Searching for more “Sans Serif” fonts?
Buy and download “Sans Serif” fonts at MyFonts.
BiaSachXua - Bìa Sách Xưa - Old Book Covers
If you look at this font, you'll think that this is just some display font with 3-1-brick contrast (actually it is), but this font is special because it is actually used in a lot of old books in Vietnam in the 1980s (for covers), there's a font for this before (in DaFont), but it wasn't popular, so I want to re-popularize the font to the FontStruct community to see the history of Vietnam through font.
Some of the characters on this font will be weird such as the z looks like a small number 2, but it is what it is.
The UPPERCASE height (cap-height) is 16 blocks tall.
The LOWERCASE height (x-height) is 10 blocks tall.
The DESENDER will be (maximum) 5 blocks.
You can find the original font here: https://www.dafont.com/biasachxua.font
The original font have 367 glyphs, I will try to add more alternative glyphs to increase it.
CHECK LIST:
Uppercase: Done (26/26)
Lowercase: Done (26/26)
Numbers: Done (10/10)
UPCOMING: Punctuation and more Latin-based characters
THE FONT IS BEING MADE, IT'S NOT COMPLETED YET.
a cyberpunk font with sharp corners. inspired from a variety of sources but mostly the vectorheart aesthetic (which the "vect" part of the name refers to) from the 2000s. the "ix" part refers to the 9-block height of the capital letters and numbers. you may use this font for anything as long as you credit me. vectix is the future, now is the time to embrace it.
GlyphLandyn/Lilly is a sans-serif, pixel optimized with monospace Latin, Greek and Cyrillic letters and PUA (Private Use Area) characters. The  Object Replacement Character is a full square.
This font also includes Thai characters and Linear B Syllabary.
This font is edited with Fontstruct.
SPOKOYNOY NOCHI — 1920's Art-Deco style
═══════════════════════════════════
This is a simple monolinear Art-Deco unicase font. Upper & Lower case glyphs are the same sets. But in addition to the unicase (default style) there is a full alphabet of glyph alternate forms located in the Half Width And Full Width Forms Unicode block.
I done global kerning, but extra pairs are still required..
I hope you like it,
Cheers
FABRIKATA —1920s Art-Deco & Dada Constructivism inspired style
═══════════════════════════════════
This is latest in experiments into constructing high quality customized curved shapes in small grid fonts.
For FABRIKATA I intended to break away from the grid completely, and create complex geometric letterforms with ultra smooth custom curvatures (near real Bézier).
This is what became the end result of that endeavour.
FABRIKATA sits somewhere between Alphabet Soup's Grafika typeface, countless of old Dada Constructivism print material and the brand logo lettering for Plantur 39.
Exercise
The alternative of Stf nobuntu
Groutaskk - a humanist/geometric sans serif typeface
Version 1.0.0
- Making more custom smooth rounds, Improving the inktraps & the tapered spurs of some glyphs(M,N,a,b,d,g,m...)
- Making more custom bricks and composites
- completed all the chars in the Unicode block "Basic Latin"
Version 1.0.1
- added more accents and finish the Unicode block “Latin 1 supp.” & some chars in “Latin extended a”
LSans
666 characters
NICE LEGS
This is a monolinear hairlined sans-serif typeface inspired by Art-Deco-ish classic modern and old ultra narrow typeface designs that evoked a feeling of sophistication and luxury..
This is a monolinear hairlined sans-serif typeface inspired by Art-Deco-ish classic modern and old ultra narrow typeface designs that evoked a feeling of sophistication and luxury..
A condensed slim & elegant style that has this classy look. The tall upper-case evokes elegance and it's asymmertical high- / low- waist distribution.
NICE LEGS was built using simple geometric shapes to make clean and legible letterforms. The super tall uppercase letters and the low x-height,
making this an eccentric, yet elegant san-serif type
— “Condensed, slim & stylish tall glyphs with that classy look that evoke elegance”.
