A project I've been planning on for a long while! This is my official first Unicode font!
UPDATE: Finished IPA.
v1.2. Partially complete support for Cyrillic, and Japanese. Also going for a similar Unicode private use map like other Unicode fonts like Nishiki-teki, Catrinity, and Fairfax Hax HD. [With just a few modifications.]
This font is 100% free, enjoy!
Looking for non-supported characters in your phone's current font? Try 9x5 Ultimate!
This font can actually make Greek and Cyrillic sentences! And since it has letters with diacritics, you can even make German sentences too! The sky is the limit.
This will be my largest font yet. Maybe at the end of 2025, I'll finish the whole font. (Making the font 65536 characters long.)
See some of my good fonts here: Sotorian (Encoded from English), City, and Betamaze!
THE DEVELOPMENT OF THIS FONT IS CURRENTLY TEMPORARILY PAUSED.
A simple and clean (10 px in width × 20 px in height) Unicode pixel/bitmap font, inspired by Unifoundry's Unifont typeface project.
This project is still very in-progress of making so it'll be a while until an actual release is made.
If you have any improvement ideas or reports on any incorrect glyphs, please tell me by commenting. I don't have much experience in designing glyphs for non-latin, especially symbol characters, so any help is greatly appreciated.
===================================
Unicode Blocks that are fully supported (excluding Unencoded Unicode characters):
- Basic Latin
- Latin-1 Supplement
- Latin Extended-A
- Latin Extended-B
- Latin Extended Additional
- IPA Extensions
- Spacing Modifier Letters
- Combining Diacritic Marks
- Greek and Coptic
- Greek Extended
- Cyrillic
- Cyrillic Supplement
- Phonetic Extensions
- Phonetic Extensions Supplement
- General Punctuation
- Superscripts and Subscripts
- Currency Symbols
- Letterlike Symbols
- Number Forms
- Arrows
- Mathematical Operators
- Enclosed Alphanumerics
- Box Drawing
- Block Elements
- Geometric Shapes
- Miscellaneous Symbols
Unicode Blocks that are in progress of making but are not yet finished:
- Supplemental Arrows-A
- Supplemental Arrows-B
- Braille Patterns
- Miscellaneous Technical (PAUSED)
- Dingbats
Unicode Blocks that have glyphs yet to be fixed:
- [none]
Computer System Primer is an educational-styled free font which spoofs Computer System 5×20. It is a font entirely made by me.
This is a clone of Computer System 5x20The NEW 7:12 Serif.
V13.5.2: Fixed Latin Extended-D.
V13.5.0-13.5.1: Made by xxIamcoolxx.(Old Me)
V1.0.0-13.4.4: Made by CMunk.
This is a clone of 7:12 Serif UnicodeU+E000 is the .notdef glyph.
This is the largest Nokia font ever.
UPDATE [27 JUN 2023]: Fixed "ÿ". U+00FF
UPDATE [29 JUN 2023]: Fixed "ǐ". U+01D0
UPDATE [09 NOV 2023]: Fixed "ـ". U+0640
Small Code is a grotesk monospaced font that is designed to include a variety of languages encoded in the BMP and SMP.
It also has a variety of letters in the PUA, such as capital versions of most Latin letters without capitals, characters for Latin letters not included in the Unicode standard, Swedish Dialect Alphabet compatibility characters, archaic IPA characters, Initial Teaching Alphabet characters, miscellaneous Cyrillic letters, Latin phonetic symbols, Tifinagh combined characters, alternate Latin letters for African languages and Polish, medieval extensions, unencoded and lowercase Roman numerals, unencoded mathematical symbols, numbers, superscripts and subscripts, unencoded control symbols, combining numbers, Unifon, unencoded fractions, IMFI forms of Arabic letters not encoded in Arabic Presentation Forms-A and -B, IMFI forms for Adlam, Powerline symbols, and coding ligatures.
This is my largest font yet!
This font has risen up to #5 on character count!
UPDATE: This font has fallen back to #8. :(
UPDATE 2: In the PUA, the upcoming Myanmar Extended-C block and Tai Khamti digits.
This font has extensions listed here:
Small Code PUA: https://fontstruct.com/fontstructions/show/2268345/small-code-pua
Ver. 1.0(Beta, 9.21.2021): 1st release
--------------(When to start adding Chinese characters)---------------
Ver. 2.0(Beta): I found an Expert mode, so I added some Kanjis(一, 亜, 咽 and etc.)
