Searching for more “Geometric” fonts?
Buy and download “Geometric” fonts at MyFonts.
DALLIANCE GROTESK — Geometric gothic grotesque
═══════════════════════════════════
Dalliance Grotesk is a solid sans-serif lettering concept that builds on the ‘core’-lettering concept of frongile's amazing work called Liaison Grotesk
Liaison is a renegade take on the gothic grotesque sans-serif style. A wonderful mix of early egyptian styles that get blended with subtle neo-grotesque hints, held firmly together by a rigid condensed geometric letter-backbone. The crude design of Liaison provides a very distinctive and unpolished appearance, that breaths a lot of visual character.
Its geometric quirkiness and rather irregular letter widths, just the slight imperfect overall lettering simply came together perfectly in frongile's original design. Making this a text-book example as for whyback in the day this style became known as ‘Grotesque’.
Yes, Ugly.. Obnoxious.. and... ‘Always in your face’
— Exactly how we like them best...
Dalliance Grotesk is the result of harvesting some of that original soul personality as was seen in Liaison and borrows it for extrapolation into a different font.
While Dalliance tried to preserve much of the overall letter-backbone structures from the original source, its primary aim was, to push towards a more polished finishing touch.
Simplified letters that were stripped of most quirks and bits, keeping only their rough shape intact.
In addition, all curved letter-parts were fully re-build with smoother contours and more natural flowing curve transitions. The spurred top and bottom stroke-stops for the lower-case letters had been changed so that the top now slightly differ from the bottom spurs (different tapered angle). Also the top spurs all have been slightly lowered to make them sit a tad bit bellow the x-height of the font.
Main modification revolved more or less around achieving cleaner overall text rendering and better optimization for body copy in small point sizes. In the process of getting there, I carefully adapted each glyph equipped fit, to appropriately accommodate all the ty(pro)graphic goodness one can possibly hope to pull out of a Fontstruct.
Smooth (near)-Bézier contour quality, optical compensating correction adjustments, such as overshoots, small vertical stressed contrast and improved stroke joints. Also the font's proportions for height to weight ratio has drastically changed.
— Utilizing sort-of an attenuate 'knockoff' to frongile's original concept for his Liaison Grotesk.
I would like to thank him for allowing me to harvest the basis of his lettering-concept and letting me re-use that as the stylistic back-bone in the creation of my own font.
TEFlonALuminium — A contemporary geometric sans-serif
═══════════════════════════════════
Inspired by the brand logo for French kitchen and home appliances company 'Tefal'.
The font is an extrapolation from the five letters that make up the original logo. I have made some small changes to certain characters to make them more suitable for a full font and body copy text format.
I hope you like it..
Cheers
This is a cloneVON NEUHAUS — Geometric “Bauhaus”-inspired style
═══════════════════════════════════
This is the latest evolution of a “Bauhaus”-inspired constructivist style typeface design that originally started 5 years, or two font versions back.
To me personally this is a long awaited triumph, that has finally materialized after years worth of been haunted by this idea, and the crazy speculations about this ghost that would never be...
Well, that was untill now... So at last, I can now finally proudly present to you this latest of arrivals to come from this unforeseen series of typeface progressions.
This newborn addition is in fact the 3rd phase of this letter concept's evolution, and caused the font project to undergo a series of addaptations that graduatelly increasing the levels of sophistication possible by chaging it's internal structure and behaviour within the FontStruct-editor. This 3rd addaptation unlocks the FontStruct editor's “Expert Mode” full power potential.
Enabling all editor functionallity to provide the most versatile font creation capabilities available within FontStruct.
STF_BLAUHAUS was the font's very first version, created back in early 2019. It's the font's original concept as it innitially was first intended. It essentially started out as a personal study into the design of letters on a small grid. And more importantly, the creation of required composite bricks to do so.
The idea back then was to craft the most complex geometry possible without the use of any “Expert Mode” functionality whatsoever. Now, what this innitially did was still quite novel to me at that time, as this had led to the development of a FontStruction that was solely built from the extensive use of composite bricks. Not just a couple, but a staggering 272 composite bricks in total. Many of which in fact are quite intuitive and required certain amounts of careful thinkering with the maths found in it's geomtry to craft these custom brick compositions.
So as explained above, there was no use of any of FontStruct's “Expert Mode” functions. This meant that the option to nudge, flip or rotate any of the bricks wasn't available. Now this changes everything in respect to building complex fonts, since in order to get all the bits and pieces of a letter such as: crossbars, intersections, curves and corners properly aligned requires, a precisly fitting composite brick to be tailor-made. In terms of the FontStruct limitations, this cause the physical properties of FontStruct's brick composition tool to be fundamental as to how much complexity and refinement can be put into it's letter geometry. In other words this is fundamental as to how well crafted the design is going to look in the end, since there is no option to further manicure shape or form other than from within those bounds of the adjacent 16-brick-array grid squares of a selection for composition.
I've choosen to design the alphabet concept in this “Bauhaus”-inspired geometric style, simply because of the simplicity this style has in terms of its basic pure geometric forms. The final result became this simple and bold looking small grif display type with a “3-bricks” Em-size only.
but it had some crucial compromises that had to be made due to FontStruct's design limitations. Not terrible, but not quite perfect either.
One very important byproduct from this limitations as were described above was a huge collection of very intuitive custom brick compositions that offer seemless alignement and perfect fits, basically an extensive set of custom bricks that work in a very similar fashion as FontStruct's default “Connect” bricks.
Bringing us to the main reason for 2022's version of this font.
STF_BLAUHAUS (Plus) was the font's second version, and most recent state that it sat in for the last year, up till this now. In this 2022 version of the of this font design modification the FontStruct editor's “Expert Mode” functionality was introduced into the design. Hoping to further manicure some of these compromised critical area's in an attempt to see what refinements could be implemented to revise the 2019's original version.
Now that the option to nudge, flip or rotate bricks was available, new more complex geometric shapes suddenly became possible. This sparked an explosion of new characters and additional alternative forms. Although now the FontStruct editor got vastly more versatile and potent, it remained strongly limited by that still present 1:1 brick size filter setting. Nevertheless, this made possible a very substantial update of the older font, and allowed many new shaping capabilities.
STF_VON NEUHAUS is the 3rd and final evolition to have come from my earlier FontStruct endeavours; STF_BLAUHAUS and STF_BLAUHAUS (Plus)
This version basically saw the transition from a font only using 1:1 brick size filter into a font at 2:2 brick size filter settings to unlock all power potential of the FontStruct editor's “Expert Mode” functions.
I could now write another eqyually as long body of text, explaining what's new in this final version or which other improvements were made, or say about it whatever the hell I want, but I figure that the picture becomes even more apparent when simply comparing the 3 fonts from old to new, and see the evolution happening before your eyes.