It's asymmetric high- / low- waist positioning gives the lettering a distinct retro look & bohemian feeling that is great for logos & branding, packaging, titles, magazines, posters, signs, and scrapbooking.
As far as it is a clean looking font, it is not designed for large amounts of Body Copy text. It does work at small size, but it is perfect for branding , logos, and posters.
This font comes in both Capital & Lower letter cases. It's also equipped with many other charaters, such as; Ligatures, Numbers, Punctuation Marks, Accented Latin and a supply of special characters
It’s a minimalist sans-serif, delicate and romantic! The smooth and light execution of it’s clean and sharp lines making this font look sleek and elegant, feminine which is perfect for modern fashionable branding designs.
A condensed font with visual elegance, and smooth curves that make your work look true and attractive. Making this a perfect sans suitable to a wide variety of designs due to its neat and simple style.
More details soon
PS: I'm still working on kerning the font...
Cheers
NGrider would appreciate
A text cut of those nautical art deco typefaces, cobbled together from @Sed4tives's faux bezier curve tools
WIP: Currently working on kerning for accents. I guess it's what those folks over at Future Fonts do
This is a clone of STF_FAUX BEZIER ROTUNDSArt-Day-Co. — Decorative geometric futurist sans
═══════════════════════════════════
A more experimental and fururistic take on a standard geometric grotesque that started out as "All-Caps" lettering concept. The innitial first idea was to create capital letters only and to provide these with additional capital letter alternate forms, Now, things not always go as they were invisioned, as was the case during this project..
After creating a couple of capital letters, and just when I was thinking I had this new brainchild for a cool looking font, I ren out of ideas for more experimental letter solutions; — Inspiration dried up quicker than water droplets evaporate on the surface of the sun!
But honestly imo things especially got interresting when I unintentionally started doodling lowercase letters for this font. And I don't know what happeded here, but it somehow completely changed the mood of this font (To understand what I mean just cross-compare 2 lines of text, one with all lowercase text and the other all caps text).
Both somewhat very different, but mixing effortlessly to create a very distinct and unique looking font. I can't put my finger to it as to what style it is.
Cheers
STEAMLINER — 1920s Art-Deco style
═══════════════════════════════════
[ INTRODUCTION ]
Steamliner is a simple looking linear All-Caps display font with elegant geometric letters. It comes from a mix of Art-Deco retro style with a distinct irregular curved asymmetry, Essentially blending Art-Deco with Art Nouveau into a more simplified clean & solid lettering style.
The character set mixes various glyph alternative forms for the capital letters together to provoke a slight feel of randomness.
— The font Em-square is only 1.5 × 1.5 bricks
Cheers
I am a graphic design student at UWE bristol. I have created a digital typeface inspired by bristol docks, i looked alot at the hooks on the cranes and used the shapes from that and other machinery for the structure of my letters.
An updated typeface inspired by the home of Fine Art in Bristol, the Arnolfini Building, now including a lower case and numbers. This takes queues from its grotesque, black-letter typeface along the outside. Working on a small scale allowed me to ensure the uniformity of each character in the font.
This is a clone of Nineteen Sixty One Sans v1BATAVIER (Pro) — Geometric display sans
═══════════════════════════════════
[ MEMOIR ]
Revision / revival of the geometric lettering seen on a 1916 Dutch litho poster for the Wm H. Müller & Co.'sRotterdam-London passenger service called Batavier-Line(Batavier-Lijn in Dutch) which was originally designed by Bart van der Leck(1876 - 1958).
The Batavier Line existed from 1830-1960, and was the oldest steam shipping line in The Netherlands.
[ UPDATE INTEL ]
A couple of small changes were implemented compared to v/d Leck's original lettering. Most significant is the upscaled Ampersand, but numerous other small cosmetic or optimizing modifications were made as well.
