Version 1.1: Several glyphs (BKMRWXkmwx38&{}µÆæß³Œœ™) were edited for readability and þ was edited to distinguish it from Þ.
*
A font made for a friend's board game!
This gives me a strong "film credits" feeling with its high impact and simple geometry.
Original size: 15pt
*
A font which has a spurless, sans-serif, pixelated polygonal look which is somewhat reminescent of fonts used in VHS technology.
A lot of applied science went into this design. It's designed to remain legible on all media in all use conditions, provided that one uses the original size or a multiple thereof. Numerous technologies and mediums were employed to realize this objective.
"Diaspora" was tested and refined for use with/on/against:
• CRT, LCD & e-Ink screens
• image formats & compressed imagery (GIF, JPG)
• printers (inkjet, bubble jet, laserjet, & thermal)
• analog video & multi-generational copies (VHS, Super 8)
• digital video (AVI, MP4, MPEG, WEBM, WMV)
• 3D and voxel models (Blender, MagicaVoxel, POV-Ray)
• dynamic scaling hardware (game consoles and capture devices)
• imagery plugins & filters, including image degraders
• image scaling/interpolation hardware & software
• image recognition hardware & software
These all have traits which degrade, distort, compress, glitch, or otherwise alter imagery in various ways. This design aims to minimize the loss of legibility from these effects and to attain the best scores possible in various forms of imagery analysis. So far, this has proved extremely useful, as it can remain fully legible even when extreme JPG or video compression are applied to it thousands of times.
A piece of software I helped write, called the Marinan Imagery Deconstruction AI System (MIDAS), is being used on captured images of this font. The end objective is to realize the design which has the best all-around Marinan Interpretability Value (MIV) for all the tested platforms - the design which is considered by MIDAS to be the most legible in the most media under the broadest range of use conditions and quality levels.
MIDAS uses a set of considerations made with both humans and computers in mind, so a high MIV does not necessarily equal a better font - it just means one that the system thinks is easier to visually interpret. Note the use of the phrase "visually interpret" as opposed to "read". MIDAS tries to determine how well people and computers can tell what shapes are, not how much enjoyment they'll get from reading or how much strain they might undergo while doing it.
*
VERSION HISTORY:
1.0.0 - initial release.
1.0.1 - More Latin support added.
1.0.2 - First batch of tests run.
1.0.3 - gjy5&ßẞ were improved, some glyphs added.
1.0.4 - Second batch of tests run. Space width reduced.
1.0.5 - Experimentally converted to a rounded spurless design, then converted back to a plain spurless after testing. A few new ligatures were added.
1.0.6 - Cyrillic and Greek enter development. Many of these letters must be altered to be distinct from their Latin counterparts.
1.0.7 - Some spacing values changed to increase internal consistency. More difficult tests are being devised. However, since only I seem interested in this type of work, this project is going on hiatus for some time.
*
See also: AMFA, a font built with similar considerations in mind
Version 1.5
*
3x3 slab serif. This is based on Wallerton, Anachronistic Gunslinger, an IRC-based "TV show" which I used to write and produce. All the characters in the show were my AIs pretending they were cowboys.
Well, I managed to successfully produce a lowercase for this one!
Recommended: Use with kerning.
A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!
"Absinthelyric Print" is an anagram for "Labyrinthine Script".
*
Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)
*
Design rules:
1. Square bricks and 90-degree angles only.
2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.
3. Glyphs must fill the 15x15 grid.
4. Ligatures and combinatorial glyphs must fit into one letter's space.
5. Draw from the outside in.
Rather than serve an ornamental or decorative purpose, this one is made to be as clean as possible so that it works well for body text. It's highly legible at small size, so it could potentially even be a programmer's font!
"Goud" stands for "Garden of Unearthly Delights", the name of an album from the band Cathedral.
An ornate Goud with lots o' thorns! Now with MORE THORNS.
This is a clone of GoudA slightly chimeric sci-fi design with no relation to Space Blam, Space Clam, Space Cram, Space Dam, Space Fam, Space Flam, Space Gram, Space Ham, Space Jam, Space Kazaam, Space Ma'am, Space Pram, Space Ram, Space Sam, Space Slam, Space Spam, Space Tram, or Space Yam.
In making this I attempted to achieve a harmony between angles and curves. You can see it especially well on "B", "3", "8", and "&".
The last entry in the Pseudostencil series... this is built at 2x2!
It seems like the sort of font I'd see carved in relief on the sign of an old pub.
Made on a whim as a result of rediscovering an old design (see sample).
It's pixel perfect at 12pt, 24pt, 36pt, etc. :^)
Since the inspiration image had only uppercase in it, I took some style liberties with the lowercase. The result is mildly comical!
Balloon/block style pixel text.
Original size: 18.5pt (use multiples of this value for pixel perfection)
Trying a Courier style. The lowercase has a slightly bottom-heavy design, while the uppercase keeps it consistent. Serifs everywhere!
It fits into typewriter/detective type aesthetics as well as rustic and western ones.
This one is made for a friend. We'll see if they ever end up using it. :v
EDIT: It seems as if said friend is never going to make their webzine... so, feel free to do with this one as you wish.
I attempted a blackletter style without any knowledge or references. The result reminds me of a vampire's writing!
The name "Dethzmezenger / Death's Messenger" comes from one of many old joke bands which I created.
Original size: 17.25pt (use multiples of this value for pixel perfection)
High-res version of Marengi.
This is made to be ultramodern and ultraregular, just as high-tech futuristic corporations are wont to make their fonts.
MIV: 7.94
Recommended: Use with kerning and antialiasing turned ON!