Start with STF_BLAUHAUS, folowed by STF_BLAUHAUS (Plus), and witness the full glory of "next-level" FontStructing that made possible the last version STF_VON NEUHAUS.
I hope you like it,
Cheers
This is a clone of STF_BLAUHAUS (Plus)Art-Day-Co. — Decorative geometric futurist sans
═══════════════════════════════════
A more experimental and fururistic take on a standard geometric grotesque that started out as "All-Caps" lettering concept. The innitial first idea was to create capital letters only and to provide these with additional capital letter alternate forms, Now, things not always go as they were invisioned, as was the case during this project..
After creating a couple of capital letters, and just when I was thinking I had this new brainchild for a cool looking font, I ren out of ideas for more experimental letter solutions; — Inspiration dried up quicker than water droplets evaporate on the surface of the sun!
But honestly imo things especially got interresting when I unintentionally started doodling lowercase letters for this font. And I don't know what happeded here, but it somehow completely changed the mood of this font (To understand what I mean just cross-compare 2 lines of text, one with all lowercase text and the other all caps text).
Both somewhat very different, but mixing effortlessly to create a very distinct and unique looking font. I can't put my finger to it as to what style it is.
Cheers
BATAVIER (Pro) — Geometric display sans
═══════════════════════════════════
[ MEMOIR ]
Revision / revival of the geometric lettering seen on a 1916 Dutch litho poster for the Wm H. Müller & Co.'sRotterdam-London passenger service called Batavier-Line(Batavier-Lijn in Dutch) which was originally designed by Bart van der Leck(1876 - 1958).
The Batavier Line existed from 1830-1960, and was the oldest steam shipping line in The Netherlands.
[ UPDATE INTEL ]
A couple of small changes were implemented compared to v/d Leck's original lettering. Most significant is the upscaled Ampersand, but numerous other small cosmetic or optimizing modifications were made as well.
I completed the full alphabet plus numerals and included additional symbols and punctuation marks to make it a fully functional typeface. The lettering is all caps (majescule) only. Some lowercase letter locations harbour a glyph alternate uppercase form as could be seen in the original litho poster source. Another bunch of alternate uppercase forms and underlined “superior” small capital letters were located in the “Halfwidth And Fullwidth Forms” Unicode block. In addition to that it has accented Latin letters for multilingual support. Also two resized alternate forms for the Ampersand and two stylish ligatures have been included.
[ SUMMARY ]
This is actually the second revision I did for the litho lettering by v/d Leck. The first attempt was made using a (faux-) Bézier approach, resulting in a huge grid canvas (168 grid units / bricks tall monstrosity). This made it a lot of hard work to build and for some letters impossible to properly implement kerning since FS values only allows min. -10 / max. 10 of grid units for kerning.
As part of the endeavor to refurbish some of my older FontStructions STF BATAVIER was one of those that was in serious need of some overhauling as well. The problem it presented was the font's cap-height. It was actually so tall and impractical to work and / or modify, that the first revival attempt never really fully materialized beyond a basic character set.
A full glyph only fitted on screen with the FS-editor zoomed-out max. and my browser zoomed-out at 30%. At this scale not only the canvas grid lines in FS's editor all but dissapeared, but it also resulted in a down-sized brick (or 1 square grid unit) with on-screen rendering at only 3×3 pixels, as oposed to 64×64 pixels with the FS-editor's default zoom settings.
So imagine selecting a tiny 3×3 px speck when working the glyph canvas at brick level to modify glyphs... pretty much impossible. Now, the other situation wasn't a whole lot better. This had the browser's zoom restored back to 100%, making the glyph canvas at brick level “workable” again. But in respect to the cap-height this only renders a very small section of the glyph on-screen. Requiring a huge deal of additional canvas navigation in FS's canvas editor, better known as “Pan the view (H)”, which is done with the hand tool.
And well, as many of you will know, this is an absolute bummer When navigating (or panning) a glyph bottom to top requires 3 full canvas swipes.
So yeah, the only way for an extended version ever to materialize was to be rebuild it from the ground up at a much small scale, using very different measurement ratios compatible with FontStruct's kerning.
[ TECH INTEL ]
This second revision attempt successfully reduced the font's cap-height down to a comfortable 5 bricks (or grid units) tall and Em-square of 7 bricks total. Some optical compensations were implemented to certain elements such as stroke weight corrections and careful minute differences in vertical positioning of letter mid-section elements.
For now thats all Folks..
Cheers
SEADWELLERS — 1920s Art-Deco Sans style
═══════════════════════════════════
I was somewhat inspired to do a Art-Deco style lettering of my own after seeing the stylish Art-Deco flavored FontStruction Aquamarine by IronClaws
Other than that the two fonts remain unrelated and Seadwellers poses no resemblance to Aquamarine. Instead I sort of did a 1920s Art-Deco style lettering with thin geometric letterforms. It's comes as a Majuscule only and the letters have nice quirky width variations, with some letters appearing almost extended, while others are more narrow.
— The similar aqua-themed concept is merely coincidental.
Only basic character set!
It remains a WIP for now..
Cheers
DAN NIET — Futuristic rounded sans
═══════════════════════════════════
This is a recreation of Svetoslav Simov's Dan typeface that was published by Fontfabric back in 2010.
A while ago I came across some image that used this cool futuristic geometric sans. And without first doing proper research I started to FontStruct the lettering seen in the image. Once those were completed I didn't really had a good vision on where to lead the rest of the letter inventions, so I went looking online to find something similar that perhaps could get me inspired to complete it after all.
Scouring the web for a while I stumbled upon some sample images for a typeface called DAN by Svetoslav Simov. And it was unmistakably the font seen in the initial image that I used for the first couple of letters.
Now, I could've abandoned the project at this stage and take my loss, but I felt that the work that already had been done up to this point would be a sad waste of something that was actually kind of fun to make. So for this reason I decided to go ahead and continue the project, and instead this time the focus shifted towards recreating the original DAN typeface.
I included a number of small changed to certain letterforms to suite my personal preference better, but it very much remains Svetoslav's work.
Because the original DAN typeface is a commercial product this recreation won't be made available for downloading. It was strictly made for the fun of it, with no intent to redistribute. It was published solely as a showcase of the FontStruct editor's capabilities.
I dubbed the project DAN NIET which is Dutch forTHEN DON'T.
This sort of as a wordplay to the original's name and it's off-limit legally restricted status, hence the inclusion ofDON'T.
— It still remains a WIP..
═══════════════════════════════════
DISCLAIMER:I hereby state that I do not own the rights to this, and all rights belong to it's original owner. Credits for the original lettering concept go to the creator. No Copyright Infringement Intended.
Cheers
VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESBUISJES — Geometric outlined sans-serif design
════════════════════════════════════
[ INTRODUCTION ]
While at first I was just updating one of my custom brick tool sets with some additional new pre-build custom composite bricks which seemlessly fit and allign with the dimensions of FontStruct's default connection brick set, the font more or less materialized as this happy accident while I was fooling around and constructed several basic letterforms and shapes for testing these composite brick solutions I was making.