I completed the full alphabet plus numerals and included additional symbols and punctuation marks to make it a fully functional typeface. The lettering is all caps (majescule) only. Some lowercase letter locations harbour a glyph alternate uppercase form as could be seen in the original litho poster source. Another bunch of alternate uppercase forms and underlined “superior” small capital letters were located in the “Halfwidth And Fullwidth Forms” Unicode block. In addition to that it has accented Latin letters for multilingual support. Also two resized alternate forms for the Ampersand and two stylish ligatures have been included.
[ SUMMARY ]
This is actually the second revision I did for the litho lettering by v/d Leck. The first attempt was made using a (faux-) Bézier approach, resulting in a huge grid canvas (168 grid units / bricks tall monstrosity). This made it a lot of hard work to build and for some letters impossible to properly implement kerning since FS values only allows min. -10 / max. 10 of grid units for kerning.
As part of the endeavor to refurbish some of my older FontStructions STF BATAVIER was one of those that was in serious need of some overhauling as well. The problem it presented was the font's cap-height. It was actually so tall and impractical to work and / or modify, that the first revival attempt never really fully materialized beyond a basic character set.
A full glyph only fitted on screen with the FS-editor zoomed-out max. and my browser zoomed-out at 30%. At this scale not only the canvas grid lines in FS's editor all but dissapeared, but it also resulted in a down-sized brick (or 1 square grid unit) with on-screen rendering at only 3×3 pixels, as oposed to 64×64 pixels with the FS-editor's default zoom settings.
So imagine selecting a tiny 3×3 px speck when working the glyph canvas at brick level to modify glyphs... pretty much impossible. Now, the other situation wasn't a whole lot better. This had the browser's zoom restored back to 100%, making the glyph canvas at brick level “workable” again. But in respect to the cap-height this only renders a very small section of the glyph on-screen. Requiring a huge deal of additional canvas navigation in FS's canvas editor, better known as “Pan the view (H)”, which is done with the hand tool.
And well, as many of you will know, this is an absolute bummer When navigating (or panning) a glyph bottom to top requires 3 full canvas swipes.
So yeah, the only way for an extended version ever to materialize was to be rebuild it from the ground up at a much small scale, using very different measurement ratios compatible with FontStruct's kerning.
[ TECH INTEL ]
This second revision attempt successfully reduced the font's cap-height down to a comfortable 5 bricks (or grid units) tall and Em-square of 7 bricks total. Some optical compensations were implemented to certain elements such as stroke weight corrections and careful minute differences in vertical positioning of letter mid-section elements.
For now thats all Folks..
Cheers
SEADWELLERS — 1920s Art-Deco Sans style
═══════════════════════════════════
I was somewhat inspired to do a Art-Deco style lettering of my own after seeing the stylish Art-Deco flavored FontStruction Aquamarine by IronClaws
Other than that the two fonts remain unrelated and Seadwellers poses no resemblance to Aquamarine. Instead I sort of did a 1920s Art-Deco style lettering with thin geometric letterforms. It's comes as a Majuscule only and the letters have nice quirky width variations, with some letters appearing almost extended, while others are more narrow.
— The similar aqua-themed concept is merely coincidental.
Only basic character set!
It remains a WIP for now..
Cheers
DAN NIET — Futuristic rounded sans
═══════════════════════════════════
This is a recreation of Svetoslav Simov's Dan typeface that was published by Fontfabric back in 2010.
A while ago I came across some image that used this cool futuristic geometric sans. And without first doing proper research I started to FontStruct the lettering seen in the image. Once those were completed I didn't really had a good vision on where to lead the rest of the letter inventions, so I went looking online to find something similar that perhaps could get me inspired to complete it after all.
Scouring the web for a while I stumbled upon some sample images for a typeface called DAN by Svetoslav Simov. And it was unmistakably the font seen in the initial image that I used for the first couple of letters.
Now, I could've abandoned the project at this stage and take my loss, but I felt that the work that already had been done up to this point would be a sad waste of something that was actually kind of fun to make. So for this reason I decided to go ahead and continue the project, and instead this time the focus shifted towards recreating the original DAN typeface.
