BATAVIER (Pro) — Geometric display sans
═══════════════════════════════════
[ MEMOIR ]
Revision / revival of the geometric lettering seen on a 1916 Dutch litho poster for the Wm H. Müller & Co.'sRotterdam-London passenger service called Batavier-Line(Batavier-Lijn in Dutch) which was originally designed by Bart van der Leck(1876 - 1958).
The Batavier Line existed from 1830-1960, and was the oldest steam shipping line in The Netherlands.
[ UPDATE INTEL ]
A couple of small changes were implemented compared to v/d Leck's original lettering. Most significant is the upscaled Ampersand, but numerous other small cosmetic or optimizing modifications were made as well.
I completed the full alphabet plus numerals and included additional symbols and punctuation marks to make it a fully functional typeface. The lettering is all caps (majescule) only. Some lowercase letter locations harbour a glyph alternate uppercase form as could be seen in the original litho poster source. Another bunch of alternate uppercase forms and underlined “superior” small capital letters were located in the “Halfwidth And Fullwidth Forms” Unicode block. In addition to that it has accented Latin letters for multilingual support. Also two resized alternate forms for the Ampersand and two stylish ligatures have been included.
[ SUMMARY ]
This is actually the second revision I did for the litho lettering by v/d Leck. The first attempt was made using a (faux-) Bézier approach, resulting in a huge grid canvas (168 grid units / bricks tall monstrosity). This made it a lot of hard work to build and for some letters impossible to properly implement kerning since FS values only allows min. -10 / max. 10 of grid units for kerning.
As part of the endeavor to refurbish some of my older FontStructions STF BATAVIER was one of those that was in serious need of some overhauling as well. The problem it presented was the font's cap-height. It was actually so tall and impractical to work and / or modify, that the first revival attempt never really fully materialized beyond a basic character set.
A full glyph only fitted on screen with the FS-editor zoomed-out max. and my browser zoomed-out at 30%. At this scale not only the canvas grid lines in FS's editor all but dissapeared, but it also resulted in a down-sized brick (or 1 square grid unit) with on-screen rendering at only 3×3 pixels, as oposed to 64×64 pixels with the FS-editor's default zoom settings.
So imagine selecting a tiny 3×3 px speck when working the glyph canvas at brick level to modify glyphs... pretty much impossible. Now, the other situation wasn't a whole lot better. This had the browser's zoom restored back to 100%, making the glyph canvas at brick level “workable” again. But in respect to the cap-height this only renders a very small section of the glyph on-screen. Requiring a huge deal of additional canvas navigation in FS's canvas editor, better known as “Pan the view (H)”, which is done with the hand tool.
And well, as many of you will know, this is an absolute bummer When navigating (or panning) a glyph bottom to top requires 3 full canvas swipes.
So yeah, the only way for an extended version ever to materialize was to be rebuild it from the ground up at a much small scale, using very different measurement ratios compatible with FontStruct's kerning.
[ TECH INTEL ]
This second revision attempt successfully reduced the font's cap-height down to a comfortable 5 bricks (or grid units) tall and Em-square of 7 bricks total. Some optical compensations were implemented to certain elements such as stroke weight corrections and careful minute differences in vertical positioning of letter mid-section elements.
For now thats all Folks..
Cheers
This is font named "InfiniNikiFanStruct2023 Max" Was designed by FontStructor description:
Larger than 9999999999x glyphs.
A good font and best font ever!!!!
꧁ Inspirations ꧂
Pixel sans
Gs Unicode 2.0
Catrinity
Nishiki-teki
Fairfax HD
AwesomeDylanStruct/CoolStruct II
InfiniGlyphs Max 1.3 (we found is out than Gracian Gonzalez-Clemente account).
Electronic data/Futuristic Weegee
꧁ Milestone of glyphs ꧂
8000: X
10K: X
꧁ Links ꧂
Enjoy this, Good luck!
SEADWELLERS — 1920s Art-Deco Sans style
═══════════════════════════════════
I was somewhat inspired to do a Art-Deco style lettering of my own after seeing the stylish Art-Deco flavored FontStruction Aquamarine by IronClaws
Other than that the two fonts remain unrelated and Seadwellers poses no resemblance to Aquamarine. Instead I sort of did a 1920s Art-Deco style lettering with thin geometric letterforms. It's comes as a Majuscule only and the letters have nice quirky width variations, with some letters appearing almost extended, while others are more narrow.
— The similar aqua-themed concept is merely coincidental.
Only basic character set!
It remains a WIP for now..