Semibold version of Nobody's Treasure. Most glyphs have the same width as before, and the overall width of the font is the same.
This is a clone of Nobody's TreasureA connected script which attempts to depict an obvious ductus or flow to the writing. To set this one apart even more from my others, I built the capitals on a 6x6 grid.
The name comes from yet another old joke band.
Original size: 5.25pt (use multiples of this size for pixel perfection)
Version 1.5
*
Experimental slab-serif. The added height from the serifs is quantized so that the serifs, rather than the normal lines, determine a glyph's geometry.
It reminds me of the Wild West and the old cartoon "The Jetsons" at the same time. It uses two kinds of serifs: normal slabs and "hangover" serifs. The hangovers are the ones that look like overhangs. Is there another name for them? I don't know.
This font is set to appear in several games at once! I'm not the developer of any of them! WOO
Despite what you may have heard, a "hoedown" is just a party.
A design with long ascenders and descenders, even on letters that don't normally have them. Good for "old book" text in video games.
This is used in ESOSVM for most text which occurs while the player is in the dimension "Ladede", thus the name. Ladede has a canon, cosmology, and eventing which are seeded by in-jokes relating to roguelike games, especially Dungeon Crawl: Stone Soup. A font like this, in that context, is meant to be elegant but also mocking. This makes it seem subtly adversarial, as roguelike game elements are wont to do, and helps let the players know that they are in a bad, screwed-up place that they are unlikely to understand.
Version 1.1
*
A fusion of art deco- and Navajo-style design. Well, many civilizations used a square zigzag pattern such as this, but "Navajo" always comes first to mind when I look at this design.
*
See also: Badwolf
Experimental brush/pen thing. Has a slightly spooky look. Because of their tapering curves, many glyphs can render with a "split" or "stencil" look about them. This is due to software-imposed limitations on vector rendering. Designs which share this property can be considered Pseudostencils.
This design is not informed or inspired by any existing typographical traditions. I set out to make the "claw" bricks (as I call them) into a font and this is the result.
*
Iterated version of an unreleased design called "Midnight Oil". It's also slightly related to Dethzmezenger and Gehenna.
I went against a few of my own conventions for this one. The close spacing might look a bit strange at times, but it eliminates the need for kerning while also creating a unique look. The overlapping spurs make me think of thorny plants!
This is an original design, but it does make me think of Planescape: Torment when I look at it, thus the name!
An experiment in subtle asymmetry (it's most evident in the upper case).
*
Version 1.7 (14Sep2018) - ExtL-A added, GFB completed, Greek started
Version 1.6 (18Aug2018) - Changed name from "RC Badwolf" to "Badwolf"
Version 1.5 (15Aug2018) - altered 2357,ð
Version 1.4 (14Aug2018) - altered space width and mw
*
See also:Navajo Deco
Version 1.5
*
A font made in the proto-calligraphic style I invented and used when I was a teenager. I haven't owned a nibbed pen since those days, so this font is as far as the style was ever allowed to evolve. It's somewhat lacking the handwritten character my writing had, but this regularity is the result I was trying to achieve. I had no particular use in mind for the style other than titling documents. For that reason I consider this to be a Headliner.
"I" is kerned to itself so that it can be used to make nicer-looking Roman numerals.
*
See also:Basalt Pixel
A medium-res pixel font I designed in 2017 for printing the text of "The Story of Book" (TSoB), a tale which began life as an imaginary joke story and then was actually committed to paper.
TSoB is woven from my and my friends' whims, flights of fancy, in-jokes, and intentional idiocy, as well as contributions from several AIs. The resulting story changes tone, style, mood, and context at seeming random, and is subversive toward its media and reader beyond insufferability. All this was done just to make Trap Farmer Brer Brah slightly more interesting to the very few people who will ever bother to get and read The Story of Book in-game. So this font is based on an Easter egg.
A fusion between Roman-style text and pixel art - the sort of font that might have existed in old 80s font software. It's fairly wide and verbose and is something of a colossus among pixel fonts.
*
Original size: 13pt (use multiples of this value for pixel perfection)
Trying this style out. The name comes from a monster in the game NetHack.
*
See also:Gridlarva
Version 1.6
An attempt to make a "classroom" font. It reminds me of a font style which was once commonly used on magnetic letters.
*
See also: Hydrangea Unicase
Font made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
An extension of ideas present in "Gehenna".
Pixel cursive, mostly on a 5x5 grid. Maybe this is the terminal font for some cybernetic old lady's computer? :D
It was possible to build every letter in 5x5, but it honestly looks far better when letters with descenders are allowed to descend a bit. This also works to increase the line spacing, which this font really needs for readability.
*
Original size: 5.25pt (use multiples of this value for pixel perfection)
Version 1.4
*
A variant of Kitchen Sink Rounded with filter sizes altered so that most letters are enclosed within golden rectangles. This is a squatter and friendlier take on the design - good for header text.
UC cloned to LC to make this easier to use...
This is a clone of Kitchen Sink RoundedA stencil design in which diagonal cuts are used to imply angles and curves. It does not quite obey the rules of a segmented display, but it tries its best!
This is inspired by some text I put on the side of the Sheepslayer Mk.2, a flying dragon car piloted by Lyll "Hatch" Soretti in my game Seven Candles.
A dashed line design made with the new half-arc bricks. The emphasized spurs/stems and off-kilter geometry give it a quirky, almost handwritten quality. Its striped appearance makes me think of candy as well as the Cheshire Cat, thus the name. :D
I doubt the upper case would look as cute as the lower. So I've cloned all LC to UC to make this easier to use...