I included a number of small changed to certain letterforms to suite my personal preference better, but it very much remains Svetoslav's work.
Because the original DAN typeface is a commercial product this recreation won't be made available for downloading. It was strictly made for the fun of it, with no intent to redistribute. It was published solely as a showcase of the FontStruct editor's capabilities.
I dubbed the project DAN NIET which is Dutch forTHEN DON'T.
This sort of as a wordplay to the original's name and it's off-limit legally restricted status, hence the inclusion ofDON'T.
— It still remains a WIP..
═══════════════════════════════════
DISCLAIMER:I hereby state that I do not own the rights to this, and all rights belong to it's original owner. Credits for the original lettering concept go to the creator. No Copyright Infringement Intended.
Cheers
This is a refix on HTG Futuroid, which was cloned to make this font.
This is a clone of HTG FuturoidJS-SANS MARX (COMPRESSED BOLD) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.
This time I did a revival based on a sans-serif lettering concept Schrofer did in 1968 during his time with Mouton & Co. The lettering concept was seen on his book cover design for the book "Marx and contemporary scientific thoughts; Marx et la pensée scientifique contemporaine". The book cover only shows 4 lowercase letters, spelling the word "marx". But these pretty much have all the important features to extrapolate the remainder of the alphabet from. At the same time having just 4 letters allows for a much more loosely approach towards inventing the other letter solutions.
I decided to create a typeface family of multiple styles each with different weight properties (Light, Medium & Bold in both Compressed and Condensed form). The medium weight is what was actually seen on the original book cover.
I hope you like it,
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAAT for the full catalog of fonts I contributed to this project so far.
Cheers
This is a clone of STF_JS-SANS MARX (CONDENSED BOLD)JS-SANS MARX (COMPRESSED MEDIUM) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.
This time I did a revival based on a sans-serif lettering concept Schrofer did in 1968 during his time with Mouton & Co. The lettering concept was seen on his book cover design for the book "Marx and contemporary scientific thoughts; Marx et la pensée scientifique contemporaine". The book cover only shows 4 lowercase letters, spelling the word "marx". But these pretty much have all the important features to extrapolate the remainder of the alphabet from. At the same time having just 4 letters allows for a much more loosely approach towards inventing the other letter solutions.
I decided to create a typeface family of multiple styles each with different weight properties (Light, Medium & Bold in both Compressed and Condensed form). The medium weight is what was actually seen on the original book cover.
I hope you like it,
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAAT for the full catalog of fonts I contributed to this project so far.
Cheers
This is a cloneJS-SANS MARX (COMPRESSED LIGHT) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.
This time I did a revival based on a sans-serif lettering concept Schrofer did in 1968 during his time with Mouton & Co. The lettering concept was seen on his book cover design for the book "Marx and contemporary scientific thoughts; Marx et la pensée scientifique contemporaine". The book cover only shows 4 lowercase letters, spelling the word "marx". But these pretty much have all the important features to extrapolate the remainder of the alphabet from. At the same time having just 4 letters allows for a much more loosely approach towards inventing the other letter solutions.
I decided to create a typeface family of multiple styles each with different weight properties (Light, Medium & Bold in both Compressed and Condensed form). The medium weight is what was actually seen on the original book cover.
I hope you like it,
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAATfor the full catalog of fonts I contributed to this project so far.
Cheers
This is a clone of STF_JS-SANS MARX (COMPRESSED MEDIUM)JS-SANS MARX (CONDENSED MEDIUM) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.
This time I did a revival based on a sans-serif lettering concept Schrofer did in 1968 during his time with Mouton & Co. The lettering concept was seen on his book cover design for the book "Marx and contemporary scientific thoughts; Marx et la pensée scientifique contemporaine". The book cover only shows 4 lowercase letters, spelling the word "marx". But these pretty much have all the important features to extrapolate the remainder of the alphabet from. At the same time having just 4 letters allows for a much more loosely approach towards inventing the other letter solutions.