Cheers
MOVIEMAX — Groovy bold & roundish 70s display sans
═══════════════════════════════════
Moviemax is a bold display sans-serif that has a groovy 70s offbeat look. Essentially an all-caps lettering concept with simple looking letters. The basic geometry and inversed contrast with its soft rounded finish create an immediate endearing effect.
The default characterset comes as all-caps (unicase) only, with no glyph alternative forms. It has been completed with additional symbols and punctuation marks.
To make thing a little more interresting I have also included a full (A-Z) alphabet set of small-caps letter modifications with drastically altered proportions. Complete removal of the inversed stressed contrast to make a more simplified and cleaner looking minimalist letter style. Their size was also reduced to 50% of the cap-height (scale ratio ≈ 1:2), providing an optional alternative for the missing lowercase forms in the font.
To finished off this extra set of small capital letters, another additional full (A-Z) alphabet set of large capital letters was included. These letters have also been scaled down a bit to better fit with the small capital letter set (scale ratio ≈ 6:8 or 75% of cap-height).
The 2 sets include a slight more unique and stylized level of sophisticated characteristics to the font, and when used combined together in a mixed-case text format creates nice text capitalization.
These alternative forms are located in the Halfwidth and Fullwidth Forms unicode block.
A set of basic punctuation marks that align with the small capital letters had also been included and could be found in the Halfwidth and Fullwidth Forms & Private Use Area 2 unicode blocks.
I hope y'all like it
Cheers
This is just a silly unicase font with alternates, made with simple squares and triangles (and some few other bricks)... But the colours captivated me. I hope you like the result. PS: You can also find an additional colour space (if you need it) in the "|" glyph.
This is a cloneThis is an Soniano Sans Unicode 2.0
New Update:
More SML, More Greek, More Cyrillic, Armenian, Superscripts and subscripts, More number forms, the character count is 2424!
This is a clone of Soniano Sans UnicodeA monospaced typeface perfect for code. It's free to use any way imaginable.
This is a clone of Anonoma Mono Less CharactersMade with the well-known Grafilone typeface (by Bo Berndal) in mind, but more elongated and avoiding its curious roughness. In addition to the basic set of glyphs, some special ones have been added and the Cyrillic alphabet has also been included. The ligatures "ff" and "tt" are located on the characters "ff", "fi" and "fl". Enjoy it, please.
VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESPHOTONIA (Pro) - 70s future retro style
═══════════════════════════════════
70s style reverse contrast sans with future retro aesthetics, perfect for projects with a vintage sci-fi, space age or computer theme.
This is actually a refurbished and extended version of an older FontStruction I did back in 2019. The original PHOTONIA was a cool looking little work, but didn't quite made the most of its design concept. Inexperience and poor design decisions had led to inconsistencies and other flaws throughout the font. Besides those it also had a small character set that mostly consisted out of the basic Latin block and bare essential symbols & punctuation marks. But imo it still had quite an interresting retro vibe and the potential to be more. So I decided to give the old project some well deserved refreshments.
First I started eliminating the inconsistencies that were present in the older work, than I continued polishing and re-design / modify several characters hoping to create a greater overall unity to the entire piece. Once I was fully satisfied with this renewed improvements it was time to build and expand the character set towards a more complete lingual and typographic support.
➜ ⚠ Previous Version:
▶ Basic Latin only
▶ Minimal kerning
➜ ⚠ What's New Inside:
▶ Additional Latin and accented Latin
▶ Diacritics
▶ Many glyph alternative forms
▶ Additional symbols and punctuation marks
▶ Horizontal box drawing (page deviders)
▶ Typographical symbols
▶ Ornamental printer's characters
▶ 1680 stored kerning pairs
Cheers
This is a cloneThis is my first ever font using ideas to make an heavy sans-serif typeface. I was inspired by elmoyenique and Jamie Place (FontBlast). I'm not stealing ideas from anybody by the way, I've wanted to share something to explain a journey of making my own fonts in life.
I got some aspect of making the glyphs look heavier. I've tried to make the letter f, but it flawlessly has the same height as the other glyphs. If I make number four, than I've obviously make it like this because the slanted bricks are not enough to make up a four glyph. Some of the glyphs (for example: ð, ß, ™, ®) are hard to build it because it was considered to be rounded by its curve and too small if the text was heavier.
When I run out of name ideas, the only idea of this font name i've chose is Lourde (french word for heavy).
Unicase font with a lot of alternates in the lowercase to improve the general playfullness. Also added more diacritics and accents, and remodeled and kerned the old glyphs. (Plus: other "1" at the "t", the 3rd "U" -and their accents- are at the "v", "ò", "ó", "ô" and "ö", respectively.)
