The first version was made in less than 20 mins!
Currently has 16176 glyphs and counting!
Latest Update: Edited φ and ⱷ to match with the canIPA extensions and edited з and ԑ to match with Cyrillic and -Supplement.
Pro tip for Myanmar: Use ေ and ႄ before a consonant to get the optimal vowel placement.
Pro tip for Devanagari: Use ि and ॎ before a consonant to get the optimal vowel placement.
The Unicode bitmap font from Minecraft, also known as GNU Unifont. The game has a font priority system called "providers" that looks for bitmap data for a specific character in the non-Latin European character set first, then in the accented Latin character set, then in the game's low-res default font, then finally here, in the high-res Unicode character set. You can override this priority system by going into Options... > Language..., then setting "Force Unicode Font" to ON.
The game stores this font in images containing 16 rows and 16 columns of characters. Each character is 16 pixels wide and 16 pixels tall, totalling 256 characters per image. Each image represents one Unicode codepage, and there are 256 pages, which covers characters U+0000 to U+FFFF. Control characters and most CJK characters are omitted here, because FontStruct doesn't officially support them.
The font is not monospace, however, so the effective widths of each character are stored in a separate file called glyph_sizes.bin. Information for each character is stored in one byte, and the upper and lower 4 bits of this byte represent the start column and end column with a number ranging from 0 to 15, where 0 is the leftmost column of the character's allotted 16x16 space, and 15 is the rightmost column, respectively.
Knowing all of this allowed me to automate most of the steps involved in creating this recreation. I did not use the FontStructor to make this, I instead used a program to directly interact with FontStruct's API. It is possible to add unsupported characters to a font with this method, but I chose to stay within the limits of what is officially supported.
Updates:
Added Kana Extended and Kanbun
Hello everyone! This is a font based off of the Casio fx-ES Series Calculator text. I also included Hiragana and Katakana, though they're difficult. Cyrillic is slightly harder, but easy. Alternates are in Private Use Area!
Ver. 1.0(Beta, 9.21.2021): 1st release
--------------(When to start adding Chinese characters)---------------
Ver. 2.0(Beta): I found an Expert mode, so I added some Kanjis(一, 亜, 咽 and etc.)
Ver. 2.01(2022.05.22, Beta): More extended latin A and Added 31 Kanjis
Ver. 2.02(2022.05.25, Beta): Completed Latin ext_A block
Ver. 2.03(2022.05.26, Beta): Added CJK symbols block
Ver. 2.04(Beta): Plan of adding 20 Kanjis and Fixing glyph bugs
Ver. 2.05(2022.07.10, Beta): Added some of KS X 1001 symbols
Ver. 2.06(2022.07.11): Added 59 glyphs of Kanjis
Ver. 2.07(2022.07.12):Added some of Latin Ext_B glyphs
Ver. 2.08(2022.07.13):Added 30 glyphs of Kanjis more Latin Ext_B glyphs
Ver. 2.09(2022.07.14):Completed Latin Ext_B block and Added 15 glyphs of Hanjis and Fixed some of Hanji glyph's Bugs
Ver. 2.10(2022.07.18):Completed Hangul Compatibility Jamo Block and Added some glyphs of Latin Extended Additional Blocks
Ver. 2.11(2022.07.24):Completed Basic Russian Cylliric letters on 'Cylliric blocks'
Ver. 2.12(2022.07.25):More glyphs on Latin Exteneded Additional Blocks
-(CJK Unified Chinese Character Simplified Chinese Character Addition Start Time)------------------------------------------------------------
Ver. 3.0(2022.09.8~12): Added 30 glyphs of Cjk for Simplified Chinese
Ver. 3.1(2022.9.20): Some of more Kanjis
Ver. 3.1(2022.10.2~7): Added 30 glyphs of Kanjis
Ver. 3.2(2022.10.20~22): Added some of more kanjis
Ver. 3.21(2022.10.30): Added 8 glyphs of Cjk for Simplified Chinese
Ver. 3.3(2022.11.4):Added 10 glyphs of Latin and 6 glyphs of Hanguls
Ver. 3.4(2022.11.10):Added 21 glyphs of Cjk for Simplified Chinese
Ver. 3.41(2022.11.22):Added 10 glyphs of Cjk for Simplified Chinese
Ver. 3.41(2022.11.24):Added 15 glyphs of Cjk for Simplified Chinese
Ver. 3.42(2022.11.25):Added 10 glyphs of Cjk for Simplified Chinese
Ver. 3.43(2022.12.17):Added 15 glyphs of Cjk for Simplified Chinese
Ver. 3.5(2022.12.10):Added 10 glyphs of Cjk for Modern Chinese
Ver. 3.51(2022.12.21):Added 5 glyphs of Cjk for Modern Chinese
Ver. 3.6(2023.03.13):Added 10 glyphs of Cjk for Modern Chinese
Added so far of unified Kanji(Chinese) counts:Total of 293 glyphs
--------------------------Plans----------------------------------
1. Completing JIS 1 level of Kanjis
2. Completing JIS 2 level of Kanjis
3. Completing JIS 3 level of Kanjis
4. Making 2,351 glyphs of Hanguls(10/2351)
5. Adding extended Latin glyphs up to 'Latin extended additional'
6. Completing basic Arabic blocks
7. Completing Hanji glyphs on 'List of Frequently Used Characters in Modern Chinese'
8. Completing Hanji glyphs on 'BIG 5 Common Character Set'
9. Completing KS X 1001 symbols
10. Completing Hanji glyphs on 'Table of General Standard Chinise Character'
11. Completing 'Russian cylliric' block
12. Completing Hanji glyphs on 'Xim Sans' (Total of 17912 glyphs)
U+E000 is the .notdef glyph.
