This is the first variation of the newer Hitachi LED fonts, and it is very similar to the older one. There are some differences, an example is that this one uses square dot-matrix. Another example is that the Number 0 looks more uglier. There are several more arrow styles that could be used on this font. The most used one is accessible by using [ (Up) and ] (Down). The uncommon ones use the rest of the special brackets available.

This is the smaller font used for all KONE lifts with KDS fixtures (except KDS 330 and 220). It is used when the display shows extra messages like "Fireman's Service" or "Out of Service". It is also used when the display shows 3-digit characters. The arrows I have included in here are the small arrows and the normal arrows, alongside a pair of custom arrows in case someone needs it.

Enjoy the font!

This is the smaller sized font for KONE lifts using KSS 570, 670 and 970 fixtures ONLY when the indicator is displaying special messages alongside the floor number. For destination dispatch, it uses another font. For KDS, it also uses a different font. For the arrows, I have included a pair of arrows that show when the indicator displays special messages and also I have included two pairs of some other custom arrows in case anyone needs to use it. And is it me or did KONE decide that the number 3 deserves an ugly look like that!?

Enjoy the font!

This font looks very similar to the KSS font, but there are some differences to the number 1, 6 and the arrows. I have included the KDS-330 dot-matrix arrow as the main arrow instead of the KSS scrolling arrow, and I have added the KDS scrolling arrow alongside it as this is a KDS fixture life and not KSS. Another thing i would like to say is that this dot-matrix font is also compatible with KDS-220 so feel free to use it on that fixture line if you need.

Enjoy the font!

Yes, the three-digit indicator version of this font DOES exist and believe me, it looks HILARIOUS! With a 5x14 dot scale it is very challenging to make. Okay now, back to the info of this font. This is the extra-small-sized bold Mitsubishi indicator font used in some 1st Generation Mitsubishi external hall indicators. It is used when the indicator displays three digits only. If the indicator needs to display 1-digit or 2-digit characters then it will use the larger fonts, which I have also made. Somehow, the Hong Kong version is slightly different as it uses square dots instead of circles. I have added both small and large arrows, as well as the extra-small arrows. Another set of items I have included in this font pack is the 1/2, 1/4 and 3/4 symbols for the extra-small size.

Enjoy the font!

Here is the small-sized bold Mitsubishi indicator font used in some 1st Generation Mitsubishi external hall indicators. It is used when the indicator displays two digits only. If the indicator needs to display 1-digit characters then it will use the larger font, which I have also made. Somehow, the Hong Kong version is slightly different as it uses square dots instead of circles. I have added both small and large arrows, as well as a pair custom arrows in case some of you might need it. Another set of items I have included in this font pack is the 1/2, 1/4 and 3/4 symbols.

Enjoy the font!

Here is the large-sized bold Mitsubishi indicator font used in some 1st Generation Mitsubishi external hall indicators. It is used when the indicator displays one digit only. If the indicator needs to display 2-digit characters then it will use the smaller font, which I have also made. Somehow, the Hong Kong version is slightly different as it uses square dots instead of circles. I have added both small and large arrows, as well as a custom arrow in case some of you might want it. Another set of things I have included in this font pact is the 1/2, 1/4 and 3/4 symbols. Normally, it’s not used by itself but paired with a number. And if it’s paired with another character, the thinner font will be used with it, and not this one. So I don’t expect anyone to use this unless they need it for displayin single-character indicators.

This font is mainly used for KONE KSS 570, 670 and 970. It is also used for KSS 800 but as there are different arrows for that, I will make another version. The KDS-330 dot-matrix font is very slightly different so I will make another font on thatr. There will also be a smaller version of this font for indicators used in Destination Dispatch or indicators which have 3 or more digits. There is a special batch of arrows included in this font which is the pentagonal arrow which could be seen in the KSS brochures but not used in the fixtures.

Enjoy the font!

Here is my go on Schindler’s new “Thin LED” font which they use for FI GS 100 and 120, and also newer Linea 100 (for 5500). Most characters in this font pack are 4x7 in dots, but some of them are 5x7 (The actual LEDs do that for some reason). There is also the exterior indicator’s large arrows, and also the small arrows used on the Landing Operating Panel’s indicator. There is also a medium sized arrow used for the COP indicator whenever the lift stops. These are all obtainable by using the special brackets. Enjoy the font!

This is the font used on some Schindler lifts with S-Series fixtures, and they do look really weird. This is because this type of indicator has a limited number of LEDs unlike the full 5x8 LED which is also used on M-Line. Watch mrmattandmrchay's video about this: https://youtu.be/RsPrH0eojiY . They could have done something to the numbers to make them look better, especially 2 and 3. I have added some extra FI-MXB/V arrows in case anyone needs it. I have also added in Up/Down arrows when the lift stays idle. The three new arrows could be obtained by using =, \, and | (the weird long divider stick that looks like an “I”). It is normally coloured green, but in rare cases they have it coloured red. You could do anything to the colours of this. Enjoy the font!

Just a basic OTIS Dot-Matrix LED font used on Japanese OTIS Gen2 Lifts. It could be coloured in Orange (Default) or White, but after downloading, this font is yours so you could do anything you like to it. There are three different arrows on this one: Default, Long and Custom. All are obtainable by using the special brackets which could be found directly on your keyboard. IMO this font is very similar to Schindler’s Thin LED; some are 4x7, some are 5x7. Enjoy the font!

This is the font used on Schindler lifts with original M-Line indicators. This font is also used on S-Line 2nd Generation. Though it is not used on FI MXB as that has it’s own separate 5x9 font. I have added extra arrows to this one for S-Line and FI MXB in case any of you need to use it. As always, it is obtainable by using the special brackets. I have also added extra 1/4 and 1/2 characters but that doesn’t exist in real life (Obtainable by using PowerPoint’s Insert > Symbols > Special Characters > {Choose special character}). Enjoy the font!

This is my version of Mitsubishi’s small LED Dot-Matrix font which they use for three-digit numbers and characters. It it 3x7 in dots which fits perfectly onto the 10x7 display. Sadly, FontStruct doesn’t not allow me to make the signature Mitsubishi arrows, so I made a similar one instead. I sincerely apologise for the inconvenience. Other than that, the font pack looks fine and very similar to the real one. I have also added extra arrows in like the old handicap panel arrow that they use on the 1st and 2nd generation fixtures (obtainable by using special brackets as always). Enjoy the font!

This is my go on the Mitsubishi Dot-Matrix LED font which is still being used nowadays. I think it is pretty accurate enough, but sadly FontStruct doesn’t allow me to make the signature Mitsubishi arrow. I sincerely apologize for that. Normally the colour is orange, but feel free to change things up whenever you wish. I have added the 1/2 into this font pack, it is obtainable by using the special characters chart in PowerPoint once you have clicked into the “Symbols” button inside the “Insert” section. Enjoy the font!