman's Totem (Spider)
L - Ninja's Glove
M - Assassin's Bow
N - Cleric's Holy Symbol
O - Viking's Hammer
P - Bandit's Buckler
Q - Barbarian's Axe
R - Druid's Mandrake
S - Priest's Altar
T - Jester's Crowns
U - Warlock's Book of Shadows
V - Witch's Lantern
W - Dancer's Lei
X - Hypnotist's Charm
Y - Miner's Hat
Z - Explorer's Map
a - Trapper's Caltrops
b - Demolitionist's Arsenal
c - Vampire Hunter's Boomerang
d - Herbalist's Bag
e - Archaeologist's Fossil
f - Goblin's War Trumpet
g - Gourmand's Platter
h - Musician's Harp
i - Gladiator's Net
j - Oracle's Beads
k - Bard's Singing Sword
l - Spelunker's Rope
m - Merchant's Abacus
n - Gambler's Dice
o - Siege Operator's Catapult
p - Aztec's Warclub (Macuahuitl)
q - Drunken Master's Jug
r - Fighter's Headband
s - Judge's Gavel
t - Guru's Meditation Balls
u - Dungeoneer's Folding Ladder
v - Moneychanger's Scales
w - Cultist's Altar
x - Magician's Hat
y - Friar's Cross
z - Fisher's Harpoon
0 - Skeleton
1 - Kobold
2 - Goblin
3 - Bone Dragon
4 - Pumpkin Head
5 - Slime
6 - Vampire
7 - Imp
8 - Dragon
9 - Mimic
. - Chest
, - Pile of Loot
*
See also: Donjon16, Militaricons, Travelicons
Font made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
Version 1.5
*
Experimental slab-serif. The added height from the serifs is quantized so that the serifs, rather than the normal lines, determine a glyph's geometry.
It reminds me of the Wild West and the old cartoon "The Jetsons" at the same time. It uses two kinds of serifs: normal slabs and "hangover" serifs. The hangovers are the ones that look like overhangs. Is there another name for them? I don't know.
This font is set to appear in several games at once! I'm not the developer of any of them! WOO
Despite what you may have heard, a "hoedown" is just a party.