Before realizing it I had about half-a-alphabet's worth of random letter doodles. From there on out I simply decided to copy the letters that came from this test run and drop them into a new FontStruct project and just resumed building the remainder of what would later become this rather modernist clean looking geometric outline sans.
Now, keep in mind that working with the constraints of these (largely 'Composite'-like) and somewhat oddball physically natured 'Connection'-bricks is very limited, and can be quite tricky. They simply doesn't allow the same level of design freedom FS's 'Core'-bricks do (E.g. the centre allignement, their thickness and that 30-bricks-only limited palette size for each of the three variations). To acquire some of that more distinctive and specific tailor made geometry usually requires clever brick arrangements that consist from a mixture of both multi-stacked-composites and brick overlaps to patch gaps and smoothen curve contours.
This process can sometimes become very 'trial / error' -based and unpredictable when complexity increases. Distracting at times, as it gets in the way of primary objectives. To constantly having to invent different new solutions that work simply doesn't help creative workflow. Therefor I decided to dive a little deeper into expanding my pre-fabricated'ready-to-use' composite brick palette.
[ ANALYTICS ]
So far I'm very pleased with the final result, especially with how easy this new set of custom brick composites turn out to create new letters. The bricks feel very intuitive to work with, and unlock quick access to greater sophistication and shaping of more complex geometry. Opening up several new possibilities that are impossible to construct solely from the default 'Connection' -brick palette. So having them at my disposal in a pre-fab fashion is certainly gonna help streamline the workflow.
[ THE FONT ]
As far as for the font's aesthetica, there isn't all that much spectacular going on really. The basic geometry provides a rigid solid looking lettering that produces this fairly legible text. The modern yet clean characteristics making it the perfect match for a broad range application.
• Multi-Lingual (105 languages supported)
• Some glyph alternate forms
• Kerning (1922 stored pairs)
The font name refers to its tubular characteristics and comes from the Dutch word Buizen, which literally translate to Tubes in English.
I hope you like it,
Cheers
This is a cloneFRUNTSTOCT UPPER — FontStruct logotype uppercase reinvention
═══════════════════════════════════
This second font is the next evolution in my take on the Fontstruct logo type.
Its an experimental approach towards the reinvention of its uppercase letters. The first one was a unicase minuscule that was aimed at creating an improved version of the original logo lettering concept. FRUNTSTOCT LOWERremained faithful to the original letters, whereas FRUNTSTOCT UPPER is a complete reimagining.
Motivation behind the complete overhaul came after checking out existing Structurosa entries by other Fontstruct members.
It became evident that only one or two members truly were able to build upon its original concept and could come up with a 'unique' and decent majuscule.
AT Archistruct Outline by Kassymkulov (aka Architaraz) being the clear winner in my opinion. — Which is a true masterpiece !!
Some others 'tried' to be original, and made an attempt at a personalized lettering, but couldn't solidify ideas into a consistent whole. But the majority simply copied rob's original design.
— For that reason I choose to take the alternative road and tried to come up with something new.
I hope you like it..
Cheers
FRUNTSTOCT — FontStruct logotype reinterpretation
═══════════════════════════════════
For all ya failed attempts at re-creating the FontStruct logo typeface.
Many have tried their take on it, most without convincing succes, and often looking downright horrible.
Two of the most commonly made mistakes are.. 1) The introduction of a uppercase alphabet 2) Having a tendency for including far too many stuff in terms of extended language and typographic support, aiming for large multi-lingual character-sets with as many glyphs possible.
The lettering for the FS-logotype has this very distinctive modular geometric stencil concept. The underlying glyph structure consists of 5 horizontal rectangular segments, that together with a custom set of simple geometric blocks form a modular system that can be easily re-modeled or re-arranged to form the different letters and required parts that help to distinguish each individual letter from one another.
The modular system itself is highly simplified and easily accessible to implement additional changes. But typically speaking a simplified modular system comes at a price. And the further a system was simplified, the greater the amount of limitations will be. Which literally translates to a reduction in overall design depth and freedom to implement a more diverse complexity.
—TECHNICAL SPECS:
[Dimensions] Segments
X-Height — 3
Cap-Height — 4
Ascender — 1
Descender — 1
[Filters] Value
Horizontal Brick Size — 2
Vertical Brick Size — 1.8
Horizontal Grid Scale — 0.9
Vertical Grid Scale — 1
In case of this FS-logotype concept, there are a number of key components that put in place this very strict window of parameter-locked propperties, that exclude all but a few remaining options which could still be exploited, and therefor fully dictate whatever is, or is not possible.
Having only 5 segments, limited geometric components and highly restrictive rearrangeable capabilities towards implementing variation all adding up to the difficulty-level for extrapolating some of its more complex and- / or denser forms, symbols accents and puntuation marks.
To cramp excessive amounts of complexity into a very narrow band of realestate would have a certain negative wear on its aesthetic qualities. And is likely to result in a combination of messy glyph composites and queer-looking letter-inventions, contrapped in a mish-mash of irregular and gawky looking, at times even disfiguring geometry that sit at the heart of this problem.
This is exactly where those bad choices can either make or break your font. The modular system for FS's lettering clearly isn't the most suitable of fonts for uppercase forms and complex geometry.
This doesn't mean that it is impossible, as was demonstrated by a small number of re-interpretations that actually do include fairly decent uppercase inventions. One of such that have successfully pulled off the inclusion of a uppercase set for his rework of the logo typeface was Zhalgas Kassymkulov—previously known as architaraz.
His attempt is a beautiful display of craftmanship and clever simplicity.
Here is a list of attempts that I think are successful re-interpretations of the original FontStruct logo:
Structurosa Italic — by four
AT Archistruct Outline — by kassymkulov
Structurosa— by pauldhunt
FS Logotype — by WeDoFonts
pixelstructia — by gamesgames
fs Colophon — by user-juli
fs sanstruct — by ETHproductions
Realised — by thezenmaster1000
Structurosa Bold — by pauldhunt
FontStrukt 2 Soft — by Jamie Place (FontBlast)
Structurosa Bold Too — by pauldhunt
— WHUTZINSIDE THIS FRUNTSTOCTION?
Now, a extensive explanation for the decision to not include uppercase forms to the font, as well as for the constraint on total character amount had been broadly covered above. I think that small caps numeral figures make a much more sleek looking glyph, and tying the overall character set much more together as a whole.
Another, and I say, rather more unique feature found in my version of the lettering is only a subtle one in fact. One that mostly works invisibly, that without the awareness of the reader, is easily missed. And can only truly visually materialize and appreciated seen up close. This is the implementation of several slight deviations and custom sculpting of certain curvatures and round features. Introducing an ever so slightly more diverse dynamic, but also taps deeper into some of that shape contrast propperties.
