A design that looks like a top-down view of ziggurats!
I composited the diacritics so they'd fit into place, but this means that most anything non-English needs to be pretty large to be unambiguously read...
Original size: 15pt
*
A font which has a spurless, sans-serif, pixelated polygonal look which is somewhat reminescent of fonts used in VHS technology.
A lot of applied science went into this design. It's designed to remain legible on all media in all use conditions, provided that one uses the original size or a multiple thereof. Numerous technologies and mediums were employed to realize this objective.
"Diaspora" was tested and refined for use with/on/against:
• CRT, LCD & e-Ink screens
• image formats & compressed imagery (GIF, JPG)
• printers (inkjet, bubble jet, laserjet, & thermal)
• analog video & multi-generational copies (VHS, Super 8)
• digital video (AVI, MP4, MPEG, WEBM, WMV)
• 3D and voxel models (Blender, MagicaVoxel, POV-Ray)
• dynamic scaling hardware (game consoles and capture devices)
• imagery plugins & filters, including image degraders
• image scaling/interpolation hardware & software
• image recognition hardware & software
These all have traits which degrade, distort, compress, glitch, or otherwise alter imagery in various ways. This design aims to minimize the loss of legibility from these effects and to attain the best scores possible in various forms of imagery analysis. So far, this has proved extremely useful, as it can remain fully legible even when extreme JPG or video compression are applied to it thousands of times.
A piece of software I helped write, called the Marinan Imagery Deconstruction AI System (MIDAS), is being used on captured images of this font. The end objective is to realize the design which has the best all-around Marinan Interpretability Value (MIV) for all the tested platforms - the design which is considered by MIDAS to be the most legible in the most media under the broadest range of use conditions and quality levels.
MIDAS uses a set of considerations made with both humans and computers in mind, so a high MIV does not necessarily equal a better font - it just means one that the system thinks is easier to visually interpret. Note the use of the phrase "visually interpret" as opposed to "read". MIDAS tries to determine how well people and computers can tell what shapes are, not how much enjoyment they'll get from reading or how much strain they might undergo while doing it.
*
VERSION HISTORY:
1.0.0 - initial release.
1.0.1 - More Latin support added.
1.0.2 - First batch of tests run.
1.0.3 - gjy5&ßẞ were improved, some glyphs added.
1.0.4 - Second batch of tests run. Space width reduced.
1.0.5 - Experimentally converted to a rounded spurless design, then converted back to a plain spurless after testing. A few new ligatures were added.
1.0.6 - Cyrillic and Greek enter development. Many of these letters must be altered to be distinct from their Latin counterparts.
1.0.7 - Some spacing values changed to increase internal consistency. More difficult tests are being devised. However, since only I seem interested in this type of work, this project is going on hiatus for some time.
*
See also: AMFA, a font built with similar considerations in mind
A dashed line design made with the new half-arc bricks. The emphasized spurs/stems and off-kilter geometry give it a quirky, almost handwritten quality. Its striped appearance makes me think of candy as well as the Cheshire Cat, thus the name. :D
I doubt the upper case would look as cute as the lower. So I've cloned all LC to UC to make this easier to use...
Version 0.2: Improved all glyphs, added More Latin, changed name to "Letsago".
TODO: Make line widths more consistent, especially on numerals.
*
A friendly, but slightly obtuse font. I think these polygons are the smallest and simplest ones which can be made with stock FS bricks and used to create glyphs with a truly circular appearance. This only works up to a certain size before the look reverts to that of a polygonal sans-serif, but it works very well up to that point!
This is the culmination of knowledge gained from several other experiments, such as Marginalia. It should be very difficult to make a smoother font from this at the same grid size while still using stock FS bricks.
Some kerning is done, but the majority of it will be done once every glyph is considered to be perfected. For now, you can use vector software (like Inkscape) to manually kern pairs.
A font made to be very economical.
This design uses as few unique shapes as possible. In addition to extensive rotations and flips (see AR, EMW, FL, GJUV, IHKT, NSZ25), glyphs are made so that they can be cut down to make other glyphs in as few cuts as possible (see BEI, used to make ACDFLMNOPRSWYZ1235689). Some other glyphs (see QX.,) then make use of the cut parts.
This means that, were these letters to be physically made, the maker would only need a few forms to start with and could cut the rest in only a few steps.
The name was chosen because of both a running joke between friends and because it was the coolest-looking phrase I tried when I auditioned the font.
commission for starstruck (@starstruckboye on twitter).
fs Stainless Square
==================================================================
Basically just fs Stainless but more geometric and sharp
I use composited bricks to closely fit with the connects since there are no sharp wedges for the connects
A display typeface (probably best viewed small, I'm aware!) based upon some physical type I made from dark food colouring etched into sugar syrup. This was to represent the brief theme I picked of 'unstable', hence why all the characters are completely induvidual in size and shape. I have also published a second version which displays what happens when the food colouring bled into the sugar syrup.
A double-line style with a twist. Named for the Exage Viral Armada (EVA), a mutagenic virus featured in several of my own games and stories. EVA causes rapid limb bifurcation and the spontaneous generation of butterflies, both of which can be seen in various glyphs from this design.
The exact rules for this are somewhat complicated, and based on structural as well as visual analysis. The basic idea can be seen on glyphs like k and x: Closed loops (double line) are joined by single lines which turn back on themselves to create the illusion of more lines. Of course, this idea had to be modified for most of the other glyphs, for the sake of stylistic consistency and visual interest. Particularly, almost all the spurred glyphs have the double-line structures open up to form the spurs.
This is a cloneExperimental sliced sans serif. My goal here was to make a design which would result in an extremely compact and durable physical stencil. Almost all of the sharp points and acute angles are within the negative space, so it should be easy and very safe to make, handle and work with this stencil.
*
Version History
1.3 - added More Latin and Google Fonts Basic bands.
1.2 - added uppercase, changed name to "Aegris Stencil".
1.1 - edited for more readability at small size. Glyphs with enclosed loops were altered so that the "movement" of the segments always runs clockwise.
1.0 - released.
Iterated version of an unreleased design called "Midnight Oil". It's also slightly related to Dethzmezenger and Gehenna.
I went against a few of my own conventions for this one. The close spacing might look a bit strange at times, but it eliminates the need for kerning while also creating a unique look. The overlapping spurs make me think of thorny plants!
This is an original design, but it does make me think of Planescape: Torment when I look at it, thus the name!
An ornate Goud with lots o' thorns! Now with MORE THORNS.
This is a clone of Goud