Ver. 2.01(2022.05.22, Beta): More extended latin A and Added 31 Kanjis
Ver. 2.02(2022.05.25, Beta): Completed Latin ext_A block
Ver. 2.03(2022.05.26, Beta): Added CJK symbols block
Ver. 2.04(Beta): Plan of adding 20 Kanjis and Fixing glyph bugs
Ver. 2.05(2022.07.10, Beta): Added some of KS X 1001 symbols
Ver. 2.06(2022.07.11): Added 59 glyphs of Kanjis
Ver. 2.07(2022.07.12):Added some of Latin Ext_B glyphs
Ver. 2.08(2022.07.13):Added 30 glyphs of Kanjis more Latin Ext_B glyphs
Ver. 2.09(2022.07.14):Completed Latin Ext_B block and Added 15 glyphs of Hanjis and Fixed some of Hanji glyph's Bugs
Ver. 2.10(2022.07.18):Completed Hangul Compatibility Jamo Block and Added some glyphs of Latin Extended Additional Blocks
Ver. 2.11(2022.07.24):Completed Basic Russian Cylliric letters on 'Cylliric blocks'
Ver. 2.12(2022.07.25):More glyphs on Latin Exteneded Additional Blocks
-(CJK Unified Chinese Character Simplified Chinese Character Addition Start Time)------------------------------------------------------------
Ver. 3.0(2022.09.8~12): Added 30 glyphs of Cjk for Simplified Chinese
Ver. 3.1(2022.9.20): Some of more Kanjis
Ver. 3.1(2022.10.2~7): Added 30 glyphs of Kanjis
Ver. 3.2(2022.10.20~22): Added some of more kanjis
Ver. 3.21(2022.10.30): Added 8 glyphs of Cjk for Simplified Chinese
Ver. 3.3(2022.11.4):Added 10 glyphs of Latin and 6 glyphs of Hanguls
Ver. 3.4(2022.11.10):Added 21 glyphs of Cjk for Simplified Chinese
Ver. 3.41(2022.11.22):Added 10 glyphs of Cjk for Simplified Chinese
Ver. 3.41(2022.11.24):Added 15 glyphs of Cjk for Simplified Chinese
Ver. 3.42(2022.11.25):Added 10 glyphs of Cjk for Simplified Chinese
Ver. 3.43(2022.12.17):Added 15 glyphs of Cjk for Simplified Chinese
Ver. 3.5(2022.12.10):Added 10 glyphs of Cjk for Modern Chinese
Ver. 3.51(2022.12.21):Added 5 glyphs of Cjk for Modern Chinese
Ver. 3.6(2023.03.13):Added 10 glyphs of Cjk for Modern Chinese
Added so far of unified Kanji(Chinese) counts:Total of 293 glyphs
--------------------------Plans----------------------------------
1. Completing JIS 1 level of Kanjis
2. Completing JIS 2 level of Kanjis
3. Completing JIS 3 level of Kanjis
4. Making 2,351 glyphs of Hanguls(10/2351)
5. Adding extended Latin glyphs up to 'Latin extended additional'
6. Completing basic Arabic blocks
7. Completing Hanji glyphs on 'List of Frequently Used Characters in Modern Chinese'
8. Completing Hanji glyphs on 'BIG 5 Common Character Set'
9. Completing KS X 1001 symbols
10. Completing Hanji glyphs on 'Table of General Standard Chinise Character'
11. Completing 'Russian cylliric' block
12. Completing Hanji glyphs on 'Xim Sans' (Total of 17912 glyphs)
Inspired by Greenstar987's GS Unicode 2.0 series (General idea), and Paul Hardy's GNU Unifont (Proportions). I gotten the idea to create a pixel font that supports Unicode.
-- Planes --
Plane 0 - Basic Multilangual Plane — [Here]
Plane 1 - Supplementary Multilangual Plane — [Here]
Plane 2 - Supplementary Ideographic Plane — [Here]
Plane 3 - Tertiary Ideographic Plane — [Here]
[No characters have been defined in planes 4 through D as of Unicode 15.0]
Plane E - Supplementray Special-purpose Plane — [This]
Plane F - Supplementary Private Use Area-A — [PUA]
Plane 10 - Supplementary Private Use Area-B — [PUA]
-- Note --
This font encompasses a plane, which doesn't have very many meaningful Unicode characters, but will still contain everything that is encoded.
Inspired by Greenstar987's GS Unicode 2.0 series (General idea), and Paul Hardy's GNU Unifont (Proportions). I gotten the idea to create a pixel font that supports Unicode.
-- Planes --
Plane 0 - Basic Multilangual Plane — [Here]
Plane 1 - Supplementary Multilangual Plane — [Here]
Plane 2 - Supplementary Ideographic Plane — [Here]
Plane 3 - Tertiary Ideographic Plane — [This]
[No characters have been defined in planes 4 through D as of Unicode 15.0]
Plane E - Supplementray Special-purpose Plane — [Here]
Plane F - Supplementary Private Use Area-A — [PUA]
Plane 10 - Supplementary Private Use Area-B — [PUA]
-- Note --
Ignore the fact that the "TIP" tag is all in lowercase when it should have been in capital letters. Whoever thought of the tag wrote it like that.
Inspired by Greenstar987's GS Unicode 2.0 series (General idea), and Paul Hardy's GNU Unifont (Proportions). I gotten the idea to create a pixel font that supports Unicode.