In addition to that I've also included several glyph alternative forms and small number of ligatures to play around with.
among these glyph alternates there is also this continuous string of 13 rather experimental looking glyph variations for the lowercase letter 's'.
These aren't actually meant to be usable characters, but instead is a collage of different configurations that make various curved geometry, and are simply stored in a glyph-style fashion that provides an actual physical estimation on their appearence and for me to test their functional values in a text format.
So far so good,
I am happy with how the font turned out to be, it is fairly consistent looking and still remains quite usable as a font.
That's all for now folks...
Cheers.
JS-SANS ROUNDED ― Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer. This time I did a revision based on a alphabet system Schrofer originally created somewhere during the late 1960s.
Its a simple, yet solid and clean looking geometric sans-serif style with medium contrast on its vertical axis. The alphabet as it originally was created by Schrofer featured a Lowercase (A-Z) character set with Small Caps figures (numerals) only, no symbols or punctuation marks were included.
This particular lettering was used in many of his work, such as book designs, brochure and post-stamps, so there is no shortage of resource material on the internet for this alphabet system. Over the course of its existence it was constantly evolving, and Schrofer kept expanding the alphabet system with additional new weights and slight variations. But during his time with Mouton & Co. the concept basics for this sans system became one of his workhorse letterings, and saw widespread application, with appearances dating back as early as 1968, when Schrofer developed the designs for the 1969 Dutch post-stamp.
I've already done a revival for this alphabet back in 2018. This was during my first year of joining FontStruct, so therefore the first revival attempt now seems more like an insult to Schrofer's brilliance rahter than a tribute.
Pointing out some of the flaws present in the old recap:
Certain key design characteristics weren't extrapolated properly throughout all of the required letters or were missing completely (imo. this is one aspect of a font revival the designer at least has to do right). Its Uppercase forms looked as if they did actually belong to another font all together, back then no additional Lining figures were included that would suit the newly added Uppercase letters, and only a handful of very poorly crafted symbols and punctuation marks was included. As a matter of fact, it was only just the second Schrofer work I ever digitalized. So yeah...
— Now five years later the time had arrived for the rematch.
And this time I wasn't going to enter the tekken as the new farmhand or a lazy dog. But came well prepared to battle that grumpy wizard as a quick brown fox. Five boxing muscles flexed and sufficient toxic brews at hand, but above all.. A postgraduate academic with a Master's degree in "DIY FontStructivism" at the university of Home. So there weren't many very exquisite codfish eggs to judge my fizzy vow. Jack proved strong, but picking only six quinces, unable to quickly fax Judge Pat, he eventually been left a puzzled women, and so I jumped jewels when I was crowned the Sphinx's evil Queen Fredericka.
— I think that is summarizing it all very neatly.
But, just in (lower), case, here is a "Give me Gum-Gum-" explanation for all you rocket scientists among us:
For this revision I only used Schrofer's original red / white alphabet sample composition. Sticking with just one resource made sure I kept a non-biased vision for extrapolating the remainder of the character set. This simply because shear amount of variations that Schrofer had contributed to this alphabet system would make it difficult to consistently combine everything into one complete work.
I reproduced and included all Schrofer's lowercase characters and numerals as were shown in his original composition. From that point out I designed the rest of the font myself as faithful I possibly could. Yet in the end two major change were made to my recap in relation to Schrofer's original that aren't typically very desirable in a revival and therefore not recommend when strictly aiming at reviving a original work, but in the case of this Schrofer alphabet in terms of how it was provided by himself it was rather wisdom than that it was madness.
Let me explain what changes were made and what effect they have in terms of to what extend it deviates away from technically speaking still classifying as a revival. First of all, his original Lowercase letter f is very interruptive in a line of text. Up to a point that is really taking a toll on its overall aesthetics. So I modified the original ever so slighty, basically all I did was decreasing the length of the horizontal crossbar a tad bit so that it would allow additional kerning for the character to eliminate the issue it innitially created. I relocated Schrofers original form into the Full Width Unicode block as alternative form.
The other major change was essentially the complete redesign of numerals forms. I replaced Schrofer's original Small Caps figures with a new set of newly designed Lining figures to be the font's default figures, making the default text figures a far better match for the newly introduced Uppercase alphabet letters. Schrofers Small Caps forms are still in there, but now relocated to the Full Width Unicode block as glyph alternative forms as well.
Both of which affect the font's innitial physical appearance, but thanks to some rearranging of segments within the character set neither will have effect on the reviving part of the project, since all of Schrofer's original letterforms are still included and available for use. But this was done to bring a certain level of harmony and logic to the piece from a typeface-standard perspective. So technically this would classify SANS ROUNDED as revision and not a revival. Which to the broader sense is correct. But it also still technically could be used to function as a revival. So perhaps it could be both at the same time?
Than in addition to that I also provided a small number of glyph alternative forms that are located in both the Full Width and Private Use Area 1 Unicode blocks.
Extra alternative glyph forms are:
⮻ acefgjrstVvyz
⮻ 4× experimental lowercase letter 'g' alternate forms
⮻ small latin letter 'Eth'
I hope you like it,
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAATfor the full catalog of fonts I contributed to this project so far.
Cheers
This is a cloneVAN NELLE (Blueprint) — Geometric modernist sans
═══════════════════════════════════
☛ THE SOURCE
A re-interpretation of the 1926 geometric sans serif alphabet system reproduction by Jacob Jongert, published in a 1930 sourcebook by N.J. van de Vecht. The geometric uppercase set of the alphabet system is what would later become the famous sans serif capitals which he used for lettering throughout many of his Van Nelle materials.
☛ THE FONTSTRUCTION
Attempt at making a convincing recap of the original alphabet by Jacob Jongert as it was shown in the 1930s sourcebook, and extrapolate that into a full functional font. The decision to go with a small grid sparked a number of limitations in terms of the design freedom that forced some inevitable changes. But the general idea sort of became not to make it a revival, but rather more or less a faithful revision. One that would still be instantly recognizable yet didn't necessarily had to be all about accuracy.
☛ —The small grid design made sure this wasn't happening anyway!
But, for instance, the most striking difference between the two fonts (their weight) in fact is such a byproduct for one of those limitations. Something FS's small grid couldn't properly reproduce, so VAN NELLE (Blueprint) has a slight stronger weight, making the font somewhat of a bold style version of the original. This in addition provided me with slight extra freedom to inplement a little personal touch for further manicure of the font's finer details. Which allowed me to cope with some of the optical clunkiness that come with a fatter face and the grid based design.
Besides these circumstantial differences, which were basically beyond my control, I've also made some intentional changes to make the typeface more practical to use. The changes include things like the significantly lowered ascender height, the slight different width for certain letters, larger tittle (dot above i, j & ij), and several more. despite these changes I believe it very much still reflects what Jongerts once invisioned for the system.
