This is a font called "InfiniNikiFanStruct2023 Max" created using the FontStruct specification.
The default value is 9999999999x characters.
This article is very persuasive. ! ! !
I encourage you.
Pixels are missing.
Unicode 2.0
The same goes for Katerina.
He didn't tell me.
Fairfax HD is a good example.
Dylan's Amazing Math / Math of Soul II
Unlimited bets up to 1.3
Electronic Data Compliance/Fiji
symbolic element
8000: Exhibition
10K:X etc
contact us
This is what happened to Katrian.
He didn't tell me.
Fairfax HD is a good example.
Unsupported personalities
New r/graphics: 1.
Have fun and good luck!
This is a clone of InfiniNikiFanStruct2023 MaxInspired by Briem Script.
I am very proud and happy that I have been awarded a staff pick starfish. ⭐️
Arabic is basic, only Arabic and Urdu are supported. Alternate samvat forms for 2, 3, and 5 digit years are in PUA. If you wanna remove the notch in the U+16AEC, then use U+E000.
Only lowercase Georgian mkhedruli is supported.
My ratings dropped from 9.10 to 8.57??? omg these trolls are ANNOYING
@AFontAbove No, this is Patrick.
Clone of Sterile Timid by Riccard0, enhanced with some central euroupean glyphs, cyrilic and improvised greek.
This is a clone of Sterile Timid r0.3VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESMy little personal and humble tribute to our Astonishing FontStruct on its 16th birthday, full of admiration and respect for the Great Creator & Big Chief Rob Meek and all fontstructors, big and small, who used it during these amazing years! LONG LIVE FONTSTRUCT!!!
Aaaaaaaaaaaaaaaaaaaa!
This is a clone of zhyghosts eYe/FSSince I could not find "non-eroded" version of a source font that I like a lot, I decided to make my own clone. When at it I tweaked some letters (A, K, W, Y, 5) to my liking and left the lowercase as variations. Also added few letters with diacritics from my region.
This is a clone of zeeglo eYe/FSjust a cool widened font: the first of 64 cunningly cloned special fonts designed at different grid scales (in this case, it uses 1 to 2)
This is a clone of fs excaliburSimple scrape optical experiment with eroded characters. You can find a lowercase "c" in the "¢" glyph and "ff" and "tt" ligatures placed in the "fi", "ff" and "fl", if you need any of them. Suggestions to improve the font are welcome. Hope you like them.
This is a cloneExpanded version of Structurosa font with support of Uppercase and several more glyphs
Some changes include:
- Addition of Dots on small I and J
- Addition of stroke on 0 to distinguish it from O
- Glyphs with Cedilla have unified cedilla mark
Original font by @pauldhunt. Script and Bold Script letters come from Structurosa Script and Structurosa Script Heavy fontstructions by pauldhunt respectively
This is a clone of Structurosarecovered from past work + expansion.
finally! after N years! i can delete those unholy drafts from my graphing calculator. obviously the normal, correct way to use up battery power during self-study
rest in peace to one entire screen of drafts i overwrote by accident at some point
BOUWHUIS - 'Bauhaus'-modernism inspired minimalist geometric sans
════════════════════════════════
I am in a Bauhaus-vibe last couple of day..
So here is yet another venture into the modernist minimalism aesthetics of the previous century.
════════════════════════════════
This Font losely draws on the basic concept for the 'Universal Type' that was originally designed by Bauhaus student Herbert Bayer.
It's basically a hugely inspired tribute to Herbert Bayer's several forms of ―'Universal'.
But I want to be clear on the fact that this isn't a revival of the original alphabet or anything along those lines for that matter.
Instead it is a intermingling personal interpretation of his multiple works and ideas. Attempting to merge this recollection of Bayer's rational 'functionalist'-approach towards combining aesthetics and function, as by which he is answering to the 'Bauhaus'-philosophy and the 'Form follows function'― design principle.
But besides being a 'inspired' recollection, still the main focus for this FontStruction was to come up with this personalized and stylistic derivative version that pays homage to various of his original work. Unifying the various characteristic Bayer idea's-n-bits within my personal visual representation of the general concept into a new piece.
For it's primary style-concept I envisioned BOUWHUIS being something fresh and somewhat different from the gross majority of similar inspired works out there. This led to the decision for going with a more contemporary and modernized (― as oposed to modernist) style lettering.
In addition to that I pursued a much more vibrant and nuanced typographers sensitivity towards letterform calligraphy and decorative features.
Strong geometric core elements of the font make up for a expressive simplistic structural basic form and it has 'zero' stroke modulation for thickness.
It's regular weight combined with that predominant circular and square-based geometry of the letterforms result in this 'open', and overall ventilated characteristic of the design.
The typical crude appearance that usually comes with a strong geometric sans like this was compensated for in BOUWHUIS by the design's subtle deviations in form and the various decorative calligraphic letter-components.
Something that completely denied Bayer's principle in approach to modern typography and to create an "idealist typeface" was; The reintroduction of it's uppercase letters.
Part of Bayer's rationale was to simplify typesetting, strip all that he felt was unnecessary or the typeface had no need for in order to function, till there was not much more left than just the nearly bare-naked form.
It seems that unintentionally some innuendo of Art-Deco―flavoured hints also found their way into parts of this design.... ―Hmmmz
― but I think I like them, so no worries on behalf of that
════════════════════════════════
As a little bonus topping it all off there is also a super tiny experimental lowercase caracter-set (X-Height=1 grid unit)
Located in the Unicode block for "Halfwidth and fullwidth forms"
I hope y'all like it so far, more will follow soon.
Cheers
See more:
https://fontstruct.com/fontstructions/show/1804040/zimpleza-eye-fs-1
https://fontstruct.com/fontstructions/show/2014530/pix-sans-finished-3
This is a clone of zabbatek eYe/FSCredits to: @elmoynique for the font.
This is a clone of zikiya eYe/FSGr4ftY presents:
Bolden
Just a simple bold font.
feel free to give critique, as long as you have something helpful to say.
i would especially appriciate help with the greek.
thanks:
to @Kiên Trung for helping with the Υ
to @elmoyenique for helping with the y
to @Sed4tives for a bunch of bits and bobs here and there (c, t, and n, to name a few)
additional info:
X height: 5
Cap height: 8
letter width: 5
Filters: 2x2