This is a clone of zimonart eYe/FSWell, I was not happy with the final look of my zelestia, so I tried to change the center of gravity of the font, which I managed to lighten its weight and basically alter its general appearance. I like this new, more dynamic and special look better... and I wish you would like it too. Let me know your opinion. Thanks a thousand.
Unicase italic font with many alternates (in the lower case zone), so much that it's almost like two fonts in one. Hope you like it.
This is a clone of zelestia eYe/FSelevator
This is a clone of Pixel SansVAN NELLE (Blueprint) — Geometric modernist sans
═══════════════════════════════════
☛ THE SOURCE
A re-interpretation of the 1926 geometric sans serif alphabet system reproduction by Jacob Jongert, published in a 1930 sourcebook by N.J. van de Vecht. The geometric uppercase set of the alphabet system is what would later become the famous sans serif capitals which he used for lettering throughout many of his Van Nelle materials.
☛ THE FONTSTRUCTION
Attempt at making a convincing recap of the original alphabet by Jacob Jongert as it was shown in the 1930s sourcebook, and extrapolate that into a full functional font. The decision to go with a small grid sparked a number of limitations in terms of the design freedom that forced some inevitable changes. But the general idea sort of became not to make it a revival, but rather more or less a faithful revision. One that would still be instantly recognizable yet didn't necessarily had to be all about accuracy.
☛ —The small grid design made sure this wasn't happening anyway!
But, for instance, the most striking difference between the two fonts (their weight) in fact is such a byproduct for one of those limitations. Something FS's small grid couldn't properly reproduce, so VAN NELLE (Blueprint) has a slight stronger weight, making the font somewhat of a bold style version of the original. This in addition provided me with slight extra freedom to inplement a little personal touch for further manicure of the font's finer details. Which allowed me to cope with some of the optical clunkiness that come with a fatter face and the grid based design.
Besides these circumstantial differences, which were basically beyond my control, I've also made some intentional changes to make the typeface more practical to use. The changes include things like the significantly lowered ascender height, the slight different width for certain letters, larger tittle (dot above i, j & ij), and several more. despite these changes I believe it very much still reflects what Jongerts once invisioned for the system.
☛ SOME NOTES ON THE ORIGINAL AND ITS CREATOR
Jacob Jongert(1883-1942) was a advertising designer from the Netherlands. After varied studies, including being Roland Holst’s assistant and an acquaintance and colleague of S. H. de Roos [who brought the Arts & Crafts ideas of William Morris to the Netherlands and devoted his career to book design and typography] with whom Jongert experimented with several printing techniques and discovered graphic design as his ideal art form.
¶ In 1923 Jongert rolled in a unique and long-term collaboration with the Van Nelle company, where he became head designer, a position he held until 1940. The Van Nelle company had an extremely modern approach towards advertising (they even commissioned Cassandre to do a poster) and Jongert created for the firm a recognizable image with clear shapes, powerful letters and primary colours, totally Dutch avant-garde in style, and with a strict and rigorous approach directly linked to De Stijl principles. The corporate identity he created has become a milestone in the design world.
¶ The lettering, however, is the driving force that ties it all together. The style is a straightforward set of plain, mono-linear, sans serif capitals in a style that just started to come into fashion in the late 1920s, early 1930s with the rise of functionalism and geometric type design. Yet, while these ideas were already thrown out there, its clever simplicity plus the systematic and cohesive way Jongert implemented his lettering was unusual at the time. The square and minimal construction of the forms allowed the letters to contract and expand to fit any situation, yet maintain a consistent and recognizable appearance throughout the Van Nelle line. ¶ Something we only recently have learned to appreciate is to see his hand crafted system amid the current advancements in variable-font technology, which offers a similar kind of flexibility to typeface designs. A quality that certainly placed him well ahead of its time.
What I particulary like about Jongert's original is the stuff that is going on in the lowercase set of the alphabet, which are those quirky lowercase letter inventions that are different from the more traditional modernist sans, but sadly the lowercase letters were pretty much never used in his works.
I created a simple PDF typeface specimen for those who want to see the high-resolution preview.
PDF SPECIMEN WAS DELETED
Thats all Folks ☚
☛ Cheers
Colourized and 3D version of "zeropixel", product of the union of the outline version plus the fill version (and a small displacement added). My admired four had the idea, so I have tried to put it into practice. Hope you like it.
This is a clone of zeropixel eYe/FSFill-font for zeropixel, which can also work on its own. Special edition at the suggestion of Bryndan W. Meyerholt (BWM).
This is a clone of zeropixel eYe/FS