☛ SOME NOTES ON THE ORIGINAL AND ITS CREATOR
Jacob Jongert(1883-1942) was a advertising designer from the Netherlands. After varied studies, including being Roland Holst’s assistant and an acquaintance and colleague of S. H. de Roos [who brought the Arts & Crafts ideas of William Morris to the Netherlands and devoted his career to book design and typography] with whom Jongert experimented with several printing techniques and discovered graphic design as his ideal art form.
¶ In 1923 Jongert rolled in a unique and long-term collaboration with the Van Nelle company, where he became head designer, a position he held until 1940. The Van Nelle company had an extremely modern approach towards advertising (they even commissioned Cassandre to do a poster) and Jongert created for the firm a recognizable image with clear shapes, powerful letters and primary colours, totally Dutch avant-garde in style, and with a strict and rigorous approach directly linked to De Stijl principles. The corporate identity he created has become a milestone in the design world.
¶ The lettering, however, is the driving force that ties it all together. The style is a straightforward set of plain, mono-linear, sans serif capitals in a style that just started to come into fashion in the late 1920s, early 1930s with the rise of functionalism and geometric type design. Yet, while these ideas were already thrown out there, its clever simplicity plus the systematic and cohesive way Jongert implemented his lettering was unusual at the time. The square and minimal construction of the forms allowed the letters to contract and expand to fit any situation, yet maintain a consistent and recognizable appearance throughout the Van Nelle line. ¶ Something we only recently have learned to appreciate is to see his hand crafted system amid the current advancements in variable-font technology, which offers a similar kind of flexibility to typeface designs. A quality that certainly placed him well ahead of its time.
What I particulary like about Jongert's original is the stuff that is going on in the lowercase set of the alphabet, which are those quirky lowercase letter inventions that are different from the more traditional modernist sans, but sadly the lowercase letters were pretty much never used in his works.
I created a simple PDF typeface specimen for those who want to see the high-resolution preview.
PDF SPECIMEN WAS DELETED
Thats all Folks ☚
☛ Cheers
GEO-PROTESQUE - Geometric grotesque typeface
═══════════════════════════════════
This time I did an attempt at making a typical super rounded geometric gothic grotesque "workhorse" typeface. A sans serif style that is a very popular for headline and display text.
The idea for "Geo-Protesque" was to make a sans serif style that is strongly inspired by the pre- "International Typographic Style" -era. To dive deeper into a more decorative period of hand-lettering, pioneered mostly by architects and painters.
The most important difference as oposed to today's more traditional type design, is that during tose early days of the Modernism movement lettering usually was purpose made. Each letter had a unique role within a composition, making Lettering that was meant to be used in a unique configuration. These designs occasionally didn't even had full alphabets designed. And even more rarely getting manufactured and cast into full printing typefaces.
It was mainly inspired by those sans serifs seen in vintage sign paintings and show cards designs that often were more decorative artistic takes on the general basic stylistic concept of sans serif letters.
Although Geo-Protesque is essentially more of a contemporary looking design, I tried to incorporate some of that playfullness that came with these "free-form" sans serifs.
On the other hand this design sticks well within those realms where it remains faithful to simple geometric form. This created almost quirky looking letterwidth distribution in the upper set, and set somewhat of a funky rhythm. This gives the font a very strong early 1900's feel.
The lower case set has a much more uniform design that works well in a piece of body-copy text.
To pull this design off properly the font was created on a large grid using the 'faux'-Bézier approach. The rest just enfolded from there on out.
The design, (obviously) a very geometric grotesque, has some nice neo-grotesque features to it as well.
While many letters mostly have even stroke width, upclose you'll notice some stroke width variation is going on after all. This to bring more contrast into certain area's. Anther design feature is the font's generous and open letter-spacing.
The font is optimized for body copy in both digital and print use. Even at very small point sizes. In digital-display rendering it performs crisp even as low as 9pts. (Not bad I guess!)
Keep in mind that due to the nature in which 'faux'-Bézier curve fitting works this font might not be the best choice for a large size rendering. The linear interpolation method uses linear polynomials (straight lines) to construct glyph contours.
Beware that when using this font at very large point size rendering the remnants of this process will become visible!
Cheers
LEOPOLD PRO (Serif-Regular) — Modern geometric condensed slab-serif
════════════════════════════════════
This font is the second style instance for the newly launched "Leopold Pro" typeface family, and is kicking off this new family of fonts.
The first one came as a minimalist, geometric sans serif style, this second font adds a serif style variation to the family. Both the "sans-regular" and "serif-regular" styles have identical visual properties for size and weight to allow seamless combination of the two, and as the name already suggests, represent the "Regular" style for the family.
Motivation for this was to craft a slab-serif style for the original geometric letterforms that has strong antique mechanistic qualities to add somewhat of a typewriter characteristic.
The relaxed optical proportion, short unbracketed serifs and open spacing results in clean and pleasant to look at text. Largely thanks to these properties it is still relatively legible in terms of a slab-serif style.
The other style can be found here:
LEOPOLD PRO (Sans-Regular)
Two additional extra "Light" and "Bold" weight classess are also currently in development, both remain works in progress for now, but are expected to be included in the future.
I hope y'all like it so far,
Cheers
This is a clone of STF_LEOPOLD Pro (Sans-Regular)Fauxhaus — Geometric minimalist modernism sans-serif design
═══════════════════════════════════
[INSPIRATION]
As the name already suggests, this indeed was inspired by the Bauhaus-typograpy towards functionality style.
More specifically by Austrian artistic polymath Herbert Bayer's 1925 experimental "Universal" alphabet.
The alphabet he designed became somewhat synonymous with the school's identity, and probably is the most well known Bauhaus typeface, and truly epitomizing that typical simplified "Form follows function" Bauhaus-minimalism style. It was also used for the new Bauhaus-building signage.
Some key features in Bayer's original form are those easily recognizable geometric sans-serif letterings, with letter composition based on strong basic geometry, having eliminated all decorative elements of the letterform composition for that crisp industrial, slight mechanical minimalist aesthetic. Bayer's original Universal alphabet also eliminated the need for a upper case letter, further simplifying it towards more of a functionality-driven standardization. Bayer developed multiple revisions and variations of the alphabet. Sadly Universal was never cast as a font, as during that era they weren't manufactured into printing typefaces, and the designs would only exist as drafts (as was the case with all Bauhaus-typefaces). Nonetheless it served as a lettering model for Bauhaus students, colleagues, and followers alike, and they were regularly re-used for signs, book covers and publications by many of its members, but even beyond institution walls the typographic style began to gain a foothold. Throughout the years we have seen a multitude of revivals and other Bauhaus-inspired typeface designs. Some of which that try to be faithful digitizations of the original, whereas others taking a more artistic approach to the style by providing their own personalized reinterpretation of the Bauhaus-aesthetic. So even to this day, many decades later, it repeatedly continues to inspire and influence designers time and again.