This is the largest Nokia font ever.
UPDATE [27 JUN 2023]: Fixed "ÿ". U+00FF
UPDATE [29 JUN 2023]: Fixed "ǐ". U+01D0
UPDATE [09 NOV 2023]: Fixed "ـ". U+0640
This font is a recreation of Minecraft's "Mojang" font. (Mojang)
With some extra characters. (...a lot of extra characters.) (Plus)
The font currently supports the following:
English / Spanish
Japanese
(Hirigana + Katakana, no CJK glyphs yet)
Russian
A few other languages (albeit little) like Hewbrew
(usually around like 2-10%)
Enjoy. :)
Font from the ingame marquee display of Barcade Brawl, a 2015 game by yours truly. This was made to look similar to the system fonts from old arcade boards, PC microsystems, etc. You've probably seen the fonts I'm talking about; they're everywhere and many people refer to them singularly as "the arcade font" or "the NES font".
This is 7x7 with no wasted matrix, but it looks better without monospacing since not every glyph is the same width. It also makes a decent terminal & chat font, at least for those who don't care about the case of the messages they read and write.
Feel free to use this in your games, etc.!
*
Original size: 5.25pt (use multiples of this size for pixel perfection)
~This "is" Minecraft Gnu font, except it has two times better quality and I added much more glyphs! Please tell me what characters should I add next :)
Update log
7/30/2022: Font created.
9/22/2023: Added Vietnamese characters.
10/11/2023: Added Superscripts & Subscripts, currency symbols and Arabic.
WHAT SHOULD I MAKE NEXT?
Ever seen the classic Minecraft font in languages like Russian, Greek, Polish, Vietnamese ... ?
It’s possible by downloading this font.
A Font inspired from Metal Gear Rising's Ingame HUD/Shop.
References: https://www.gameuidatabase.com/gameData.php?id=341
Cyrillic (Russo, Serb & Ukrainian) - Finished.
More/Extended Latin - More Latin (Completed) Extended Latin A (Completed) Extended Latin B (Completed)
Greek - (Completed)
Vietnamese - (Completed?)
CJK - (Experimental but too hard.)
Currently Supports:
- English
- Some Latin
- Russian Cyrillic
- Google Fonts
- Georgian
- Hebrew
- Armenian
- Greek
- Thai
- Currency Symbols
- Arabic (WIP)
- Japanese/Katakana
- Bopomofo
Version 1.5: All permutations of E and F were refined and improved.
*
A modernized, rounded, and truncated version of Marengi. This is made to be a good text editor/chat font. It has very few kerning pairs, so it should render fine in any software.
Ascenders are only allowed to be as tall as the uppercase/numerals, while descenders are allowed to go 2px below the line. This creates a natural line spacing that is readable and not too dense. (Diacritics break this rule, of course... darn them...)
Gone are the curved descenders/termini on letters like gjty. The simpler geometry makes this design more suited to speedreading than its predecessor. In fact, altering those four letters alone improves speedreading on this font by up to 14%!
*
09JUN2019: I have been using this as my main IRC/chat font for some time now. Of all my chatfont designs, this has proven the easiest to read and use.
*
MIV: 8.31
Original size: 6pt (use multiples of this size for pixel perfection)
It took me so long damn it
original work by Sed4tives
This is a clone of STF_BLACKPAPERA vaguely Courierlike OSD (Onscreen Display) font which tries its best to be casual. The name is inspired by the old computer joke: "Who is General Failure and why is he reading my hard disk?"
No filters or faux-beziers, just stock bricks and a bit of stacking/nudging!
*
More about the design:
It started as a doodle and an attempt to make a smooth, low-resolution, low-poly font, and then it became a Courierlike. I have other fonts that tried to do polygonal round shapes before this (such as Cartoon Riot) but this design is my first real success in this area.
Initially, I made the angled glyphs before the round ones. I didn't want to change the angled ones, so glyphs like C, O, and Q became a bit wider than they are tall. I'm quite fond of this, because in most designs these glyphs tend to have a tall and narrow character. I think the mildly squat look of this font makes it cuter and gives it more personality.
A lot of glyphs were altered in specific ways to look more like metal type, especially anything with diacritics which touch the letters themselves. Other glyphs were altered specifically to be interpretable at small size. I also use angled contours and actual round bricks alongside each other within the same glyphs, another technique which is geared toward style and interpretability at small size.
This font came with many new challenges and an array of new techniques had to be designed. Loops were an insurmountable challenge because of the low resolution and heavy line weight, so I drew rounded areas to suggest them. You can see it on letters like Greek γ, ζ, and ξ.
I use multiple text editors, and made this font to be an alternate font for Windows Notepad.
This was designed to be similar to Marengi Mk2, the font used in my FS Tutorials. Apart from using a smaller grid size, Eglantine achieves a closer line spacing through the use of short ascenders/descenders and the removal of the dots from i and j. It is also more condensed and optimized for speedreading, resulting in a font that is pleasant to read despite being quite small.
This design does have some wasted matrix, but this is necessary to achieve the desired effect. The global matrix is still only 7px tall, so this can still be used on most small canvasses.
*
Original Size: 4.5pt
Based off of a brief feature from Tech Time Traveller's The Computer Thing From Hell.
Expanded for multilingual support. Original designer of the font is Motorola.
Make sure to download as a TTF if you want pixel perfection!
Version of Homebrew 7x12 with letters d, g, and q changed to have the same ball top half as a.
CS is short for "consolidate".
Make sure to download as TTF if you want pixel perfection!
This is a clone of Homebrew 7x12