A simple 12×16 font made up of pixels. Contains all of ASCII, box drawing characters, some block elements, plus some random characters from other sets. Made for use in my ASCII Roguelike. Do whatever you want with it. I don't care.
Another variant on Derpberd, this time with outlines.
VERSION HISTORY:
08 Feb 2018 - v1.0 finished. Uncertain of which characters could be added while retaining the "constant height" rule.
This is a clone of DerpberdA bold variant of Derpberd, again made to have a constant height in order to be suitable for pixel comics. Most of the character widths are unchanged, but some (like m and w) had to become 1px wider for the bold style to work.
08 Feb 2018: version 1.0 declared finished. I'm not sure where else I can take this one without breaking the "constant height" rule. Perhaps I'll clone it and make a version with an extended character set, but only if people ask. :^)
This is a clone of DerpberdThe 3x6 pixel font from the Virtual Gremlin, an old game of mine. This font and the 5x5 font were used for most in-game text, as they're the only ones that have lowercase.
A few letters are allowed to break the resolution constraint.
The 5x5 pixel font used for the Virtual Gremlin, an old emulator/game I wrote. The standard font for ingame text.
This font was also designed to work well with IRC clients and ASCII games (see sample).
Breaking the 5x5 grid was unfortunate but necessary in order to make legible characters in non-Latin languages.
Just a simple pixel font I created for use in pixel webcomics. It has a constant height which makes it good for use in speech bubbles, titlebars, and the like. I made this one to look "open" and to have lots of negative space despite its diminutive size. This family of fonts is getting pretty large, so if you make pixel webcomics (or anything else that needs tiny text in neat rows), check 'em out!
This font is used by several Twitch streamers and in several games as well as in my own pixel comics.
VERSION HISTORY:
04 Feb 2018 - v1.0 released
12 Mar 2018 - v1.1 released. More Latin added.
Another variant of Derpberd, with a look reminescent of Dymo labels and Closed Captioning messages. It can also be used to create official-looking documents. :D
This is a clone of Derpberd OutlinedAnother Derpberd family font. This one was created because I was making comics and needed a slightly different font for a new character's dialogue.
This is a clone of Derpberd BoldA serif-ized Derpberd which works within the limitations of the original font.
I welcome suggestions for this one. It's my first time attempting a methodical serifed look, and the small size of this font makes it a challenge.
This is a clone of DerpberdA 12x12 pixel font designed for use alongside microfonts, especially the "Derpberd" family it's modeled after. These large letters help decorate the start of a new chapter in a manner similar to the art fonts of illuminated manuscripts. I think this makes a decent "high-tech" or "board game" font, too! :D
Alternate style on lowercase (alternate ,.!? are on <>/~). The symbols and numerals have a slightly altered frame to help differentiate them and add some flavor.
Another variant on Derpberd, this time with the alphabets condensed to a 3x5 grid while maintaining the constant height. This is made to allow a great density of text in a small space while still being readable and somewhat stylish. Useful for webcomic authors, pixel artists, etc.
This is a clone of DerpberdA 3x3 microfont from the Virtual Gremlin, an old game of mine. This is designed to look tiny and indistinct. Useful when writing jargon, placeholder text, or technobabble (the kind of meaningless information you'd write when drawing a newspaper or computer terminal).
VERSION HISTORY:
08 Feb 2018 - v1.0 declared finished.
11x11 version of Illuminated Flamingo. Made to achieve a hybrid look between Derpberd Condensed and Gremlin 3x6, allowing this to be used with a greater range of microfont styles.
This is a clone of Derpberd Illuminated 12x12An experimental design inspired by megalithic structures, especially Inca stonemasonry. I wanted to create letterforms that looked like worked stone (with minimal gouges or openings into the stone) and that looked like they could actually stand up on their own as stone structures. The asterisk, quotation marks, etc. are obvious exceptions, since they need to be free-floating (although I did modify their spacing to make them appear to "rest" on the surrounding letters.)