Bayer, First a student and later junior master of the printing workshop, was one of Bauhaus’s most influential attendees, advocating the integration of all arts throughout his career. Though not trained as a typographer, he was also assigned with the task of creating a universal visual & typographic identity for the school.—a task Bayer took very serious.Sparking perhaps the most mythic typeface to ever come out of the Bauhaus, which is "Universal"—one that at that time strove to be as idealistic as the school itself
═══════════════════════════════════
[THE "FAUXHAUS" FONT]
This is an artistic reinterpretation of Bayer's "Universal" alphabet.
Aiming to preserve the unmistakable style and simplistic geometric stylistic properties of the original, while in the same time allowing a more 'free-form'-approach towards crafting the letterform compositions. This of-course as long as they remains in-line with the stylistic properties of the original. And for the lack of having a better explanation;
—To do sort-of a 'faithfully different' artist depiction of Bayer's original Universal alphabet.
Some notable differences made in Fauxhaus compared to Universal are the re-introduction of a upper case form and the slight de-simplification and inclusion of subtle decorative nuance.
In some cases I've choosen to compose certain specific characters to be more or less identical as to how Bayer originally intended them, whereas others may be entirely different looking. And for some characters have one or more alternative form as well. Some of which are more 'ad hoc'- compositions drawn as we went when new ideas popped up. But others were specifically created to preserve and / -or include certain distinctive and unmistakably identifiable letterforms from Bayer's original Universal alphabet.
Greek & Cyrillic characters included in Fauxhaus were solely added for my personal experimentation purpose only, and they serve 'zero' function as to additional language support of the font.
"Use at your very own risk"— as these could very easily be gone the very next update.
Each letterform was meticulously composed from a random collection of the various memories, which after some thirty Bauhaus-inspired and / -or -revival works including their respective 'shared' research I have accumulated over time for Bauhaus typography like Bayer's work.
No source reference image was used as guidance for creating this FontStruction, everything came straight from the knowledge I gathered from the many previous Bauhaus related projects I did.
So to draw solely from memory alone somewhat a convincing and reasonably similar personal reinterpretation of an original 'Bauhaus' typeface at this stage has gotten pretty easy for me.
For this project in particular I've choosen to construct the letterforms on a medium sized grid, using the linear interpolation 'faux'-Bézier method. So beware that when using this font at very large point size rendering the remnants of this process will become visible!
That's all for now, I hope you like it so far,
Cheers
This is a cloneDIDUDE (Regular) ― Contemporary Neo-classical "Didone" style serif
══════════════════════════════════
The idea revolved around the basic concept for 'Didone'-style typefaces.
A genre characterized by modern unornamented standard letterforms, which was very popular for general-purpose printing during the 19th century. DIDUDE is by no means an attempt to embarge on a quest trying to deliver a conceptual overhaul of this genre. Its main goal was to achieve greater simplicity, without sacrificing that traditional neo-classical personality. Instead of leaning towards the typically more 'Humanist'-influenced style with distinct stroke modulations and proportional forms, geometry and symmetry were introduced to design this more simplified take on the traditional historical style. It has been crafted with a structural logic of its own.
"Less human, more geometry.."A fusion of geometry and neo-classical elements that blends the past with the present.
━━━━━━━━━━━━━━━━━━━━━━━━━━
Main distinctive features for DIDUDE (Regular) are:
Unbracketed serifs, vertical orientation of weight axes with a strong contrast between thick and thin strokes, slightly squarish-shaped round characters and its emphasized business-like nature. So the majority of important characteristics that distinguish the neo-classical style have been incorporated.
Certain features that were implemented into DIDUDE's design are somewhat setting it apart from most other, more traditional typefaces in this genre, and most notable is the more relaxed contrast ratio that was choosen for this particular project.
Further personalizing touches were made to stroke endings and curve geometry, providing slight 'calligraphy'-inspired decorative variation with occasional spurs, breaks, curved finials and plain monolinear terminals.
Topping it all off with an ever so gentle height deviation that sparks a subtle rhythm to any line of text. Last but not least, most of the optical clunkiness was addressed and either corrected or compensated.
There is a large character set that includes a little bit of everything:
Basic latin character set, latin-1 supplement set, stylistic ligatures and glyph alternatives, punctuation marks, lining and non-lining text figures, roman numerals, (Partial) Greek and Cyrillic, also numerous non-lingual technical, mathematical and decorative stuff was included.
Only partially kerning for now and this remains a WIP.
Nonetheless, I hope y'all like it so far..
━━━━━━━━━━━━━━━━━━━━━━━━━━
Here is a link to the other font style in this typeface family:
STF DIDUDE (Condensed)
Cheers
This is a clone of STF_DIDUDE_(Condensed)STF GROOTESK Pro ― Contemporary geometric grotesque
═════════════════════════
A clean and geometric grotesque sans-serif typeface that is equipped with tons of extended professional editorial typographic features,
such as:
Multilingual support in 3 script writing systems for 113 languages, glyph alternative forms, stylistic ligatures, accents and punctuation marks, symbols, technical, ordinal, pictographs, additional dingbats.
15164 stored kerning-pair and many other professional features!
━━━━━━━━━━━━━━━━━━━━━━
[ TECHNICAL ]
■ Metrics(in square grid units)
5.0-Em / 0.5-Stroke
2.0 : 2.0-Brick Size Filter
Em-Square: 5.0
Cap-Height: 3.25
X-Height: 2.0
Ascent: 0.875
Descent: 1.0
Overshoots: 2 × 0.0625 Top/Bottom - (uppercase only)
━━━━━━━━━━━━━━━━━━━━━━
■ [ ADDITIONAL EXTRA IMPORTANT RELEASE NOTES ]
Previously published as a (non-Pro)-version with the same name.
But when that version eventually corrupted, it rendered it useless.
And after several repair attempts the innitial isolated "FS-editor" native
brick corruption eventually was fixed! But from this point onward all theFontStruct-generated-*.TTF-files downloaded from this particular FontStruction delivered a broken TrueType-font file, that upon its installation process resulted in having a error. Leaving me, or anyone for that matter who had downloaded it, unable to get it or its updates installed.
So after unsuccesfull struggling for a while I noticed that the cloned version didn't generate a broken *.TTF-file. So I decided to terminated the original FontStruction and delete it.
━━━━━━━━━━━━━━━━━━━━━━
■ [ DESIGN INFORMATION ]
The main inspiration came from those early to mid-20th century geometric grotesques, and visual environment of that era.
Although the characters were mostly geometrically constructed, and remain as close as possible to basic geometry, "STF GROOTESK Pro" includes a blend of stylish hints of hand-crafted lettering influences and intentional irregularities in order to tribute those classical geometric designs.
