Version 1.1
*
An alternate take of Diamond Eyes with circles replacing the 2 smallest diamonds. No brickswapping used - many diamonds shared bricks so I had to place the circles by hand. This permutation introduces more texture, solidity, and complexity to the original. Hope ya like it!
This is a clone of Diamond EyesVersion 1.1: Improved gy&Ѐ.
*
A greatly condensed Modron March.
This is a clone of Modron MarchA variant of Tangereen 3. Hard to read, but has a certain ornamental appeal.
Lately, I've been busy learning 3D modeling, vector art, and digital art things. So I only envision myself making more FontStructions when I need them for an existing project. I've already done all the designs based on my own past work - or at least, all the ones that are possible to create here.
This is a clone of Tangereen 3An even smaller and more stylized take on Madcat/Madkitten. It isn't really a Decolike anymore, but it is readable at smaller sizes than almost all my other designs!
This uses some compression/truncation tricks to fit glyphs into a smaller grid. Those tricks are usually used in pixel designs (such as Chlorophyte) but I think they worked out well here, too!
This is a cloneA vaguely Courierlike OSD (Onscreen Display) font which tries its best to be casual. The name is inspired by the old computer joke: "Who is General Failure and why is he reading my hard disk?"
No filters or faux-beziers, just stock bricks and a bit of stacking/nudging!
*
More about the design:
It started as a doodle and an attempt to make a smooth, low-resolution, low-poly font, and then it became a Courierlike. I have other fonts that tried to do polygonal round shapes before this (such as Cartoon Riot) but this design is my first real success in this area.
Initially, I made the angled glyphs before the round ones. I didn't want to change the angled ones, so glyphs like C, O, and Q became a bit wider than they are tall. I'm quite fond of this, because in most designs these glyphs tend to have a tall and narrow character. I think the mildly squat look of this font makes it cuter and gives it more personality.
A lot of glyphs were altered in specific ways to look more like metal type, especially anything with diacritics which touch the letters themselves. Other glyphs were altered specifically to be interpretable at small size. I also use angled contours and actual round bricks alongside each other within the same glyphs, another technique which is geared toward style and interpretability at small size.
This font came with many new challenges and an array of new techniques had to be designed. Loops were an insurmountable challenge because of the low resolution and heavy line weight, so I drew rounded areas to suggest them. You can see it on letters like Greek γ, ζ, and ξ.
Verbossus in sans-serif!
This is a clone of VerbossusA font which uses some custom macaroni bricks. This one has the same kind of structural asymmetry as Phenomenologist. Angles and corners on the left are almost always sharper than those on the right, which gives glyphs a structural asymmetry as well as a sense of rightward momentum. This technique also imparts variation to some otherwise very similar letterforms (bdpq, mw, sz).
This is named for a species of android from Doctor Who.
*
Other design decisions:
- Make the ascender height shorter than the uppercase
- Use squares for dots/diaresis and circles for punctuation, so that they are more quickly distinguished
- Allow the sharp curve and gentle curve to swap positions when it's beneficial to the glyph (BX8&)
- Incorporate angled lines into several glyphs so that none of the glyphs which have them seem out of place (SZsz012569*~$)
- Ignore the other design decisions for glyphs which need a standardized look due to their use in programming and other syntax-based forms of writing (most symbols & punctuation)
A "Connect bricks" font.
It's called linestrider because the outline strides across the inline on both sides. It also reminds me of the courses that are drawn for line-following robots.
The person I made this for requested lowercase. I'll add it as I can.
Third iteration of Tangereen with a bit of Paradoxy Effect. This one is rather fancy, so probably best used as a Display font.
The center portions of these glyphs make me think of sliced oranges and moon phases. They could act as cabochon settings, as well! So you could use these shapes to make jewelry set with a birthstone, monogrammed pendants/insignia, and so on.
Iteration 4: Basic Latin kerning finished.
*
DOODLE DOODLE DOODLE!
*
Design Rules:
1. Letters with spurs will have the spur begin at the baseline. This provides the distinctive "high heeled" look.
2. Any letter whose traditional design has a straight vertical line on its left side will keep the line, no matter how the lines of the actual letter travel.