The slants applied to the "stones" are just for style. :^)
A dot-matrix version of "Official-Ish", and a test of the Filters. :^)
The author recommends using this font at sizes that are multiples of 13, starting with 26, to ensure perfect pixel size/placement. 26, 39, 52, etc. were tested and looked perfect to my eye.
TIP: Size 13 looks like regular "Official-Ish"! You can treat this as two fonts in one for art purposes.
This is a clone of Official-IshAn attempt to make an entire alphabet by modifying a single heptagon shape. (The "O" is the basis for almost all other glyphs.)
An alternate version of this was made in which I used different bricks to make the width of every line homogeneous. However, it was found that this robbed the font of much of its character. Additionally, the visual effect presented by the increased line width actually made the font less even-looking than it is now. This proved true with and without antialiasing.
Continuing on the theme of choosing a regular shape and making an alphabet out of it.
Looks best at smaller sizes (<24pt) and with antialiasing/ClearType turned on.
Can this be done better with filters? Probably, but I still have to learn those... :D
From various games written in my ESOS engine.
When Malil Ehnetahine wishes to speak, she calls up the wind to bring her Temper Tree leaves, which form the shapes of these letters.
This font is accurate to the ingame font and is finished.
Official font of AMFA (formerly ATMA), the main rival of MARENGI Omnisystems in Endless Sea Of Stars. Appears throughout my games (especially those using the ESOS and ESOS-Lite engines) and is used as the main font of ESOS Terminal A (the one doing the super-long survey).
Between 2012 and 2014, ESOS Journey-Depth AI entities collaborated to produce this specific arrangement of pixels as the most legible form of 1px wide, monochrome 8x8 Latin for electro-optical systems (Marinan Interpretability Value 9.29).
This font is useful if you want to write some really efficient text recognition software for a robot with a camera, or if you want a pixel font which elicits a high degree of reading accuracy. Some would argue that the uppercase makes it less readable, but you'll be hard pressed to find another font that is THIS readable in uppercase only!
This is a cloneDonjon16: My take on a dungeon font. Create your layout with A-Z, move the caret to right after the room you want to edit, then type the letter for a trap, monster, and/or object and it will appear in that room. You can stack multiple smaller creatures or objects inside a room.
When one room's opening runs into another's wall, it makes a distinctive notch in the wall. I consider these to be closed or secret doors, but your design doesn't have to have them. :^)
Only the smaller monsters/items can fit into the corridors. However, you can fit up to three of the smaller monsters into a single corridor (5 if you use the 4-way corridor)!
This was actually designed to make minimap graphics for one of my games, and derives some inspiration from the maps in early Zelda games (The Legend of Zelda, The Adventure of Link, Link's Awakening, Link to the Past, etc.).
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
- ROOMS & MAP SYMBOLS -
ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕ = floor number markers (B7 to F16)
×ØÙÚ = compass markers (North, East, West, South)
ABCDEFGHIJKLMNOP = 16x16 rooms
RSTUVW = corridors
space bar = empty voids
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
- PLACEABLE THINGS -
(These all have a negative spacing, so they must be typed AFTER the room you want to put them in.)
X = teleporter or Magic Stone
YZ = stairs up/down (They take up the entire room)
0123456789 = traps & hazards - spike trap, pit trap, ice trap, trapdoor trap, teleport trap, arrow/dart trap, etc. (They can overlap monsters; use some discretion)
abcde,fghij,klmn = small monsters - kobolds/goblins, humanoids/skeletons, slimes (They appear in a cross or X shaped grid, max 5 per room, 9 if you use them together)
opqr,stuv = medium monsters - skulls, bats/imps (They appear in corners, max 4 per room)
wxyz = big monsters - knight, dragon, serpent, big skull (They take up the entire room)
!@#$%^&*()[]{}\|<>?/:';" = equipment - weapons, armor, potions, maps/scrolls, runes, compass, and more (Usually takes up a whole room)
`~_=-+ = gold, gems, key, chests (Usually takes up a whole room)
àáâãäåæçèéêëìíîïðñòóôõö÷ = special characters (NOT YET IMPLEMENTED)
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
- TIPS -
Make the dungeon layout first, THEN start adding things to it.