For extra additional emphasis the design tries to take advantage of a rather unusual vertical Uc>Lc proportion, with ascender parts of the 'Lc' characters sitting well bellow the cap-height, making the 'Uc' appear strikingly taller in comparison. Essentially providing the uppercase with a more "Condensed" feel. Some of the other characteristics of the design are it's sturdy and stylish yet clean presence, with little to no contrast, and it comes in bold style only. But to compensate for the lack of extra weight versions there was some serious time invested into additional testing and optimizing the entire typeface. So it is super well mastered and therefor extremely versatile.
That being said..
Looks can be deceptive at quick first glance, and this indeed might appear as being a very basic looking design. Even though this in fact is far from being just that other basic looking display sans, nor your next boring geometric grotesque!
From a FontStructor-perspective point-of-view I recommend to take a more ‘close-up’ view of the design's finer details. This creates a better understanding and greater appreciation for the extreme level of complexity that is present in both form and function.
Zooming-in on some of the letters would reveal the font's subtle, yet nuanced diversity of that 'previously' hidden underlying personal characteristics that usually remain invisible in text format at smaller point size. Now suddenly just its overall care for finer detail and overall quality within every bit of the design, the tons of custom shaping, stroke transitions and additional smoothing will gradually emerge as zoom levels get ever deeper. At its deepest level it will even shed some light on the surgical stuff that mostly works invisibly and without the awareness of its reader.
A display typeface at it's core, still it performs equally great in very small body-print text or web design application, as it does too in larger format for headings, ads or branding.
Thus providing, this very function efficient and reliable work-horse,
a truly genuine "one style fits all" typeface powerhouse.
And there its no question whether this could hand out "a 'one-punch' K.O." of a Headliner, thats obvious. But this unyielding bumpy behemoth just as well takes u for the long run, effortlessly telling you fascinating stories.
Especially well cared for optimized rendering on a computer display device, and deliver simple yet versatile seemless digital typeset material.
━━━━━━━━━━━━━━━━━━━━━━
■ [ SPECIAL NOTE ]
A big thanks and 50% of the design credits for the lowercase 's' go out to elmoyenique
━━━━━━━━━━━━━━━━━━━━━━
■ [ "Pro" VERSION EXTRA'S ]
The new "Pro" version update for GROOTESK utilizes several TrueType smart-font features and control characters to map two or more glyphs for combining glyph composition.
LEOPOLD PRO (Sans-Regular) — Modern geometric condensed sans
════════════════════════════════════
This is a minimalist, geometric sans serif font with medium contrast and a strong compressed look. The modern condensed forms make up an elegant and classy looking font.
The overall design is a mixture of contemporary design with antique inspired elements.
The other style can be found here:
LEOPOLD PRO (Serif-Regular)
Cheers
This is a cloneINNERCITY — Geometric future retro display grotesque
════════════════════════════════════
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
════════════════════════════════════
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
════════════════════════════════════
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
════════════════════════════════════
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheers
This is a cloneMAUHAUS ― Feline inspired type design
[ THE CREATIVE PROCESS ] ━━━━━━━━━━━━━━━
This font was made because I have a cat. I love my cat, and this delight of a friend obviously loves me back. In addition to all this love, I also love to craft fonts, my cat is not to very fond about this.. So she loves to craft all sort of drama to gain my attention. Wearing me down with her mere persistence. I'm not to very fond about this.. So I slab her in the tiny face and modulate the crap out of her, stressing that nifty lil' stalker-happy pleb untill she gets a stroke. Than I make gashing incisions to all her intersects, making a pet-stencil.
No cats were harmed while making this font, this is just how we roll.
And one might wonder what a apple is doing inside a cat-font?? I know, but dont worry, the cat isn't a vegi...
― Lena say's 'Mauwww..' to all fellow FontStructors
[ FINAL WORDS ] ━━━━━━━━━━━━━━━━━━━
I guess that didn't clarify the ins and outs of this design, thats too bad !!
All I can say is that this is once again another concept following in the footsteps of the 'Bauhaus'-minimalism style and philosophy. Since I was not done yet with this whole raging Bauhaus frenzy..
― Lena hopes that nobody likes this font so far...
Meow
BOUWHUIS - 'Bauhaus'-modernism inspired minimalist geometric sans
════════════════════════════════
I am in a Bauhaus-vibe last couple of day..
So here is yet another venture into the modernist minimalism aesthetics of the previous century.
════════════════════════════════
This Font losely draws on the basic concept for the 'Universal Type' that was originally designed by Bauhaus student Herbert Bayer.
It's basically a hugely inspired tribute to Herbert Bayer's several forms of ―'Universal'.
But I want to be clear on the fact that this isn't a revival of the original alphabet or anything along those lines for that matter.
Instead it is a intermingling personal interpretation of his multiple works and ideas. Attempting to merge this recollection of Bayer's rational 'functionalist'-approach towards combining aesthetics and function, as by which he is answering to the 'Bauhaus'-philosophy and the 'Form follows function'― design principle.
But besides being a 'inspired' recollection, still the main focus for this FontStruction was to come up with this personalized and stylistic derivative version that pays homage to various of his original work. Unifying the various characteristic Bayer idea's-n-bits within my personal visual representation of the general concept into a new piece.
For it's primary style-concept I envisioned BOUWHUIS being something fresh and somewhat different from the gross majority of similar inspired works out there. This led to the decision for going with a more contemporary and modernized (― as oposed to modernist) style lettering.
In addition to that I pursued a much more vibrant and nuanced typographers sensitivity towards letterform calligraphy and decorative features.
Strong geometric core elements of the font make up for a expressive simplistic structural basic form and it has 'zero' stroke modulation for thickness.
It's regular weight combined with that predominant circular and square-based geometry of the letterforms result in this 'open', and overall ventilated characteristic of the design.
The typical crude appearance that usually comes with a strong geometric sans like this was compensated for in BOUWHUIS by the design's subtle deviations in form and the various decorative calligraphic letter-components.
Something that completely denied Bayer's principle in approach to modern typography and to create an "idealist typeface" was; The reintroduction of it's uppercase letters.
Part of Bayer's rationale was to simplify typesetting, strip all that he felt was unnecessary or the typeface had no need for in order to function, till there was not much more left than just the nearly bare-naked form.
It seems that unintentionally some innuendo of Art-Deco―flavoured hints also found their way into parts of this design.... ―Hmmmz
― but I think I like them, so no worries on behalf of that
════════════════════════════════
As a little bonus topping it all off there is also a super tiny experimental lowercase caracter-set (X-Height=1 grid unit)
Located in the Unicode block for "Halfwidth and fullwidth forms"
I hope y'all like it so far, more will follow soon.
Cheers
STF ELEGANZA (Tall) ― Contemporary geometric humanist sans
══════════════════════════════════
A font style, that while simplified by old tradition, saw new light by modern sophistication.