-- Planes --
Plane 0 - Basic Multilangual Plane — [Here]
Plane 1 - Supplementary Multilangual Plane — [Here]
Plane 2 - Supplementary Ideographic Plane — [This]
Plane 3 - Tertiary Ideographic Plane — [Here]
[No characters have been defined in planes 4 through D as of Unicode 15.0]
Plane E - Supplementray Special-purpose Plane — [Here]
Plane F - Supplementary Private Use Area-A — [PUA]
Plane 10 - Supplementary Private Use Area-B — [PUA]
— Current version: 1.5.0 (WIP) —
1.0.0 (14 March) — Made Basic Latin
1.0.1 (14 March) — Tweaked a few chars: 2 ‘ ’ “ ”
1.1.0 (15 March) — Added More Latin
1.1.1 (15 March) — Tweaked †
1.2.0 (15 March) — Added Extended Latin A and tweaked º
1.2.1 (15 March) — Fixed Ţ
1.3.0 (16 March) — Added Extended Latin B, fixed ¤ Ű ű, tweaked § ģ
1.4.0 (18 March) — Added Greek and Coptic and tweaked ȡ ȴ ȵ ȶ ´
1.4.1 (18 March) — Tweaked 0
1.5.0 (WIP) — Adding Cyrillic and tweaked Φ φ ͺ Ơ ơ
—————————
Sports font inspired by "jugio" (https://fontstruct.com/fontstructions/show/2028116/jugio-1)
More updates and characters coming soon!
Inspired by Greenstar987's GS Unicode 2.0 series (General idea), and Paul Hardy's GNU Unifont (Proportions). I gotten the idea to create a pixel font that supports Unicode.
-- Planes --
Plane 0 - Basic Multilangual Plane — [Here]
Plane 1 - Supplementary Multilangual Plane — [This]
Plane 2 - Supplementary Ideographic Plane — [Here]
Plane 3 - Tertiary Ideographic Plane — [Here]
[No characters have been defined in planes 4-D as of Unicode 15.0]
Plane E - Supplementray Special-purpose Plane — [Here]
Plane F - Supplementary Private Use Area-A — [PUA]
Plane 10 - Supplementary Private Use Area-B — [PUA]
Inspired by Greenstar987's GS Unicode 2.0 series (General idea), and Paul Hardy's GNU Unifont (Proportions). I gotten the idea to create a pixel font that supports Unicode.
-- Planes --
Plane 0 - Basic Multilangual Plane — [This]
Plane 1 - Supplementary Multilangual Plane — [Here]
Plane 2 - Supplementary Ideographic Plane — [Here]
Plane 3 - Tertiary Ideographic Plane — [Here]
[No characters have been defined in planes 4 through D as of Unicode 15.0]
Plane E - Supplementray Special-purpose Plane — [Here]
Plane F - Supplementary Private Use Area-A — [PUA]
Plane 10 - Supplementary Private Use Area-B — [PUA]
This was cloned from Kazuhito Morita's Computer System 5x20.
Please note that the remaining glyphs you see have been positioned to the left side. You may have to use FontForge before you can edit this font.
This is a clone of Computer System 5x20This is version 6.1.0 of Unicode D, which now supports more Cyrillic supplements, Latin-B supplements, and Mathematical Alphanumeric Symbols (they can't appear on any site, but you can download it just for free!).
Just issued on July 10th, 2020.
This is a clone of Unicode 5.0 (Unicode D Pre-Release)The Unicode bitmap font from Minecraft, also known as GNU Unifont. The game has a font priority system called "providers" that looks for bitmap data for a specific character in the non-Latin European character set first, then in the accented Latin character set, then in the game's low-res default font, then finally here, in the high-res Unicode character set. You can override this priority system by going into Options... > Language..., then setting "Force Unicode Font" to ON.
The game stores this font in images containing 16 rows and 16 columns of characters. Each character is 16 pixels wide and 16 pixels tall, totalling 256 characters per image. Each image represents one Unicode codepage, and there are 256 pages, which covers characters U+0000 to U+FFFF. Control characters and most CJK characters are omitted here, because FontStruct doesn't officially support them.
The font is not monospace, however, so the effective widths of each character are stored in a separate file called glyph_sizes.bin. Information for each character is stored in one byte, and the upper and lower 4 bits of this byte represent the start column and end column with a number ranging from 0 to 15, where 0 is the leftmost column of the character's allotted 16x16 space, and 15 is the rightmost column, respectively.
Knowing all of this allowed me to automate most of the steps involved in creating this recreation. I did not use the FontStructor to make this, I instead used a program to directly interact with FontStruct's API. It is possible to add unsupported characters to a font with this method, but I chose to stay within the limits of what is officially supported.
This is the first font I ever made since I obtained its first debut on January 25th, 2019. As you might have guessed, this is Computer System 5x20, but only the font you see has its size of 48 pixels.
I have also used Combining Diacritical Marks for this type of unicode only because not only it works with combining a diacritical mark into this letter, it can also be used for international/worldwide purposes.
See also:
Pixel Math
Revamped with New Heathcliff Helvetica, this is the Unicode version with IPA and phonetic supplements as well as Latin Extended-D.
First edited on May 30th, 2021. Last edited and modified on June 25th, 2021.
This is a clone of New HTCLF Helvetica