Better to have a treasure vault guarded by monsters in the next room than to try to cram them all into the same room. The same holds true with many traps.
If you use the floor number markers, you can have up to 23 floors in all - 7 below-ground and 16 above-ground.
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
The main font used by MARENGI Omnisystems in my video game series, "Endless Sea Of Stars". These letterforms can be found engraved into or projected onto practically every piece of MO technology. This script was designed in 2011 to be suitable for printing, logo design, art, and many other purposes. It lacks the constant height which most of my other pixel fonts have, but makes up for it with its bookish appearance.
Unfortunately, replicating the exact design of the antialiased version of this font is impossible, not only on FontStruct, but on all software other than ESOSVM. This is because ESOSVM uses a custom renderer which makes use of proprietary techniques. Marengi HD comes close, but not very.
------------------------------------------------------------------
Versioning:
2.6 (19Aug2018) - "bdďđ" were perfected. Space width reduced.
2.5 (20Jul2018) - "IÌÍÎÏø" were perfected and massive kerning work began.
2.4 (15Jul2018) - "J" was perfected and several letterwidths were altered.
2.3 (18May2018) - "hnru34679ÀÁÂÃÅÈÉÊÌÍÎÏÑÒÓÔÕØÙÚÛÝÞßàáâãåæçèéêìíîïñòóôõøùúûý" were perfected.
2.2 (17May2018) - ":;gjty%/\ÂÆÊÎÔÛâæêîôû¼½¾" were edited for more consistency and readability.
------------------------------------------------------------------
MIV: 8.74
Original size: 11pt (use multiples of this value for pixel perfection)
------------------------------------------------------------------
A connected script which attempts to depict an obvious ductus or flow to the writing. To set this one apart even more from my others, I built the capitals on a 6x6 grid.
The name comes from yet another old joke band.
Original size: 5.25pt (use multiples of this size for pixel perfection)
A tear-off ticket design. I went for the slightly gaudy look which is associated with carnivals and arcades.
While making this I also got the idea for a font which looks like a 35mm reel with little scenes on each segment...
Original size: 14.25pt (use multiples of this value for pixel perfection)
A clone of Marengi with some brick-substitution and filters applied. Has a "rightward" momentum that seems to push my eyes along as I read, as well as a connectedness which makes words seem nice and solid despite being segmented.
This is a clone of MarengiA 2x2 design which started with a "split" aesthetic and ended up with a "stenciled" one. I embraced the change and now all these glyphs are functional as stencils. They contain minimal stacking and no composites.
In some cases the inside is connected to the outside at only one point. If you decide to use this for stencilling, I recommend using a stout material for the stencil and storing it with care.
The name comes from one of the many, many old joke bands which I created.
Recommended: Use with kerning turned on!
For this font I decided to do several things I almost never do with other pixel fonts.
First is the use of an 8*8 grid. I consider this size tough to work with so I tend to stay away from it, preferring X*7 or X*9.
Second is the rounding or softening of all 90° angles. 3- and 4- way intersections are exempt from this rule. However, some other acute angles were rounded as well.
Third is kerning, which helps ease this font back into microfont territory a bit by reducing excess space. I usually design pixel fonts so they don't need this, but not this time!
Fourth is the embrace of asymmetry throughout most letterforms, which is almost a natural consequence of making a font on the 8*8 grid.
Fifth is extending MmWw. I usually try to truncate these letters to fit my grid. Sometimes I make a symmetrical design for them, but this time I just let 'em sprawl.
Despite all these differences in methodology, I think this font looks rather like a hybrid of "Marengi" and "AMFA". Very pleased with the result!
A star font which combines a pixelated look with halftone shading.
It needs some form of antialiasing to be legible at small sizes. (See sample below or try the Pixel views). At larger sizes, you can use it with or without antialiasing!
Original size: 12pt (use multiples of this value for pixel perfection)