5601560
Published: 6th May, 2009
Last edited: 6th July, 2009
Created: 5th May, 2009
A heavy octagonal font designed to be readable at small point sizes. Letters and numerals are monospaced, while most punctuation marks and some other symbols are proportional.This is a clone of OctagonoPropC
3711781
Published: 11th June, 2009
Last edited: 19th July, 2010
Created: 10th June, 2009
A variant of XLProportional with more prominent punctuation marks and some other symbols.This is a clone of XLProportional
2401552
Published: 19th August, 2009
Last edited: 19th August, 2009
Created: 18th August, 2009
A bold proportional font whose characters are tall and narrow.
1081321215
Published: 11th December, 2010
Last edited: 11th December, 2010
Created: 6th December, 2010
This is an octagonal display font with glyphs that are framed or outlined.
3002121
Published: 21st December, 2010
Last edited: 12th December, 2010
Created: 1st December, 2010
A bolder version of Octagonico. I think it's a little better than the original.
5632125
Published: 25th December, 2010
Last edited: 16th July, 2011
Created: 14th December, 2010
An ultra bold octagonal font that is as heavy, dark, and angular as its namesake suggests. Incidentally, I know the "black" rhino is actually gray, but so what? :)
951321223
Published: 25th December, 2010
Last edited: 18th January, 2011
Created: 23rd December, 2010
An outline version of BlackRhino. And I'm aware of the fact that the "white" rhino is really light gray.
190790
Published: 7th February, 2011
Last edited: 17th February, 2011
Created: 2nd February, 2011
A small font based on Agitation Propoganda (Agit Prop) done for a Typography class assignment. Still a work in progress, but it's coming along alright.
4301014
Published: 12th February, 2011
Last edited: 18th February, 2011
Created: 11th February, 2011
This font doesn't break any new ground. But after BlackRhino and WhiteRhino, the name (thank you, Cousin Debbie!) was irresistible. Only the Basic Latin characters are included here; for the accented glyphs and More Latin symbols, please download AlbinoRhinoPart 2.
1101131
Published: 18th February, 2011
Last edited: 18th February, 2011
Created: 17th February, 2011
This font includes only the accented glyphs and More Latin symbols; for the Basic Latin characters, please download AlbinoRhinoPart1.
6125299
Published: 6th April, 2011
Last edited: 8th January, 2016
Created: 10th March, 2011
Here is another font coming from the Imagewriter II printer to your hard drive's font folder. This font is based on the printer's built-in proportional character set.
As was the case with my previous IMGwriter fonts, this includes characters (such as accented capitals and Greek characters) that are not originally part of the printer's default character sets.
UPDATES:
* 2014.04.15: Small update includes combining diacritic marks; this was done to circumvent a bug in some Mac programs where the accented characters wouldn't appear correctly after typing in Option+N then N, for example.
* 2013.05.27: Greatly extended the character set.
701021
Published: 28th April, 2011
Last edited: 15th May, 2011
Created: 28th April, 2011
This is a non-anti-aliased near-replica of Times New Roman, designed using only full pixels. Note: this font works best at small font sizes.
3242124
Published: 19th July, 2011
Last edited: 22nd July, 2011
Created: 15th July, 2011
This is the latest offspring of my Rhino font family. I'm pretty sure the striped rhino doesn't exist, but here is its namesake anyway.
4252721148
Published: 3rd September, 2011
Last edited: 20th June, 2013
Created: 28th March, 2010
Finally, a non-monospaced version of Bevel'sAdvocateMono.
This font was started eighteen months ago, so I suppose the time has come at last to kick it out of the nest and let it fly.
I believe that several of these new glyphs are superior to those in my original monospaced font.
32231938
Published: 23rd September, 2011
Last edited: 25th October, 2011
Created: 21st September, 2011
This font is an experiment using filters set at vertical 2 and horizontal 1. Any comments and suggestions for improvement are welcome!
1421924
Published: 30th September, 2011
Last edited: 30th September, 2011
Created: 28th September, 2011
The Farrutx "big brother".This is a clone of Farrutx
3302012
Published: 7th October, 2011
Last edited: 24th October, 2011
Created: 26th September, 2011
This is a cousin of my Curvilino font, although no glyphs were cloned from that earlier work. Also, the filters used here are the normal 1 to 1, while Curvilino's filters were set at 2 to 1. The result is that each character of Rondino is half as tall as the corresponding Curvilino glyph at the same point size.
2602013
Published: 14th October, 2011
Last edited: 23rd October, 2011
Created: 10th October, 2011
Another cousin, though not a clone, of both Curvilino and Rondino. For this variation the filters have been set at 2 by 2.
5101035
Published: 12th November, 2011
Last edited: 10th November, 2011
Created: 9th November, 2011
This font is a filled-in (abbreviated) version of Bevel'sAdvocateProportional, which was created at the request of a potential client.This is a clone of Bevel'sAdvocateProportional
60981
Published: 15th November, 2011
Last edited: 5th September, 2011
Created: 5th September, 2011
A proportional pixel font with a tiny x-height of just four pixels. And unlike the original Greypixels, this one has lowercase!
1901013
Published: 30th January, 2012
Last edited: 30th January, 2012
Created: 30th January, 2012
This is a clone of Elephant and castle with added punctuation and adjusted spacing. It should be fairly usable, though I'm not happy with some of the symbols ($, /, \, @). I hope it can be useful!This is a clone of Elephant and castle
3001324
Published: 30th January, 2012
Last edited: 30th January, 2012
Created: 30th January, 2012
This is a clone of Star Wreck Intergalactic to be in small caps and have no descenders. Almost all of the international characters from Star Wreck Intergalactic are gone, so the height is much smaller. This could be good for a title or logo. I do not intend to interfere with the copyrights, trademarks, or intellectual property of the Star Trek franchise, and this font is freely available because it is believed to be a fair use of the style of a Star Trek logo. Beam me down, Scotty!This is a clone of Star Wreck Intergalactic
1811253
Published: 4th March, 2012
Last edited: 4th March, 2012
Created: 4th March, 2012
To be as as compact as possible horizontally and legible at small sizes... Based closely off of the work of Thomas Whetnall at http://eight2empire.blogspot.com/2012/02/exploring-type.html , this tiny proportional-width pixel font is meant to be used in games where space is at a premium. Its widest glyphs are 5 pixels across (not including spacing between characters), and at most 8 pixels tall. I have made a few modifications from the original, on the characters 'H', 'I', 'K', 'l', 'u', 'w', '0', '@', and possibly changing the vertical positions of some punctuation. I added in some Latin-1 glyphs that show up a lot, like the copyright symbol and the ellipsis. This font strongly emphasizes the difference between glyphs rather than using traditional letter-forms, so while it may look odd at first, the legibility could grow on you.
5561036
Published: 13th April, 2012
Last edited: 13th April, 2012
Created: 12th April, 2012
An abbreviated outline version of my Bevel'sAdvocateProportional font.
70980
Published: 22nd June, 2012
Last edited: 22nd June, 2012
Created: 22nd June, 2012
Proportional Program5x7. Line height is 7 pixels.This is a clone of Program5x7a