Paradoxy Effect, without the Effect. Quite a drastic transformation!
This is a clone of Paradoxy EffectFont from the ingame marquee display of Barcade Brawl, a 2015 game by yours truly. This was made to look similar to the system fonts from old arcade boards, PC microsystems, etc. You've probably seen the fonts I'm talking about; they're everywhere and many people refer to them singularly as "the arcade font" or "the NES font".
This is 7x7 with no wasted matrix, but it looks better without monospacing since not every glyph is the same width. It also makes a decent terminal & chat font, at least for those who don't care about the case of the messages they read and write.
Feel free to use this in your games, etc.!
*
Original size: 5.25pt (use multiples of this size for pixel perfection)
A skeletal version of Modron March.
This is a clone of Modron MarchFormerly known as "Specula".
*
By request, a font with the two-toned look of a Pokéball. No filters! The Pokédollar sign can be found on "¢" and a Pokéball is on "•".
"Eviolite" is an item that powers up the defenses of Pokémon that are not fully evolved. Looks like a lavender-colored gem.
An experimental design using 1/8 weight lines alongside 1/16 ones. The 1/8 lines are the smallest that can be accurately nudged. Centering them is still a problem at times, and I need a few impossible composites to perfect the glyphs ABEFHKQRXYijkx34789, but overall I'm quite fond of how this doodle turned out.
I think I could use some intensive compositing to get rid of the central dividing line in glyphs like A and H. I'll give it a try when I can.
Version 1.5: All permutations of E and F were refined and improved.
*
A modernized, rounded, and truncated version of Marengi. This is made to be a good text editor/chat font. It has very few kerning pairs, so it should render fine in any software.
Ascenders are only allowed to be as tall as the uppercase/numerals, while descenders are allowed to go 2px below the line. This creates a natural line spacing that is readable and not too dense. (Diacritics break this rule, of course... darn them...)
Gone are the curved descenders/termini on letters like gjty. The simpler geometry makes this design more suited to speedreading than its predecessor. In fact, altering those four letters alone improves speedreading on this font by up to 14%!
*
09JUN2019: I have been using this as my main IRC/chat font for some time now. Of all my chatfont designs, this has proven the easiest to read and use.
*
MIV: 8.31
Original size: 6pt (use multiples of this size for pixel perfection)
The final Laconica?
This idea emerged while making Laconica Skeleton, so I decided to carry it out. The design reminds me of blueprints and floor plans, thus the name.
This is a clone of Laconica SkeletonAn alternate take on Eyeball Kids which has more expressive eyes.
*
Making this has given me an idea for an ASCII Roguelike tileset wherein lowercase letters represent juvenile creatures and uppercase letters represent adult ones.
This is a clone of Eyeball KidsHere we have a filled-counter pseudoserif pseudostencil that is also a borderline IVO design at the same time! It also has a bit of a "double font" look going on if you look at the negative space.
*
Design Rules:
1. Internal negative spaces of glyphs will be filled such that a 0.5-brick-wide void exists between the filled space and the glyphs themselves.
2. When a glyph's horizontal line intersects with the filled space created by Rule 1, both the filled space and the line will be broken.
3. Vertical lines will only connect by two tapering curves or by the implied connections created by filled negative space.
4. Filled negative spaces may only join with the outer perimeters of glyphs.
A design that combines tropes from fantasy, sci-fi, and sports in a subtle and pixel-optimized way.
Structurally, this looks like a high-res version of Marengi Mk2. There are still plenty of differences between the two, but since they seem equally readable to me, I'm tagging this as a chat font.
Semiserif semispur minimalism.
*
This design uses a few novel glyph-shapes and techniques to achieve its look. Most notable of these is the serifed a which lets the serif protrude to the right. I avoid this feature in almost all designs, especially pixel fonts, because it adds an unnecessary 1px of spacing - but for this font, the feature can be included without changing anything for the worse. Many other glyphs have this same sort of protruding serif/spur, and the slanted geometry of the serifs/spurs affords them a look that "retreats" from neighboring glyphs, rather than seeming to protrude into them.