I decided to create a typeface family of multiple styles each with different weight properties (Light, Medium & Bold in both Compressed and Condensed form). The medium weight is what was actually seen on the original book cover.
I hope you like it,
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAAT for the full catalog of fonts I contributed to this project so far.
Cheers
This is a clone of STF_JS-SANS MARX (CONDENSED BOLD)JS-SANS MARX (CONDENSED LIGHT) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.
This time I did a revival based on a sans-serif lettering concept Schrofer did in 1968 during his time with Mouton & Co. The lettering concept was seen on his book cover design for the book "Marx and contemporary scientific thoughts; Marx et la pensée scientifique contemporaine". The book cover only shows 4 lowercase letters, spelling the word "marx". But these pretty much have all the important features to extrapolate the remainder of the alphabet from. At the same time having just 4 letters allows for a much more loosely approach towards inventing the other letter solutions.
I decided to create a typeface family of multiple styles each with different weight properties (Light, Medium & Bold in both Compressed and Condensed form). The medium weight is what was actually seen on the original book cover.
I hope you like it,
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAATfor the full catalog of fonts I contributed to this project so far.
Cheers
This is a clone of STF_JS-SANS MARX (CONDENSED BOLD)JS-SANS GRAFISCH (Regular) ― Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.
This time I did a revival based on a sans-serif lettering concept Schrofer did in 1968. The lettering was used in several of his later smaller projects, mainly for some design work regarding the Schrofer family. One of such was the wedding card he designed for Olga Schrofer & Djien Injo. Schrofer had never designed a complete alphabet for this specific lettering, and all the gathered resource material I was able to collect ( 1, 2, 3, 4 ) still yielded a combined total of 19 different lowercase letters "acdefghijlnoprstuwy"
Anyway, by the looks of it we can asume that this derived from or eventually had led to another one of his alphabet systems that came around that same time. This was one of his alphabet systems that he developed into a complete typeface. First appearance back in 1968 on Olga & Djien's wedding card. Later a slight modified variation of that same sans-serif system was used for the Dutch 1969 postage stamp design that celebrated the 50th anniversary of the 1919 International Workers' Organization. Several more instances would later follow, But the best and most complete preview of this sans-serif concept is probably seen on the red / white alphabet sample composition he did. Here a semi-bold version was completed to a full lowercase (a-z) alphabet set and small caps figures (no symbols or punctuation marks)
This particular alphabet system eventually saw extensive use, and can be seen in many of his work, ranging from book designs and brochures all the way to postage-stamps. So there is no shortage of resource material on this alphabet system.
Over the course of its existence the alphabet was constantly evolving, and Schrofer kept expanding the system with additional new weights and slight variations. But during his time with Mouton & Co. the concept basics for this sans system became one of his lettering workhorses, and saw widespread application.
Schrofer made several attempts to create complete typefaces, but this was never his goal. "Is it necessary.."he wrote,"To make complete alphabets with upper- and lowercase, figures, diacritics and seriously adorned with a name, when aim is merely a formal investigation into basic recipes?"
Schrofer's domain was never the design of typographic alphabets to be used by other designers. In addition, the lack of any naming for its alphabet systems and lettering-concepts can sometimes make it difficult to tell things apart, or instead group them into several larger font families, consisting of multiple weights and -or slightly modified style variations.
This specific proportion that I used for the revival of the alphabet system only appeared in three small occasions of Schrofer's autonomous works.
It basically is the same simple, clean, but solid looking geometric sans-serif system he often reused. It is also the same general concept for the alphabet system STF_SANS ROUNDED was based upon, but with some minor changes.
This variation comes in a smaller weight and less condensed form, more open-spaced letters that almost feel expanded. The medium contrast on its vertical axis remains. In addition the overall character set was greatly extended as well as several other minute changes that were incorporated.
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAAT for the full catalog of fonts I contributed to this project so far.
Cheers
This is a clone