Searching for more “Sans Serif” fonts?
Buy and download “Sans Serif” fonts at MyFonts.
Based on a typeface which was used in the opening credits of The Terminator, The Running Man, Class of 1999, and also used on Robert A. Heinlein's book covers (there's a font called Heinlein which is similar). I've been looking for the original for a long time but haven't found it, so I recreated it myself. (Edit: apparently it's called Bessellen)
Now updated to be closer to the original, plus added kerning.
STF_EIN BERLINER - Condensed geometric sans-serif typeface.
Inspired by the lettering seen on a variety of different Dutch and German street signs.
The simple and clean geometric letterforms provide this typeface with a strong legibility in both display & body style text.
(grid size 3,5 × 7 at 2x2 brick size filter)
Enjoy
TYPE-O-NEG4TIVE ― Avant-Garde reverse-contrast inspired sans
═════════════════════════
Experimental endeavor into avant-garde, reversed-contrast inspired letterforms.
I will explain the font in more detail bellow in the comment section.
Cheers
RINKEL — Bold constructivist display design
════════════════════════════════════
This was very much influenced by the rare sighting of
1974's Lettergraphics International typeface by the name 'Belden'
Belden was shown in a Lettergraphics ad in U&lc vol. 1, no. 3 from 1974, without further design credits. It was also featured in the book cover design for "Metaphysics: An Introduction" by Keith Campbell.
—Which in terms I have used for my personal extrapolation of the complete character set of this FontStruction.
────────────────────────────────────
Not a digitizing revival of the original piece, but rather a very strongly inspired personal take on it.
—More complete character set is coming soon..
Let me know what u fellow structivists think of it so far!
Cheers
FAKOS VARYTITAS - Futuristic Sci-Fi stencil design
═════════════════════════
A Stencil letter with a rather unorthodox form.
The main concept is that of the Sci-Fi / Tech aesthetic. But the asymmetrics in its geometry, various custom build curves and incisions somewhat tune down the mechanical geometric tone of the letterforms, and introducing a slight more humanized touch to its rhythm. These non-traditional attributes making this more of a novel stencil typeface with a strong personality.
The typeface was inspired by space age tech. Its a display style font that is perfect for when your project has to have that typical techy or futuristic aesthetic look. Its best used at large size, but it does work in smaller size format as well.
The font includes:
• uppercase, lowercase & numerals
• accented latin
•diactritics
• symbols & punctuation marks
• ligatures
• some glyph alternatives
• ornamental decorative elements
All "lingual" characters are functional stencils, the only exceptions that aren't stenciled are the ornamental decorative symbols and dingbats.
Cheers
This is a cloneVOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESA double-line style with a twist. Named for the Exage Viral Armada (EVA), a mutagenic virus featured in several of my own games and stories. EVA causes rapid limb bifurcation and the spontaneous generation of butterflies, both of which can be seen in various glyphs from this design.
The exact rules for this are somewhat complicated, and based on structural as well as visual analysis. The basic idea can be seen on glyphs like k and x: Closed loops (double line) are joined by single lines which turn back on themselves to create the illusion of more lines. Of course, this idea had to be modified for most of the other glyphs, for the sake of stylistic consistency and visual interest. Particularly, almost all the spurred glyphs have the double-line structures open up to form the spurs.
This is a cloneBy popular demand, I'm very proud to present you this recreation/digitization of Maxim Zhukov's Meander (an experimental modular type design from 1972, which was used in cover artworks for Stereolab's Dots and Loops album and Miss Modular EP).
Now supports Cyrillic characters and includes other custom-made glyphs, like numerals and punctuation marks.
References: Type Journal: "Towards an open layout: A letter to Volodya Yefimov", "Искусство шрифта. Работы московских художников книги. 1959–1974" (The Lettering Art. Works by Moscow book designers 1959–1974), pg. 35
BENGALIQUE - Contemporary grotesk type
A condensed geometric Grotesque style, that at first glimpse looks somewhat simplistic. And for the larger part this is true. The goal was to do a ever so slightly spiced up take on this 19th Century classic style.
At it's core, the letterforms have this strong geometric grotesque backbone that is easy to recognize.
While trying to preserve that unpolished characteristic classic Grotesque basic form, I attempted implementing some personal twists, hoping to make a more contemporary but faithful variation to it's crude classic renegade traditions.
Some of the more distinguishing features for this font are it's heavily condensed style, the somewhat quirky curvatures, overshoot and/-or tapered ends in certain 'sweet spots' on a glyph's leg or terminal.
At random some legs will also ascend and descend just a tiny tad bit, gently adding this extra layer of dynamic depth and playfulness.
Spurs are slightly tapered, counters, negative spaces are in mostly rectangular and do not mirror their convex outer curves, in fact the only concave curvatures within a partially enclosed negative space are those that have strokes intersecting or when a curved shape is used to replace diagonals.
(such as; "B, Kk, Ss, Xx, Y, Zz" numerals; "2, 3, 5, 8")
Note that a couple more unmentioned characters make use of concave curves as well to accentuate specific choices.
(such as; "R, t, ß, etc.")
Visual corrections and optical compensating was exclusively performed on the top part of the glyphs, not their bottom.
-- Some additional side-bearing and kerning is still required --
No filters used...
The font works best for 'Display Type' at most point size. In smaller quantities it can be used for 'Body Type' as well with some proper adjustments to the horizontal spacing. But, nonetheless the font's condensed nature, it's tight letter spacing and some thinner strokes still heavilly affect the flexibility for legible Body-Type-use.
Recommended size for Digital-Display-use is 28pts or higher, and bellow 20pts the font becomes unreadable in Digital-Display-use. But I hope you like it so far, and feel free to let me know what u guys think! ?
That's all for now folks..
Cheers
ARS NOUVEAUX - Art Nouveau inspired display typeface
═══════════════════════════════════
A personal digital reimagination of the lettering style by "Charles Rennie Mackintosh" (1868-1928), a pioneer of the "Glasgow School of Art" and so called "Arts & Crafts" movement.
His distinctive style of lettering has been seen many revisions, revivals, reimaginations and inspired designs alike over the years, and has evolved into a broad collection of available fonts.
This basic stylistic lettering concept from Mackintosh sort-of losely funcioned as the structural guiding principle for the creation of "Ars-Nouveaux".
This FontStruction is an experimentation into creating similar flavored, but still unique letterforms within that same design framework.
First I started to layout the overall basic asymmetrical core geometry from a set of custom rectangles, half arc's and slants for each of the letters bare skeleton shape. Once I completed the full set of 36 glyphs [a/z, 0/9] These basic shaped were then further modified into more sophisticated finalized letterforms.
Caps-only, but with many alternates, accompanied by a set of ornate initials.
Hope you like it,
Cheers
This is a clone