It comes in a solid medium weight that is very suitable for body style text with good readability, but it does perfect clean headlines or ads as well.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The goal was to make a clean but somewhat more contemporary and playful take on a 'Grotesque' sans-style.
In an attempt to break away from the traditional trend of Grotesque type designs which evolved more around pure geometric shapes and aim for perfect circular, triangular or square shaped letterforms, that in return give many of them a somewhat harsch and featureless mechanical appearance, I choose to try and achieve the opposite, aiming for a softer, friendlier and more humanized feeling instead.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Dimensions: (in grid units)
X-Height: 2 .625
Cap-Height: 3 .125
Em: 3 .5
Brick Size filter: 2 : 2
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This is the 'Tall'-style in the 'ELEGANZA'typeface family. This version somewhat strays away from the other two variation instances. Whereas the other versions had a simplified look, this version aims for the oposite and has a much more rich and diverse typographic design. Countless subtle extra little details have been incorporated into the design. The tall and condensed style provides a luxurity look. The main purpose for this version was to provide another level of visual depth and flair into your layout.
Some of the main differences made in this 'Tall'-style are the more complex geometry, other X-Height to Cap-Height ratio, extra characters and the introduction of optical compensations.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The other style variations can be found here:
ELEGANZA (Tight)
ELEGANZA (Therapy)
I hope you like it...
This is a clone of STF_ELEGANZA (Tight)STF_ELEGANZA (Therapy) ―Contemporary geometric humanist sans
══════════════════════════════════
A font style, that while simplified by old tradition, saw new light by modern sophistication.
It comes in a solid medium weight that is very suitable for body style text with good readability, but it does perfect clean headlines or ads as well.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The goal was to make a clean but somewhat more contemporary and playful take on a 'Grotesque' sans-style.
In an attempt to break away from the traditional trend of Grotesque type designs which evolved more around pure geometric shapes and aim for perfect circular, triangular or square shaped letterforms, that in return give many of them a somewhat harsch and featureless mechanical appearance, I choose to try and achieve the opposite, aiming for a softer, friendlier and more humanized feeling instead.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Dimensions: (in grid units)
X-Height: 1 .625
Cap-Height: 1 .875
Em: 3 .5
Brick Size filter: 2 : 2
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This is the 'Therapy'-style in the 'ELEGANZA' typeface family. This version basically aims for the exact opposite effect than what the Tight' version did. The name 'Therapy' relates to its 'opened-up' appearence and the overall de-stressed propperties of this version. The more relaxed and spacious distribution remotely resembles the characteristic feel of a typewriter face. But the main purpose for this version is to create visual hierarchy in your layout.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The other style variations can be found here:
ELEGANZA (Tight)
ELEGANZA (Tall)
I hope you like it...
This is a clone of STF_ELEGANZA (Tight)KROEPOEK -Letterforms influenced by the orient.
=============================================
Simple geometry based design that tries to imitate Asian style letterforms.
=============================================
The font comes as a "all-caps"(majuscules) with the lowercase string used to include a set of glyph alternatives for the uppercase set, but cutting the descending parts of the glyphs.
As a little bonus, a set of underlined lowecase vowel alternatives (a, e, i, o, u and y) was also included to allow a small level of personal depth. These can be found in the Unicode block for: 'Halfwidth and Fullwidth Forms'
Besides the letters there is also a set of essential punctuation and symbols present to make the font proper functional.
=============================================
I hope you like it,
Cheers!
This project is abandoned.
Description:
Perfectly monospaced 5x7 font (even watermarks!).
Note: Some characters are exceeding 5x7 size, though font boundaries are the same and the font itself is monospaced.
Note 2: Some characters are double or triple of the horizontal size of a letter, e.g. 11x7 (occupies exactly 2 characters), 17x7 (occupies exactly 3 characters) etc.
Includes:
* Basic Latin
* More Latin
* Extended Latin
* Even More Latin
* Basically all kinds of Latin
* Greek and Coptic
* Coptic
* Cyrillic
* Arabic
* Devangari
* Hebrew
* Katakana
* Thai
* Georgian
* Georgian Extended
* Armenian
* Bopomofo
* Hiragana
* NKo
* Tifinagh
* Cherokee
* Runic
* Tai Le
* Ol Chiki
* Brahmi
* Old South Arabian
* Old Turkic
* Lydian
* Shavian
* General Punctuation
* Superscripts and Subscripts
* Currency Symbols
* Letterlike Symbols
* Box Drawing
* Block Elements
* Arrows
* Geometric Shapes
* Phonetic Extensions
* Number Forms
* Mathematical Operators
* Miscellaneous Technical
* Miscellaneous Symbols
* Miscellaneous Symbols and Pictographs
* Mathematical Alphanumeric Symbols (Bold Serif)
* Control Pictures
* Enclosed Alphanumerics
* Dingbats
* Brailie Patterns
* Progress bar similar to Fira Code
And more!
Changelog:
1.4.0 (5969 chars) (working on)
Changed:
* Made Box Drawings bold
Added:
* Brahmi
* Old Turkic
* Old South Arabian
* Shavian
* Lydian
* Miscellaneous Symbols and Pictographs (not finished yet)
* Mathematical Alphanumeric Symbols (Bold Serif part)
1.3.0 (5244 chars)
Changed:
* Redone Hiragana
* Redone Katakana
Added:
* Miscellaneous Technical
* Miscellaneous Symbols
* Ol Chiki
* Georgian Extended
1.2.2 (4643 chars)
Changed:
* Fixed Hiragana
1.2.1 (4615 chars)
Added:
* Runic
* Tai Le
1.2.0 (4499 chars)
Added:
* Cherokee
Changed:
* Fixed some characters' width
1.1.0 (4379 chars)
Added:
* Coptic letters (different from Greek and Coptic)
* Tifinagh
1.0.1 (4197 chars)
Changed:
* Fixed Block Elements grid
1.0.0 (4197 chars)
First release of this font
Feel free to post issues, ideas and questions in the comments!
P.S. On Windows this font will be corrupted and would not install. This problem also occures in some other fonts with many characters in them.
You still can use this font as a file for some programs.
STF_THUNDERDOME - A tall thin stroked Art Deco typeface.
I tried to create pretty simple, elegant but somewhat wonky geometric letterforms.
Inspired by the later 70's Art Deco Streamline period.
--------------------------------------------------------
This remains a WIP, many of the glyphs in the Extended-Latin set aren't reflecting their Basic-Latin counter-parts. The character set remains far from complete for now, and many changes need to be made still.
Kerning done only for a few pairs and overall balance therefor is still quite poor I guess.
Some 'more' detailed but derailed towards the end 'in-depth' recap of this font could be found bellow in the comment section.
Stay tuned for more,
Peace!
This is a clone