I joined Fontstruct to get special fonts for greeting cards I made. Over the years I have learned a lot from seeing the incredible variety of fonts created by members who are using just simple bricks, artistic experiments and a lot of patience; when cloning is allowed I can see and understand fine details to help me develop further, increase my confidence and stimulate my imagination.
I love to design and make fonts for family, friends, for special occasions, and to replace some of those more 'usual' basic fonts on my computer :)
Fontstructing since | 15th July, 2011 |
Fontstructions | 299 shared, 21 staff picks |
Shared Glyphs | 39211 |
Downloads | 3498 downloads made of this designer’s work |
Comments Made | 2830 |
An "almost sans serif" text font with an alternate g on the § because I couldn't decide which g was nicer. I have made all Latin sets. This replaces one of my computer's sans-serif fonts.
The Santa in the sample is one of the christmas-sy fonts I made.
For the moment this is the final version of Syngrapheis, reasonably extended. I'll add basic Greek and basic Cyrillic later because I think that the glyph shapes will look good in those writing systems. I've changed the 'g' since the sampler. I wish to offer this version to Google later so if you see any mistakes, strays or breaks etc please let me know.
This is a cloneI added the missing letters of the More Latin set and some on Latin1 plus numbers, some fun dingbats and the punctuation marks I use.
This is a clone of FS Flower ShopInspired by a Blackletter font in which I saw Art Deco qualities. The name comes from Norse/Viking mythology. It's great for headlines/titles and works nicely as majuscles for slab sans serif fonts.
No DL for this particular design but the initial font design will be tidied (has Latin & MoreLatin only) and made available before the end of next week.
Initially made for NW & SW European members' languages this typeface has grown over time to include glyphs for most European languages. My friend Ray will be happy to see Welsh and my friend Johneen can write in Maori :)
Thanks to TCWhite I've found the 2E2E point to place my favourite punctuation/symbol correctly.
I've sent this to be rewiewed for Google Fonts. Having done so I'm stuck, I don't know how to proceed there: how can I get people to look at it, comment?!
This is a clone of MasterClass 1Inspired by a video showing a hairdresser creating a wig for a play........
Many LC glyphs are an alternate to corresponding UC.
I haven't mastered creating good joints between FS bricks and the compos I need to make ""to join"" the two types of brick. Trying to get them to flow into each other produces more or less untidy joining in many places which I find frustrating. Maybe I have to sketch out simpler designs for easy Fontstructing.
Looking at the caron I wonder if the center cross-over brick needs replacing with the one that dips downwards? See the two different bricks in the caron of E and e.
This is a cloneI've offered this modern rectangular serif font to my class mates and friends when we met to celebrate an important anniversary of our Baccalaureat-Abitur.
There are just a few more symbols and dingbats I want to add but for the moment this is useable for letter heads and that weird stuff the 'High-Flyers' in our class ;) like to produce
@This is an extended version of Ostara Aria and more elaborate than the "Kerbe" designs. I changed the look of the LC and adjusted some of the UC.
Now the UC lace is better structured and distributed; glyphs A,N,M,U,V,X,Yand their LC, and @,7 and quotation marks have changed shape slightly; missing glyphs on the More Latin set (and the entire ExtendedLatin1 for my family, friends and aquaintances across Europe) needed quite some work due to the ornate sections - I hadn't planned on making this many glyphs, the ornate look was just intended for display UC of English, German and French and not for any other glyphs. Getting diacritics to look good with the decorated UC glyphs was a challenge but I think the ones I've decided to use don't overdo the ornateness nor distract from the glyph's shape.
Due to the new glyphs and diacritics I should have added 1 pixel height to accommodate the decorative lace element more obviously. Instead I changed some shape-rules ever so slightly to have an easier time adding the lace brick.
The LC is now solid black; diacritics have some added lace to integrate better in the design. The LC gives a separate font which might be of interest for headlines, advertising, on signs, cut to sew on fabric etc.
.
.
Note that there are still some adjustments/spacing needed; the kerning isn't finished yet either. I'm publishing this to get constructive comments -- and praise ;)
[youmoor]I plead for an algorythm that allows one strange/incomplete comment or (psychosocial) pinaillage for every 1 or 2 sincere (++explained) praises :D Applicable not every minute of the year you understand, only from GMT 0:001h Mondays to GMT 23:599h Sundays [/yoomoor].
The font's name is Malagache.
As I like the glyphs' shapes of midi-trente etc I let myself be inspired by fonts in FS 'op art' set to get an additional style for the "midi" series.
This is a cloneAfter Dmitriy added the beautiful Cyrillic set I added More Latin and some of that set's punctuation and symbols. That explains the "C+ML" of the name ;) I thought about adding Latin A but at the moment I can't figure out how to set the accents without breaking the ratio between UC-LC heights even further.
This is a clone of ABC CI love the look of this style. The name is self explanatory ;) if you know French.........
UC, numerals and some symbols have one line thicker than the others, LC only has the thinner lines. LC can be used on its own if even thickness of lines is desired but it is 3 px shorter than UC which will show clearly when using Basic Latin LC in combination with Hebrew, numerals, some symbols and some punctuation marks. Cyrillic and Hebrew added. Latin1 will come eventually ;)
Aenvidere (the normal weight version) still needs fine-tuning and kerning. That will come, eventually :) At the moment I'm quite busy doing too many things concurrently.
Check the font description for AlexGar-Aenvidere for details.
At a later date I'll publish a squared-off version of this. Aenvidere SQ will have the same glyph style but will be wider than the other versions which might make it less useful as a "tool" to attract attention when added as splash insert in text that uses another Aenvidere version.
An old font revisited and revitalised: now it's weird but fun. No diacritics, almost no punctuation nor symbols. Simply because I think this is not exactly useful ;)
This is a clone of Romaeo StandThicker lines than Aenvidere AGardin. This is quite chunky. Yet it remains rather (good looking and) elegant. Kerning has to be done (check details of this in the font description on Aenvidere AGardin)
This is a clone of Aenvidere StiloI was looking for some "decorative" glyphs to embellish greeting cards' frames; having come across one of my Greek sets I decided to make the whole Greek alphabet rather than stop at the 7 symbols I liked for my project.
Upgraded version of Aenvidere (which is the original 'normal weight' version) made for one of my grandsons. The glyphs in this version have lines of different thicknesses which seems to make them and any text more interesting to look at, yet it continues to be elegant.
Numerals are taller than other glyphs, I wonder if a larger letter space might 'integrate' them more when used in a line of text?
Kerning has been done where necessary = on very few pairs: T+some LCs and F+some LCs but not yet on T and F with the corresponding diacritics; also done are TJ and LT. The "f" has been moved in the grid, and "f" and "l" have adjusted letter space. I think that the shape of the glyphs (with and without adjusting their positions/letter space) reduces greatly the need for kerning. Having said all that I'll print some text to check and will adjust kerning where necessary ---at a later date.
This is the most advanced version of Aenvidere (due to kerning), the other published versions will be kerned at a later date. I'm showing them nevertheless so that you can compare versions.
This is a clone of AenvidereThis is the bolder version of INGEROL. Made for my uncle ROLF who is celebrating his birthday on the 28th August. I named the font for him and in loving memory of my aunt INGE who I miss very much. Love, Holli and Ninzi.
Not just a tad thicker lines but additionally I have changed quite a few glyphs' edges and even shapes. But I've maintained the original width of letters (exeptions: l, m, t, r, w, @) and numerals to allow using glyps of this clone as a kind of majuscule with Melusine.
This is a clone of Melusine